Instrukcja obsługi Rel T serie

Rel głośnik T serie

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rel T serie (21 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
Opera0ng Instruc0ons for the
SerieT
Sub-Bass
Systems
1
1 Read all of these instrucons.
2 Save these instrucons for future use.
3 Unplug from the wall socket before cleaning.
4 Do not use near water.
5 Do not place on a stand or table; it may fall causing injury to a child or adult, and damage to the unit.
6 The unit should only be operated from the power source indicated on the panel of the amplifier.
7 Only use the power cord supplied.
8 Do not allow anything to rest on the power cord. Posion the power cord such that it cannot be walked on.
9 For added protecon during a lightning storm, or when not in use for long periods of me, unplug it
from the wall socket.
10 Never spill any kind of liquid on the unit.
11 Do not aempt to service the unit yourself, as removing the amplifier may expose you to dangerous
voltages. Refer all servicing to your dealer.
12 Unplug the unit from the wall socket and refer servicing to your dealer under the following condions:
a When the power cord or plug is damaged.
b If liquid has been spilled onto the unit.
c If the unit does not operate properly by following the operang instrucons.
d If the unit has been dropped and damaged.
e When the unit exhibits a drasc change in performance.
Warning
This item is heavy. To avoid risk of injury, take care when handling.
Design Safety
This apparatus is supplied with a detachable mains cord. For 230V operaon a 1.6A/T5, 2A/T7, 3.15A/T9
fuse is fied in the socket. For 115V operaon a 3.15A/T5, 4A/T7, 6.3A/T9 fuse is fied. Should the fuse
need to be replaced use a similar rated fuse approved to ASTA or BSI 362 standards. Do not use without the
fuse cover in place. Replacement fuse covers are available from your distributor.
Important Safeguards
2
Thank you for buying a REL Serie T Sub-Bass System. The Serie T is the result of a state-of-the-art collaboraon
between our American design and engineering team and our Brish producon team.
Serie T is conceived as the most cost effecve high end product we know how to build. We have spared
none of the materials and finishing techniques our larger designs are noted for. Many compeng products
are clearly the result of cost engineering, however, Serie T is a pure high end product in design and execuon.
If, like many, you are surprised and delighted by the quality and “suddenness” of bass as rendered by Serie T,
know that this is the result of a careful, painstaking iterave process of the sort that so rarely makes it into
producon at anything like these prices.
Many of the sonic virtues – speed, warmth and slam – embodied in Serie T are the direct result of
mechanical and acousc advancements. In parcular, we have ulized damping and resonance control
approaches more familiar to fine acousc instrument manufacturers incorporang bracing that is highly
unusual in this applicaon. The bracing is carefully wedged into shallow channels in the side and top wall
material which beer couples the energy control of these panels. Addionally, the aluminium feet are
milled from solid billet and weigh an incredible amount. We thoroughly tested and were able to clearly
discern the benefit of having a solid, high mass exit path for deleterious vibraon; vibraon that would
otherwise slow and blur the clarity of bass lines. Make a structure inert and quieter and more of the
music emerges.
A brief word about the styling, fit, and finish. Each Serie T receives nine coats of lacquer, all of which require
hand sanding. The final coat is then turned by hand on a large, industrial rouging wheel using jewelry buffing
compound. Finally, the deep, wet gloss is achieved by hand polishing using micro fibre cloth and expensive
aermarket waxes. All exposed bolts used to aach the rear panel to the Serie T cabinet are polished T-304
stainless steel allen head designs. This extra cost is undergone to ensure that even in humid markets RELs
will not oxidize or degrade in appearance. Each badge is milled from solid billet aluminium and is a full
2.5mm thick even though we choose to only reveal 1mm above the surface of the cabinet. Much like the
underlying quality of all RELs, more lies beneath the surface than is evident to the eye.
Welcome to the REL Family

Specyfikacje produktu

Marka: Rel
Kategoria: głośnik
Model: T serie

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rel T serie, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Rel

Rel

Rel Storm III Instrukcja

5 Października 2024
Rel

Rel stentor iii Instrukcja

25 Września 2024
Rel

Rel Storm 5 Instrukcja

14 Września 2024
Rel

Rel T serie Instrukcja

26 Sierpnia 2024
Rel

Rel R-305 Instrukcja

9 Sierpnia 2024
Rel

Rel R-505 Instrukcja

3 Lipca 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024