Instrukcja obsługi Roland V-4EX


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland V-4EX (64 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/64
Owner's Manual
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
* Roland is either registered trademark or trademark of Roland Corporation in the United States and/or other countries.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” (p. 3) and
“IMPORTANT NOTES (p. 5). These sections provide important information concerning the
proper operation of the unit. Additionally, in order to feel assured that you have gained a good
grasp of every feature of your new unit, owner’s manual should be read in its entirety. This manual
should be saved and kept on hand as a convenient reference.
2
3
WARNING
001-60
To completely turn o power to the unit, pull out
the plug from the outlet
• Even with the power switch turned o, this unit is not
completely separated from its main source of power. When
the power needs to be completely turned o, turn o the
power switch on the unit, then pull out the plug from the
outlet. For this reason, the outlet into which you choose to
connect the power cord’s plug should be one that is within
easy reach and readily accessible.
001-70
Concerning the AUTO OFF function
• The power to this unit will be turned o automatically
after a predetermined amount of time has passed
since its buttons or controls were last operated (AUTO
OFF function). If you do not want the power to be turned o
automatically, disengage the AUTO OFF function (p. 10).
002d
Do not disassemble or modify by yourself
• Do not open or perform any internal modications on the
unit or its AC adaptor. (The only exception would be where
this manual provides specic instructions which should be
followed in order to put in place the video fader; see p. 57.)
003
Do not repair or replace parts by yourself
• Do not attempt to repair the unit, or replace parts within
it (except when this manual provides specic instructions
directing you to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an authorized Roland
distributor, as listed on the “Information sheet.
004
Do not use or store in the following types of
locations
• Subject to temperature extremes (e.g., direct sunlight in
an enclosed vehicle, near a heating duct, on top of heat-
generating equipment); or are
• Damp (e.g., baths, washrooms, on wet oors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and shakiness.
WARNING
007
Do not place in an unstable location
• Make sure you always have the unit placed so it is level and
sure to remain stable. Never place it on stands that could
wobble, or on inclined surfaces.
008c
Use only the supplied AC adaptor and the correct
voltage
• Be sure to use only the AC adaptor supplied with the unit.
Also, make sure the line voltage at the installation matches
the input voltage specied on the AC adaptors body. Other
AC adaptors may use a dierent polarity, or be designed
for a dierent voltage, so their use could result in damage,
malfunction, or electric shock.
008e
Use only the supplied power cord
• Use only the attached power-supply cord. Also, the supplied
power cord must not be used with any other device.
009
Do not bend the power cord or place heavy
objects on it
• Do not excessively twist or bend the power cord, nor
place heavy objects on it. Doing so can damage the cord,
producing severed elements and short circuits. Damaged
cords are re and shock hazards!
011
Don’t allow foreign objects or liquids to enter
unit; never place containers with liquid on unit
• Do not place containers containing liquid (e.g., ower vases)
on this product. Never allow foreign objects (e.g., ammable
objects, coins, wires) or liquids (e.g., water or juice) to enter
this product. Doing so may cause short circuits, faulty
operation, or other malfunctions.
USING THE UNIT SAFELY


Specyfikacje produktu

Marka: Roland
Kategoria: nieskategoryzowany
Model: V-4EX
Kolor produktu: Czarny
Rodzaj zasilania: Prąd przemienny
Wbudowany wyłącznik: Tak
Wbudowany wyświetlacz: Tak
Typ wyświetlacza: LCD
Wysokość produktu: 105 mm
Szerokość produktu: 225 mm
Głębokość produktu: 296 mm
Waga produktu: 2600 g
Podręcznik użytkownika: Tak
Gniazdko wyjścia DC: Tak
Zasilacz sieciowy: Tak
Typ HD: Full HD
Rozdzielczość: 320 x 240 px
Przewody: Prąd przemienny
Przewodowa sieć LAN: Nie
Prąd wyjściowy: 2 A
Możliwości montowania w stelażu: Nie
Obsługiwane tryby wideo: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Rozdzielczości wideo: 640 x 480,800 x 600,1024 x 768,1280 x 1024,1366 x 768,1400 x 1050,1600 x 1200,1920 x 1200 px
System formatu sygnału analogowego: NTSC, PAL
Wyjścia BNC: 1
Wejścia VGA (D-Sub): 1
Wejścia BNC: 4
Stopień kompresji: 4:2:2
Cyfrowe efekty wideo (DVE): Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland V-4EX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Roland

Roland

Roland GK-KIT-BG Instrukcja

12 Września 2024
Roland

Roland MVS-12 Instrukcja

12 Września 2024
Roland

Roland V-800HD Instrukcja

12 Września 2024
Roland

Roland XI-DANTE Instrukcja

12 Września 2024
Roland

Roland XI-REAC Instrukcja

12 Września 2024
Roland

Roland S-4000M Instrukcja

12 Września 2024
Roland

Roland CB-37SY Instrukcja

12 Września 2024
Roland

Roland SO-AES4 Instrukcja

12 Września 2024
Roland

Roland TD-12K Instrukcja

12 Września 2024
Roland

Roland CB-CS2 Instrukcja

12 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024