Instrukcja obsługi Roland SP-606

Roland nieskategoryzowany SP-606

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland SP-606 (104 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/104

Thank you, and congratulations on your choice of the Roland Sampling Workstation

SP-606.

201a

Before using this unit, carefully read the sections entitled: “USING THE UNIT

SAFELY” and “IMPORTANT NOTES” (p. 2–3; p. 4–6). These sections provide

important information concerning the proper operation of the unit. Additionally,

in order to feel assured that you have gained a good grasp of every feature

provided by your new unit, Owner’s manual should be read in its entirety. The

manual should be saved and kept on hand as a convenient reference.

202

without the written permission of ROLAND CORPORATION.

Owner’s Manual

USING THE UNIT SAFELY

001

• Before using this unit, make sure to read the

instructions below, and the Owner’s Manual.

................................................................................................

002c

• Do not open (or modify in any way) the unit

or its AC adaptor.

................................................................................................

003

• Do not attempt to repair the unit, or replace

parts within it (except when this manual

provides specific instructions directing you

to do so). Refer all servicing to your retailer,

the nearest Roland Service Center, or an

authorized Roland distributor, as listed on

the “Information” page.

................................................................................................

004

• Never use or store the unit in places that are:

• Subject to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle, near

a heating duct, on top of heat-generating

equipment); or are

• Damp (e.g., baths, washrooms, on wet

floors); or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

................................................................................................

007

• Make sure you always have the unit placed

so it is level and sure to remain stable. Never

place it on stands that could wobble, or on

inclined surfaces.

008c

• Be sure to use only the AC adaptor supplied

with the unit. Also, make sure the line

voltage at the installation matches the input

voltage specified on the AC adaptor’s body.

Other AC adaptors may use a different

polarity, or be designed for a different

voltage, so their use could result in damage,

malfunction, or electric shock.

................................................................................................

009

• Do not excessively twist or bend the power

cord, nor place heavy objects on it. Doing so

can damage the cord, producing severed

elements and short circuits. Damaged cords

are fire and shock hazards!

................................................................................................

010

• This unit, either alone or in combination with

an amplifier and headphones or speakers,

may be capable of producing sound levels

that could cause permanent hearing loss. Do

not operate for a long period of time at a high

volume level, or at a level that is uncom-

fortable. If you experience any hearing loss or

ringing in the ears, you should immediately

stop using the unit, and consult an audiol-

ogist.

................................................................................................

011

• Do not allow any objects (e.g., flammable

material, coins, pins); or liquids of any kind

(water, soft drinks, etc.) to penetrate the unit.

Used for instructions intended to alert

the user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic

animals or pets.

Used for instructions intended to alert

the user to the risk of death or severe

injury should the unit be used

improperly.

The ●symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In

the case of the symbol at left, it means that the power-

cord plug must be unplugged from the outlet.

The symbol alerts the user to important instructions

or warnings.The specific meaning of the symbol is

determined by the design contained within the

triangle. In the case of the symbol at left, it is used for

general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never

be carried out (are forbidden). The specific thing that

must not be done is indicated by the design contained

within the circle. In the case of the symbol at left, it

means that the unit must never be disassembled.

012c

• Immediately turn the power off, remove the

AC adaptor from the outlet, and request

servicing by your retailer, the nearest Roland

Service Center, or an authorized Roland

distributor, as listed on the “Information”

page when:

• The AC adaptor or the power-supply cord

has been damaged; or

• If smoke or unusual odor occurs

• Objects have fallen into, or liquid has been

spilled onto the unit; or

• The unit has been exposed to rain (or

otherwise has become wet); or

• The unit does not appear to operate

normally or exhibits a marked change in perfor-

mance.

................................................................................................

013

• In households with small children, an adult

should provide supervision until the child is

capable of following all the rules essential for

the safe operation of the unit.

................................................................................................

014

• Protect the unit from strong impact.

(Do not drop it!)

................................................................................................

015

• Do not force the unit’s power-supply cord to

share an outlet with an unreasonable number

of other devices. Be especially careful when

using extension cords—the total power used

by all devices you have connected to the

extension cord’s outlet must never exceed the

power rating (watts/amperes) for the

extension cord. Excessive loads can cause the

insulation on the cord to heat up and

eventually melt through.

................................................................................................

016

• Before using the unit in a foreign country,

consult with your retailer, the nearest Roland

Service Center, or an authorized Roland

distributor, as listed on the “Information”

page.

................................................................................................

023

• DO NOT play a CD-ROM disc on a conven-

tional audio CD player. The resulting sound

may be of a level that could cause permanent

hearing loss. Damage to speakers or other

system components may result.

101b

• The unit and the AC adaptor should be

located so their location or position does not

interfere with their proper ventilation.

................................................................................................

102d

• Always grasp only the output plug or the

body of the AC adaptor when plugging into,

or unplugging from, this unit or an outlet.

................................................................................................

103b

• At regular intervals, you should unplug the

AC adaptor and clean it by using a dry cloth

to wipe all dust and other accumulations

away from its prongs. Also, disconnect the

power plug from the power outlet whenever

the unit is to remain unused for an extended

period of time. Any accumulation of dust

between the power plug and the power

outlet can result in poor insulation and lead

to fire.

................................................................................................

104

• Try to prevent cords and cables from

becoming entangled. Also, all cords and

cables should be placed so they are out of the

reach of children.

................................................................................................

106

• Never climb on top of, nor place heavy

objects on the unit.

................................................................................................

107d

• Never handle the AC adaptor body, or its

output plugs, with wet hands when plugging

into, or unplugging from, an outlet or this

unit.

................................................................................................

108b

• Before moving the unit, disconnect the AC

adaptor and all cords coming from external

devices.

................................................................................................

109b

• Before cleaning the unit, turn off the power

and unplug the AC adaptor from the outlet

(p. 21).

................................................................................................

110b

• Whenever you suspect the possibility of

lightning in your area, disconnect the AC

adaptor from the outlet.

................................................................................................

118c

• Keep any screws you may remove and the

included card theft prevention cover in a safe

place out of children’s reach, so there is no

chance of them being swallowed accidentally.

Specyfikacje produktu

Marka:	Roland
Kategoria:	nieskategoryzowany
Model:	SP-606

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland SP-606, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Roland

Roland GK-KIT-BG Instrukcja

12 Września 2024

Roland MVS-12 Instrukcja

12 Września 2024

Roland V-800HD Instrukcja

12 Września 2024

Roland XI-DANTE Instrukcja

12 Września 2024

Roland XI-REAC Instrukcja

12 Września 2024

Roland S-4000M Instrukcja

12 Września 2024

Roland CB-37SY Instrukcja

12 Września 2024

Roland SO-AES4 Instrukcja

12 Września 2024

Roland TD-12K Instrukcja

12 Września 2024

Roland CB-CS2 Instrukcja

12 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024

Emko EZM-9920 Instrukcja

27 Października 2024

Emko ESM-3712-H Instrukcja

27 Października 2024

Emko ATS-10 Instrukcja

27 Października 2024

Emko EAOM-11.2 Instrukcja

27 Października 2024

Emko EPM-3790 Instrukcja

27 Października 2024

Emko EPM-7790 Instrukcja

27 Października 2024

Livarno Lux IAN 108340 Instrukcja

27 Października 2024

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024