Instrukcja obsługi Ram Audio SB 3K
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ram Audio SB 3K (7 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
RAM_OCS v3 Quick Guide
INSTALLATION AND FIRST STEPS
Welcome to RAM OCS, the Online Control System for RAM Audio V/W Series DSP amplifiers. By using it you can control
and monitor the DSP unit of a V/W amplifier through an Ethernet network or a USB connection, in a Windows system.
To start, install the software in a Windows system (XP, Vista, 7, 8 or 10) and connect the amplifiers to the Ethernet network or
the USB port. Each amplifier is programmed from factory with a unique IP number inside the range 192.168.xxx.xxx. To de-
tect initially the amplifiers you have to work inside this range. Change the computer IP to 192.168.0.10 for example, and use
a mask 255.255.0.0. After detect the amplifiers inside this range you can change the IP of each one if required.
Execute the RAM OCS software using the Shortcut created in the desktop and start scanning the network. To do that, click in
the loupe (1) icon placed near to the left top side of the window. The system has to detect all amplifiers you have connected
in your network or connected using the USB port. To open an amplifier you have to do a double click on the amplifier showed
in the devices tree (2).
Create a virtual amplifier: if you do not have any amplifier connected to the system, you can add an offline amplifier clicking
with the right mouse button on the “Amplifiers” section of the devices tree (3), and selecting the Add device option.
To obtain some help for the different button functions, you can maintain the cursor over a button for two seconds to show a
hint which can help you.
The elements of the main screen are as follows:
Project Menu Tab Amp Menu Tab
Devices Tree:
show a list of all
amplifiers detected
in your Ethernet
network or USB
connection
Amp Information:
show the model,
serial number,
name, IP address
and firmware ver-
sion of the selec-
ted amplifier
Amps Scan - Tree
management icons
Poject/Amp Menu
Icons
Frequency response graphic window
Amplifier configuration main window
3
2
1
MAIN MENU DESCRIPTION
- Project Menu icons:
It contains different sections:
File section: contains different icons for manage your project, to open or save the structure of an amplifier group. Also you
can create a new empty project.
Settings section: contains the following icons:
- : pressing this icon you can change the name or the IP of an amplifier. Also you can send a buzz to a spe-Ethernet devices
cific amplifier to do a blinking of the back panel LEDs to help you to identify an amplifier.
- : permits to change different software parameters, as can be the dB scale of the response window, humidityPreferences
and temperature taken in account to calculate the speed of sound, wrapped or unwrapped phase representation, or write a
resume of the current project. Also, contains a button for firmware update.
View section: contains the following icons:
- : shows the graphical window with the frequency response of your current DSP configuration.Show Frequency Response
- : turn on/off the monitor mode which permits to read the real time data of the current amplifier. You can see itMonitor Online
in the Gain or Amp Setup tabs
- Amplifier Menu icons:
It contains different sections:
File section: contains different icons where you can manage your Library, to open or save the current PC Library. Also you
can create a new empty Library.
Communications section: using the icons you can send or receive the current library to/from the amp. These icons are the
same you have in the Sync Library section of the Library Tab. Also you can send to the amp a new DSP firmware to upgrade
it in the future.
View section: contains the following icons:
- : shows the graphical window with the frequency response of your current DSP configuration.Show Frequency Response
- : turn on/off the monitor mode which permits to read the real time data of the current amplifier. You can see itMonitor Online
in the Gain or Amp Setup tabs.
- : turn on/off the real time mode, so any change you make in the DSP configuration or the amplifierReal Time Operation
setup is replayed instantaneously. When you enable this option, it will synchronize the amp and the PC configuration, sen-
ding the current configuration you have in the PC to the amplifier.
Specyfikacje produktu
Marka: | Ram Audio |
Kategoria: | odbiornik |
Model: | SB 3K |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ram Audio SB 3K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Ram Audio
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
Instrukcje odbiornik
- odbiornik Yamaha
- odbiornik Pioneer
- odbiornik Plantronics
- odbiornik Technics
- odbiornik Onkyo
- odbiornik Edision
- odbiornik Bose
- odbiornik Zgemma
- odbiornik StarTech.com
- odbiornik Crestron
- odbiornik Behringer
- odbiornik Medion
- odbiornik Tangent
- odbiornik Boss
- odbiornik Peiying
- odbiornik Jensen
- odbiornik Blaupunkt
- odbiornik Metra
- odbiornik Line 6
- odbiornik Manhattan
- odbiornik Strong
- odbiornik Denon
- odbiornik Block
- odbiornik Phoenix Gold
- odbiornik Audac
- odbiornik Kenwood
- odbiornik NuPrime
- odbiornik Alpine
- odbiornik Focusrite
- odbiornik Auna
- odbiornik Vimar
- odbiornik Renkforce
- odbiornik Audiotec Fischer
- odbiornik Pro-Ject
- odbiornik Pyle
- odbiornik Marantz
- odbiornik Sennheiser
- odbiornik Chord
- odbiornik Fosi Audio
- odbiornik Musical Fidelity
- odbiornik Peavey
- odbiornik ART
- odbiornik NAD
- odbiornik Harman Kardon
- odbiornik Aiwa
- odbiornik JL Audio
- odbiornik AKAI
- odbiornik ICOM
- odbiornik Sunfire
- odbiornik Hifonics
- odbiornik Focal
- odbiornik DBX
- odbiornik Omnitronic
- odbiornik Hama
- odbiornik McIntosh
- odbiornik FSR
- odbiornik Ground Zero
- odbiornik Power Dynamics
- odbiornik Rockford Fosgate
- odbiornik Monacor
- odbiornik KanexPro
- odbiornik Kopul
- odbiornik BZBGear
- odbiornik Rupert Neve Designs
- odbiornik Key Digital
- odbiornik Whirlwind
- odbiornik Music Hall
- odbiornik Apantac
- odbiornik Sonance
- odbiornik Rotel
- odbiornik Devialet
Najnowsze instrukcje dla odbiornik
10 Lipca 2024
8 Lipca 2024
7 Lipca 2024
30 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024