Instrukcja obsługi Quoizel Purcell PCPU8632C

Quoizel Ulga Purcell PCPU8632C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Quoizel Purcell PCPU8632C (2 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Package Contents
1of2
For Style PCPU8632C
Please go to for product cleaning tips. Go to the selection.
(4) G9 Clear Xenon Bulbs 40W Maximum, bulbs not included.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
www.quoizel.com Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Fixture Body
x 1
E
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Installation Guide #IS-PCPU8632C
2019 QuoizelInc. ReleasedDate:2019-01-22
visit us on-line at www.quoizel.com
Mounting Screw
x 4
B
Glass Shade
x 4
D
(Step 2 Continued)
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 3
STEP 3 -Install the Fixture Body
A. Place the backplate of the Fixture Body (D) onto the Inner
Backplate (A) and secure with Mounting Screws (B). Tighten until
snug with screwdrivers.
Backplate
B
D
A
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Do not touch the bulb with bare hands use a cloth or glove.
Side Rod
x 12
C
FCrystal
x 4 bags
AInner Backplate
x 1
G
G
G
GG
N
N
N
NN
D
D
D
DD
Figure 1
STEP 1 -Install the Inner Backplate to the outlet box
A. Place the supply wires and ground wire through the Inner
Backplate (A). Attach the Inner Backplate (A) to the outlet box with
the head of the green ground screw facing you. Secure it with
outlet box screws (not included). Tighten until snug with
screwdrivers.
Outlet Box Outlet Box Screw
(not included)
Supply Wires
with Ground Wire
A
Green Ground Screw
G
G
G
GG
N
N
N
NN
D
D
D
DD
2of2
2019 QuoizelInc. ReleasedDate:2019-01-22
visit us on-line at www.quoizel.com
PCPU8632C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible materials.
4.75”
7
4” Dia.
5.75" 4.75"
2.5
6
Figure 4
STEP 4 -Install Bulb, Glass Shade and Crystals
A. Insert bulbs onto sockets and push snugly into
properly.
B. Place the Glass Shade (E) over the sockets and
align holes on the Glass Shade (E) to mounting
holes on the glass holder. Secure by threading
Side Rods (C) onto mounting holes on the glass
holders. Hand tighten until snug.
C. Place one bag of Crystals (F) in each Glass
Shade (E).
Your fixture is now assembled and ready to use.
Enjoy!
Socket
G9 Clear Xenon Bulb
(not included)
CE
F
Glass Holder
G
G
G
GG
N
N
N
NN
D
D
D
DD
32


Specyfikacje produktu

Marka: Quoizel
Kategoria: Ulga
Model: Purcell PCPU8632C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Quoizel Purcell PCPU8632C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ulga Quoizel

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024