Instrukcja obsługi Radial Engineering SW8 MK2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Radial Engineering SW8 MK2 (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
www.radialeng.com
SW8 MK2
Eight Channel Auto-Switcher
User Guide
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam BC V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com • web: www.radialeng.com
www.radialeng.com
True to the Music
Part No. R800 8100 00
Table of Contents Page
SW8 Overview .........................................................1
Features and Functions ...........................................2
Getting Started ........................................................3
Making Connections ................................................4
Remote Switching....................................................5
Auto-Switching.........................................................6
Linking SW8 Units Together ....................................7
Recon guring XLR Outputs .....................................8
Grounding Options ..................................................8
Signal Flow Block Diagram......................................9
Speci cations ..........................................................9
Warranty .................................................Back Cover
SW8 MK2 Auto-Switcher User Guide
Combination Eight Channel Auto Switcher &
Transformer Isolated Direct Box
INTRODUCTION
Congratulations on your purchase of a Radial SW8™ Auto-Switcher. The SW8 is designed to provide
redundant backup for a multi-track playback system and is equally functional as part of a safety backup
system to switch announcements or other messaging. This manual covers the setup and operation of
the SW8 in a typical concert setting. Please take a few minutes to read through this manual in order to
familiarize yourself with the many innovative features incorporated into the SW8. Inside you will nd
important safety features along with tips on how to get the most out of your SW8.
Should you have any questions on an application not covered in this manual, we invite you to log onto
the Radial web site at radialeng.com to check the SW8’s FAQ section for the latest updates. This is also
where we post questions from users. If after this you still do not nd what you are looking for, feel free to
send us an email at info@radialeng.com and we will do our best to reply in short order.
Now get ready to seamlessly switch backing tracks with total con dence!
PERFORMANCE DISCLAIMER
The Radial SW8 is an electronic device designed to provide the means to backup other electronic
devices. However, like all electronics, the SW8 itself is not totally immune to malfunction.
Because the SW8 is designed to integrate with other devices to form a complete system, a
critical malfunction may not be obvious until the system is asked to perform. This makes it very
important to test your complete playback system before each performance to ensure your system
is working as expected.
Radial Engineering Ltd. will not be held liable for any consequential or inconsequential costs
or damages associated with the use of the SW8. It is understood that connecting, testing and
operating the SW8, along with the application or misapplication, is the sole responsibility of the
end user. For more details refer to the Radial limited warranty.
!
Radial Engineering Ltd. SW8 MK2 User Guide
1
OVERVIEW
The Radial SW8 is an eight channel redundant switcher designed primarily for live concerts where backing tracks are used to reinforce
the performance. Should the primary playback machine suffer a failure, the SW8 can switch to a backup machine either automatically,
manually, or by remote control.
The SW8 lets you select between two groups of eight audio inputs and route either group to eight discrete outputs. Input connections are
made with your choice of standard eight channel 25-pin D-Sub connectors or individual ¼TRS phone jacks for easy interface with a variety
of audio playback systems. Choice of outputs include an eight channel balanced line-level 25-pin D-Sub or eight transformer isolated mic-
level XLR outputs. Most system techs employ the D-Sub output to feed their personal payback system for monitoring and use the front
panel XLR outputs to connect to the mic splitter and snake system for the PA.
PRIMARY-A
MULTI-TRACK
BACKUP-B
MULTI-TRACK
PLAYBACK SYSTEM
CONTROL
SOUND REINFORCEMENT
SYSTEM
8-CH AUTO
BACK-UP
SWITCHER
PIN-1
LIFT
PIN-1
LIFT
PIN-1
LIFT
PIN-1
LIFT
PIN-1
LIFT
PIN-1
LIFT
PIN-1
LIFT
PIN-1
PAD AUTO
THRESHOLD
INPUT SELECT
BA
ALARM
TONE
CONTROL MONITOR
GLOBAL ON
STANDBY
BA
®
MUTE
TONE
BELOW
THRESHOLD
The SW8 can operate in three modes; manual, remote and auto-switch. Depending on your personal preference, experience and con dence
with your setup, you will likely choose one of these approaches and stick with it. Some techs prefer a hands-on approach where they run
two computers completely separately so that should one fail, the other is autonomous. They will typically start both laptops at the same time
and then manually switch between them if a problem is encountered. Others prefer to automate the process whereby they will lock both
devices together with time code. Should the master playback system fail the SW8 will automatically switch to the backup.
Manual switching is accomplished using the front panel AB select switch. In situations where the SW8 may be remotely stationed, a remote
switch may be connected. This can be done using a simple latching footswitch such as the type used on a guitar amp to change channels
or turn on a reverb, or by using the optional Radial JR2 remote. This dual-function footswitch gives you control over AB select and standby
functions along with LED status indicators. When set to auto-switch mode, the SW8 can detect a machine malfunction and switch to a
backup player to ensure a seamless performance. You merely record a 1kHz tone onto the primary recorder (drone track) and send the
signal into the SW8’s auto-switch gate input on the rear panel. As soon as the drone track disappears, the SW8 diverts the inputs to the
backup system. For larger playback system requirements, several SW8 units may be linked together to create 16, 24 or 32 track systems.
You simply designate the rst SW8 as a master unit and link as many slaves as you like using the JR2 link jacks.
The Radial SW8 has gained international notoriety as is used on stage every day with artists as diverse as U2, Lady Gaga, The Eagles,
Radiohead and Cirque Du Soleil.


Specyfikacje produktu

Marka: Radial Engineering
Kategoria: Niesklasyfikowane
Model: SW8 MK2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Radial Engineering SW8 MK2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Radial Engineering

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024