Instrukcja obsługi Rel Stentor II

Rel głośnik Stentor II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rel Stentor II (11 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
REL
Operating Instructions
STENTOR
Sub-Bass System
REL Acoustics Ltd,
North Road, Bridgend Industrial Estate,
Bridgend, Mid-Glamorgan, CF31 3TP.
Telephone: 01656 768777; International : +44 1656 768777
Fax : 01656 766093; International ; +44 1656 766093
2
WELCOME
Thank you for buying the REL STENTOR Sub Bass system.
STENTOR has been carefully hand crafted from the finest materials
available and we are sure that it will give you many years of
listening pleasure. This manual contains important safety
information as well as helpful advice and should be carefully studied
before connecting up.
WARRANTY
At REL we believe in an easy to understand Warranty. STENTOR
is covered by a 2 year Warranty (UK Mainland only) which covers
both parts and labour. Damage caused by either physical or
electrical abuse is NOT covered by this Warranty. Overseas buyers
should check with their local Dealer/Distributer for the Warranty
cover provided.
Should the STENTOR unit give you a problem, please contact your
Dealer who will be able to make whatever arrangements are
necessary to correct it.
SERVICE AFTER WARRANTY
Please contact your Dealer in the first instance before returning any
product direct to us. Should the unit need to be returned for any
reason, all carriage costs will be payable by the Customer. Losses
or damage caused during transit are the Customer’s risk.
3
CONNECTING UP
Always switch off your system before disconnecting any wires.
To increase the versatility of the choice of connecting up, Stentor includes a set of
three gold plated 4mm connectors. These will accept large diameter speaker
cables and will allow you to join the Stentor signal cable with your existing speaker
cables, if desired.
The identification of the signal interconnect cable colour coding is as follows:-
Red wire to RED banded plug
Yellow wire to RED banded plug
Black wire to BLACK banded plug
STENTOR has two independent XLR sockets. This is to facilitate use with both
professional and domestic equipment. The 600 Ohm balanced line input is the
one intended for professional use. It also has a much higher sensitivity.
Alternatively, it can be used with domestic equipment where there is either a
dedicated low bass (sub-woofer) output on the amplifier or a separate line level
output on the preamp. In these cases it is normally used unbalanced, i.e. only one
of the input arms is used.
The other XLR input is intended for use with domestic equipment where the output
is taken from the power amplifier’s speaker outputs. This does have the advantage
of ensuring that STENTOR receives exactly the same signal as the main speakers.
This ensures that the character of the bass from the main system is carried
forward into the sub-bass . This is a very important point and together with the
STENTOR’s Active Bass Controller (ABC) ensures far superior system integration
of the sub-bass with the main system.
Screw the spikes into the feet of the sub-woofer, level them up or if necessary
compensate for an uneven floor. It is important that all 4 spikes are located
securely and that there is no tendency for STENTOR to rock. If it does rock, simply
adjust one (or more) of the spikes until it fits securely.

Specyfikacje produktu

Marka: Rel
Kategoria: głośnik
Model: Stentor II

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rel Stentor II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Rel

Rel

Rel Storm III Instrukcja

5 Października 2024
Rel

Rel stentor iii Instrukcja

25 Września 2024
Rel

Rel Storm 5 Instrukcja

14 Września 2024
Rel

Rel Strata 5 Instrukcja

8 Września 2024
Rel

Rel Stampede Instrukcja

7 Września 2024
Rel

Rel Strata II Instrukcja

5 Września 2024
Rel

Rel R Serie Instrukcja

4 Września 2024
Rel

Rel Gibraltar Instrukcja

1 Września 2024
Rel

Rel Strata III Instrukcja

31 Sierpnia 2024
Rel

Rel Studio III Instrukcja

30 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025