Instrukcja obsługi Roland RT-10

Roland Niesklasyfikowane RT-10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland RT-10 (18 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/18

04232178 ’06-4-2N * 0 4 2 3 2 1 7 8 - 0 2 *

Owner’s Manual

Thank you, and congratulations on your choice of the Roland RT-10 series.

201a

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (p. 2; p. 3). These sections provide important information concerning the

proper operation of the unit. Additionally, in order to feel assured that you have gained a good

grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety.

The manual should be saved and kept on hand as a convenient reference.

202

permission of ROLAND CORPORATION.

VERY IMPORTANT!!!

• (p. 6)Mounting The Drum Trigger Correctly

• (p. 14)Setting Trigger Parameters in a Percussion Sound Module

USING THE UNIT SAFELY

001

• Before using this unit, make sure to read the

instructions below, and the Owner’s

Manual.

..................................................................................................

002a

• Do not open or perform any internal modifi-

cations on the unit.

..................................................................................................

003

• Do not attempt to repair the unit, or replace

parts within it (except when this manual

provides specific instructions directing you

to do so). Refer all servicing to your retailer,

the nearest Roland Service Center, or an

authorized Roland distributor, as listed on

the “Information” page.

..................................................................................................

004

• Never use or store the unit in places that

are:

• Subject to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle,

near a heating duct, on top of heat-gener-

ating equipment); or are

• Damp (e.g., baths, washrooms, on wet

floors); or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

..................................................................................................

013

• In households with small children, an adult

should provide supervision until the child

is capable of following all the rules essential

for the safe operation of the unit.

..................................................................................................

014

• Do not drop it!

104

• Try to prevent cords and cables from

becoming entangled. Also, all cords and

cables should be placed so they are out of

the reach of children.

..................................................................................................

106

• Never climb on top of, nor place heavy

objects on the unit.

..................................................................................................

118a

• Should you remove the hoop guard and the

sensor bolt/nut, keep them in a safe place

out of children’s reach, so there is no chance

of them being swallowed accidentally.

Used for instructions intended to alert

the user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic

animals or pets.

Used for instructions intended to alert

the user to the risk of death or severe

injury should the unit be used

improperly.

The ● symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In

the case of the symbol at left, it means that the power-

cord plug must be unplugged from the outlet.

The symbol alerts the user to important instructions

or warnings.The specific meaning of the symbol is

determined by the design contained within the

triangle. In the case of the symbol at left, it is used for

general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never

be carried out (are forbidden). The specific thing that

must not be done is indicated by the design contained

within the circle. In the case of the symbol at left, it

means that the unit must never be disassembled.

IMPORTANT NOTES

291a

In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and

observe the following:

Placement

354a

• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle,

or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.

Maintenance

401a

• For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To

remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe

the unit thoroughly with a soft, dry cloth.

402

• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or

deformation.

Additional Precautions

553

• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks

and connectors. Rough handling can lead to malfunctions.

556

• When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will

avoid causing shorts, or damage to the cable’s internal elements.

558b

• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is late at

night).

988

• Security Slot ( )

http://www.kensington.com/

Specyfikacje produktu

Marka:	Roland
Kategoria:	Niesklasyfikowane
Model:	RT-10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland RT-10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Roland

Roland KS-V7 Instrukcja

29 Grudnia 2024

Roland CYQ-12 Instrukcja

21 Grudnia 2024

Roland PDQ-8S Instrukcja

21 Grudnia 2024

Roland PD-14DSX Instrukcja

10 Grudnia 2024

Roland V71 Editor Instrukcja

10 Grudnia 2024

Roland KD-22 Instrukcja

10 Grudnia 2024

Roland Bridge Cast One Instrukcja

10 Grudnia 2024

Roland NEQ-H Instrukcja

10 Grudnia 2024

Roland Graphics Presenter Instrukcja

10 Grudnia 2024

Roland KD-18 Instrukcja

10 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025

Crivit IAN 290909 Instrukcja

15 Stycznia 2025

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025