Instrukcja obsługi Radial Engineering LX8


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Radial Engineering LX8 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
www.radialeng.com
LX8
User Guide
Eight Channel • Transformer Isolated • Line Splitter
Specications and appearance are subject to change without notice.
© Copyright 2021, all rights reserved.
Radial Engineering Ltd.
1845 Kingsway Ave, Port Coquitlam BC V3C 0H3
Tel: 604-942-1001 • www.radialeng.com
Email: info@radialeng.com
www.radialeng.com
True to the Music
True to the Music
Radial Engineering Ltd. LX8 User Guide
Table of Contents Page
LX8 Introduction ..............................................................1
Signal Flow ......................................................................2
Features ..........................................................................3
Connecting the LX8 .........................................................4
Applications .....................................................................5
Internal Chassis Ground Lift ............................................ 5
Warranty .................................................................... Back
1
LX8
User Guide
Eight Channel • Transformer Isolated • Line Splitter
INTRODUCTION
Congratulations on your purchase of a the Radial LX8 line splitter. We recommend that you take a few minutes to read through this
manual in order to familiarize yourself with the many innovative features that are built in.
Should you have questions or applications not covered in this manual, we invite you to log onto the Radial web site at www.radialeng.com
to check the FAQ section for the latest updates. Of course, you can also send us an email at support@radialeng.com.
LX8 DESIGN CONCEPT
The Radial LX8 is an eight channel, balanced line splitter in a compact 1RU package that divides the signals three ways; to a direct
output; a direct output with ground lift; and an isolated output. A high performance Jensen™ bridging transformer is used on the iso-
lated output to eliminate hum and buzz caused by ground loops.
Splitting line level signals is a straight forward concept. It’s most common in sound reinforcement when a single set of outputs needs
to be fed to two separate destinations simultaneously. When done improperly, splitting a signal can dull frequency response, lower the
output and worst of all, cause ground loops that produce buzz and hum. To avoid these pitfalls, sound reinforcement companies have
been building custom “splitter-snakes” for many years.
The LX8 is an off-the-shelf splitter for the rest of us allowing virtually anyone to design and assemble a splitter-snake with plug-n-play
simplicity and professional audio quality without the need for custom metal work or complex soldering.


Specyfikacje produktu

Marka: Radial Engineering
Kategoria: Niesklasyfikowane
Model: LX8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Radial Engineering LX8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Radial Engineering

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane