Instrukcja obsługi QTX Tri-Bar

QTX Ulga Tri-Bar

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX Tri-Bar (4 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

www.avsl.com 151. 3UK User Manual 59

Tri-Bar

3 Segment RGB LED Wall Bar

Item ref: 151.593UK

User Manual

Thank you for choosing the QTX -Bar with 18 high output RGB LEDs to provide colour washes and Tri

moving patterns against walls, ceilings or even floors. The 3 groups of 6 LEDs can be controlled by auto or

sound activated modes from preset internal colour sequences. Alternatively, the bar can be operated

remotely by DMX in either 3, 7 or 13 channel modes and connected to more units if a larger effect is

needed.

In the box:

Your -Bar s ld arrive with you in a single carton in good condition. T carton should contain Tri hou he

1 x main uni 2 fixing stand/brackets with thumbscrews, 1 x UK IEC mains lead and 1 x manual. t,

Warning:

To prevent risk of fire or electric shock, do not expo the unit to rain or damp environments. In the event se

of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo

check the unit before continuing use.

Please read rough this manual thoroughly before use, any dama th ge

cause by misuse of product will not be covered by warrantd y.

Please do not open cover, contains high voltage. This

product is not serviceable or repairable by the end user.

Please refer to qualified personnel for service and repair.

www.avsl.com 151.593UK User Manual

Placement:

• Use the included mounting brackets to fix a stand or lighting truss. to

• Use secondary safety fixings if mounting overhead.

• Keep away from damp or dusty environments.

• Ensure adequate airflow around the fixture housings.

• Ensure ade ate access to controls and connections. qu

• Do not aim LED or laser output directly into line of sight, as this can result in eye injury.

Cleaning:

• Use a soft cloth with a neutral detergent to clean the casing as required.

• Do not use strong solvents for cleaning the unit.

Side panel controls:

Manual control menu:

P ss the re “ ” buttoMENU n to enter the settings menu.

Press “ ” and “UP DOWN” buttons to navigate through various setting functions .

P button confirm the desired setting. ress “ENTER” to

Function

Description

d 001

d - d 001 512

DMX address settings

CH3/CH7/CH13

DMX channel selection

Au00 - 16 Au

Automatic modes

FL00 - FL09

Automatic mode strobe slow to fast –

SP00 - SP09

Automatic mode speed slow to fast–

So01 - So02

Sound activated modes

Sn01 - 9 Sn0

Sound activated mode sensitivity adjustment low to high –

DMX mode:

The -Bar can be controll by DMX signal, simply connect the DMX signal source the DMX input on Tri ed to

the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signa by looping vi a l

through the DMX out To enter DMX mode, select d001 from the menu and co m the correct on the unit. nfir

start address and channel selection using the and by “ ”UP “ ”DOWN buttons and The d on “ ”ENTER . “ ”

the LED display will begin to flash once it s received the DMX signal from th’e controller. This unit has 3, 7

or 13 DMX channels as indicated in the table below:

www.avsl.com 151.593UK User Manual

3 Channel mode:

Channel

Value

Function and description

0 255-

Red dimmer (0- 100%)

0 255-

Green dimmer (0- 100%)

0 55- 2

Blue dimmer (0- 100%)

7 Channel mode:

Channel

Value

Function and description

0 255-

Master dimmer (0- 100%)

0 255-

Red dimmer (0- 100%)

0 255-

Green dimmer (0- 100%)

0 55- 2

Blue dimmer (0- 100%)

0 255-

Strobe (slow to fast)

0 009-

Manual dimming

10 249-

Integrated effec ts

250 255-

Sound to light

0 255-

Speed adjust (slow to fast)

13 Channel mode:

Channel

Value

Function and description

0 255-

Segment 1 red dimmer (0- 100%)

0 255-

Segment 1 blue dimmer (0- 100%)

0 255-

Segment 1 green dimmer (0- 100%)

0 255-

Segment 2 red dimmer (0- 100%)

0 255-

Segment 2 blue dimmer (0- 100%)

0 255-

Segment 2 green dimmer (0- 100%)

0 255-

Segment 3 red dimmer (0- 100%)

0 255-

Segment 3 blue dimmer (0- 100%)

0 255-

Segment 3 green dimmer (0- 100%)

0 255-

No function

0 255-

Strobe (slow to fast)

0 009-

Manual dimming

10 249-

Integrated effec ts

250 255-

Sound to light

0 255-

Blue dimmer (0- 100%)

Specifications:

Power supply

110-240Vac, 50/60Hz (IEC)

Power consumption

60W

Fuse rating

F3A

LED type

18x 3W RGB 3- -1 COB in

Beam angle

45°

Modes

Static colour, colour change, colour fade, auto, sound active,

DMX, master/slave

DMX channels

3, 7 or 13

Dimensions

1150 x 60 x 60mm

Weight

1.850kg

Specyfikacje produktu

Marka:	QTX
Kategoria:	Ulga
Model:	Tri-Bar

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX Tri-Bar, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Ulga QTX

QTX DM-X12 Instrukcja

15 Października 2024

QTX HPWash100 Instrukcja

6 Października 2024

QTX Moonglow Instrukcja

6 Października 2024

QTX Recharge Performer Instrukcja

27 Września 2024

QTX Wash & Beam Instrukcja

27 Września 2024

QTX TetraCube Instrukcja

27 Września 2024

QTX BATPAR-18W Instrukcja

27 Września 2024

QTX TinyMover Instrukcja

27 Września 2024

QTX Recharge DJ Instrukcja

27 Września 2024

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025

Gardena 4206 Instrukcja

15 Stycznia 2025

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025

Philips HF3304 Instrukcja

14 Stycznia 2025

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025

Livarno IAN 103915 Instrukcja

13 Stycznia 2025

ION Party Ball USB Instrukcja

13 Stycznia 2025

Livarno IAN 292038 Instrukcja

12 Stycznia 2025

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025