Instrukcja obsługi Roland CY-18DR

Roland Niesklasyfikowane CY-18DR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland CY-18DR (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (p. 4). After reading, keep the document(s) where it will be available for
immediate reference.
Copyright © 2016 ROLAND CORPORATION
Owner’s Manual
2
Making the Settings
Check the Included Items
After opening the package, check that all of the included items are
present. If anything is missing, contact your dealer.
CY-18DR
Wing nut
Felt washer
Stopper
Connection cable
Cable tie
Owner’s manual (this document)
CY-18DR Components
Bow
Edge
FUNC button (*1)
DIGITAL TRIGGER OUT connector
(*1) This button will be used in the event of a future upgrade.
* It is not normally used.
Mounting on the Stand
1. Use a commercially available drum key to tighten the
stopper bolt.
The stopper keeps the V-Cymbal from turning, preventing the
tangling of cables on the stand.
Stopper
Attach the stopper
so that the bolt is on
the right-hand side,
from the performer’s
perspective.
Bolt
Tighten the bolt
with a commercially
available drum key.
2. Attach the V-Cymbal, while positioning it so the Roland
logo is located on the side opposite the performer.
Wing nut
Felt washer
Position the Roland logo
on the opposite side of the
playing area
3. Tighten the included felt washer and the wing nut to
obtain the desired movement.
* Use the included felt washer and wing nut.
* Double sounding may occur if the wing nut is loose.
4. Insert the plug of the connection cable into the CY-18DR’s
DIGITAL TRIGGER OUT connector.
Connection cable
Protector
Use the protector to lock the
connection.
5. Secure the cables in place with the cable tie.
Leave some slack in the cables to ensure they are not pulled by the
movement of the V-Cymbal pads.
Be sure to make this
small plastic hook
visible from you.
Wind a cable tie around a cable.
Wind a cable tie around the pipe and
tighten it in order to not to slip.
Insert the small
plastic hook to a
hole to secure the
cable to the cymbal arm.
Secure the cable in place
with the cable tie
k in the cable
* Take care to ensure that the cables do not touch the V-Cymbal
pads and/ or the stand. A cable touching a V-Cymbal pad or a
stand may cause double sounding or other incorrect operation.
3
Main Specications
Roland CY-18DR: V-Cymbal Digital Ride
Size 18 inches
Triggers 3 (Bow/Bell/Edge)
Connector DIGITAL TRIGGER OUT connector
(compatible with Roland drum sound module equipped with DIGITAL TRIGGER IN port)
Power Supply DIGITAL TRIGGER bus power (DC 5 V)
Current draw 90 mA
Dimensions 470 (W) x 470 (D) x 55 (H) mm
18-9/16 (W) x 18-9/16 (D) x 2-3/16 (H) inches
Weight 2.1 kg / 4 lbs 11 oz
Accessories Owner’s manual, Wing nut, Felt washer, Stopper, Connection cable, Cable tie
Options
(sold separately)
Cymbal mount (MDY series)
Cymbal parts set (CYM-10)
* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the Roland
website.
Connecting to the Drum Sound Module
Use a Roland drum sound module that supports digital
connections.
1. Insert the plug of the connection cable into the drum
sound module’s DIGITAL TRIGGER IN port.
2. On the drum sound module, make settings for using the
CY-18DR.
* For details, refer to the owner’s manual of your drum sound
module.
Recommended settings for the trigger parameters
The rst time you connect the CY-18DR to your drum sound
module, the recommended values are assigned to the trigger
parameters.
You may need to adjust the trigger parameters depending on how
you’ve mounted the CY-18DR and the location at which you’ve
installed it.
For details on editing refer to the owner’s manual of your drum
sound module.
Playing Method
The response to various playing methods depends on the drum
sound module.
For details, refer to the owner’s manual of your drum sound module.
NOTE
5Use only wooden or plastic sticks. Using a carbon or metal
stick may cause the sensor to malfunction.
5Use nylon brushes. Using metal brushes may cause the
sensor to malfunction, and may scratch the pad.
Playing method Explanation
Bow shot Nuance changes depending
on the strike location This is the most common playing
method, playing the middle area of the
cymbal. It corresponds to the sound
of the “head-side” of the connected
trigger input.
Edge shot
Edge sensor
This playing method involves striking
the edge with the shoulder of the stick.
When played as shown in the gure,
the rim sound of the connected input
is triggered.
Bell shot
This is the technique of striking the
bell.
Striking the bell area will produce the
rim sound of the connected trigger
input.
Strike using the shoulder of the stick.
Choke play
Edge sensor
Sensor
If you use your hand to choke (grasp)
the edge sensor after striking the
cymbal, the sound stops.
In addition, placing your hand on the
sensor will also stop the sound (mute).
If you strike the cymbal in a choked or
mute state, it rings a shorter time.

Specyfikacje produktu

Marka: Roland
Kategoria: Niesklasyfikowane
Model: CY-18DR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland CY-18DR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Roland

Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024
Roland

Roland RD-300GX Instrukcja

13 Października 2024
Roland

Roland Fantom FA-76 Instrukcja

12 Października 2024
Roland

Roland M-1000 Instrukcja

12 Października 2024
Roland

Roland RD-88 EX Instrukcja

9 Października 2024
Roland

Roland VR-400UHD Instrukcja

7 Października 2024
Roland

Roland KD-200 Instrukcja

7 Października 2024
Roland

Roland DM-10 Instrukcja

5 Października 2024
Roland

Roland RD-08 Instrukcja

4 Października 2024
Roland

Roland RCP800 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Florabest

Florabest HG05806 Instrukcja

15 Października 2024