Instrukcja obsługi Roland UA-4FX2

Roland Niesklasyfikowane UA-4FX2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland UA-4FX2 (18 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/18
1
Owner’s Manual
UA-4FX2
Before using this unit, carefully read “USING THE UNIT SAFELY” (p. 16) and “IMPORTANT NOTES” (p. 17). After reading, keep the document(s) where it will
be available for immediate reference.
Copyright © 2017 ROLAND CORPORATION
Contents of the Package
5UA-4FX2
5Owner’s Manual (this document)
5USB cable
Installing the Driver
* Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.
Windows 10 Users
1. Use the included USB cable to connect the UA-4FX2 to your computer.
The driver is installed automatically.
Windows 7 or Windows 8.1 Users
NOTE
Don’t connect the UA-4FX2 to your computer before installing the driver.
If you’ve already connected the UA-4FX2, temporarily disconnect it.
When the screen indicates “Ready to install the driver. ---,” connect the UA-4FX2.
1. Start up Windows with all USB cables disconnected other than the cables of your keyboard and mouse.
2. Download the driver from the following URL.
&
http://roland.cm/ua4fx2
3. Before you begin installation, close all applications.
4. Unpack the downloaded Zip le, and double-click “Setup.”
5. If a user account control conrmation screen appears, click [Yes].
6. In the dialog box that indicates “UA-4FX2 Driver will be installed on your computer. ---,” click [Next].
* If any other message appears, proceed as directed by the message.
7. To begin installation, click [Next].
8. If a Windows security dialog box appears, click [Install].
9. Note the dialog box that indicates “Ready to install the driver. ---”
* If any other message appears, proceed as directed by the message.
10. Use the included USB cable to connect the UA-4FX2 to your computer.
The driver is installed automatically.
11. In the dialog box that indicates “Installation has been completed.”, click [Close].
12. If the “System Settings Change” dialog box appears, click [Yes] and restart Windows.
2
Mac Users
NOTE
Don’t connect the UA-4FX2 to your computer before installing the driver.
If you’ve already connected the UA-4FX2, temporarily disconnect it.
Connect the UA-4FX2 after driver installation is completed.
1.
Start up your Mac with all USB cables disconnected other than the cables of your keyboard and mouse.
2.
Download the driver from the following URL.
&
http://roland.cm/ua4fx2
3.
Before you begin installation, close all applications.
4.
Unpack the downloaded le, and double-click “UA4FX2_USBDriver.”
5.
In the dialog box that says “This package checks whether the software can be installed. ---” click [Continue].
* If any other message appears, proceed as directed by the message.
6.
In the dialog box “Welcome to the UA-4FX2 Driver Installer,” click [Continue].
7.
To begin installation, click [Install].
* If any other message appears, proceed as directed by the message.
8.
When the installation is completed, click [Restart] to restart your computer.
9.
Use the included USB cable to connect the UA-4FX2 to your Mac.
Checking That You Hear Sound
1.
Connect headphones or amplied speakers.
Windows Users
2.
Open “Control Panel,” click [Hardware and Sound], and then click [Sound].
If the “View” is [Large Icons] or [Small Icons], double-click [Sound].
3.
Click the [Playback] tab, click the UA-4FX2’s [OUT], and then click the [Set Default] button.
4.
Right-click the UA-4FX2’s “OUT,” and click [Test] to verify that you hear sound.
5.
Click [OK].
Mac Users
2.
Open “System Preferences,” and click the [Sound] icon.
3.
Click the [Output] tab, and click [UA-4FX2].
4.
Click the [Sound Eects] tab, and click the [Output Volume] slider to check the sound.
5.
Close “System Preferences.”
3
Panel Descriptions
Left side
MIC/GUITAR jack
Connect a mic or guitar here. Use the [MIC/GUITAR] knob
to adjust the volume.
Phantom power is not supplied.
MIC jack (XLR type)
This is an analog audio input jack that provides a mic
preamp. Both balanced and unbalanced connections are
supported.
Condenser mic Turn the [PHANTOM] switch on.
Input rating: -50– -18 dBu
Dynamic mic The [PHANTOM] switch must be o.
Input rating: -56– -24 dBu
* Pin assignment of MIC jack (XLR type)
1: GND
2: HOT
3: COLD
PHONES/HEADSET jack
Connect headphones or earphones (headsets) that are
compatible with four-conductor mic inputs.
Use the [MIC/GUITAR] knob to adjust the mic volume of
the headset.
LINE IN jack
The audio signal from an audio device or MIDI sound
module can be input here. Use a stereo mini-type cable to
make this connection.
Use the [LINE IN] knob to adjust the volume of the audio
signal.
Right side
[PHANTOM] switch
This turns on/o the phantom power that is supplied to
the MIC jack (XLR type).
You must leave this switch turned o unless a condenser
mic that requires phantom power is connected. Supplying
phantom power to a dynamic mic or an audio playback
device will cause malfunctions.
For details on the specications of your mic, refer to the
owner’s manual of your mic.
(The UA-4FX2’s phantom power supply: DC48 V, 6 mA Max)
[MIC/GUITAR] switch
Set this to “MIC” if you’re using a mic, or to “GUITAR” if
you’re using a guitar.
* Before changing the setting of this switch, minimize the
volume of the connected device.
USB port
Use the included USB cable to connect this to your
computer so that audio signals can be sent and received.

Specyfikacje produktu

Marka: Roland
Kategoria: Niesklasyfikowane
Model: UA-4FX2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland UA-4FX2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Roland

Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024
Roland

Roland RD-300GX Instrukcja

13 Października 2024
Roland

Roland Fantom FA-76 Instrukcja

12 Października 2024
Roland

Roland M-1000 Instrukcja

12 Października 2024
Roland

Roland RD-88 EX Instrukcja

9 Października 2024
Roland

Roland VR-400UHD Instrukcja

7 Października 2024
Roland

Roland KD-200 Instrukcja

7 Października 2024
Roland

Roland DM-10 Instrukcja

5 Października 2024
Roland

Roland RD-08 Instrukcja

4 Października 2024
Roland

Roland RCP800 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Florabest

Florabest HG05806 Instrukcja

15 Października 2024