Instrukcja obsługi QTX TETRA

QTX Ulga TETRA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX TETRA (6 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
www.avsl.com 1.608 User Manual 15 UK
TETRA
4- -1 LIGHT EFFECT in
Item ref: 1.608 15 UK
User Manual
Version 2.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
www.avsl.com 1.608 User Manual 15 UK
Introduction
Thank you for your purchase of e QTX light effect. This model can deliver an extra wide array of th TETRA
colourful projections coupled with powerful UV/strobe and laser effects. Please read and keep this user
manual to get the best from your purchase and avoid damage through misu se
Warning
To prevent the risk of fire or electric shock, avoid contact with moisture or humid environment s.
No user serviceable parts insid Do n open the case refer all servicing to qualified service personnel. e –ot –
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to operate in
accordance within the guidance given by the Health and Safety Executive (HSE) in
HS(G)95: “The Radiation Safety of Lasers used for Display purposes”. Copies of this
guide can be downloaded from: www.avsl.com/assets/documents/hsg95.pdf
Safety
Check for correct mains voltage and condition of power lead before connecting to power outlet. a
Placem t en
• Use the included mounting bracket to fix to a stand or lighting truss
• Use secondary safety fixings if mounting overhead.
• Ensure adequate airflow around the fixture housings
• Ensure adequate access to controls and connections
Cleaning
• Use a soft cloth with a neutral d ergent to clean the casing as required et
• Do not use strong solvents for cleaning the unit
In the box
Please open the package carefully and check that all contents are pres t and in good condition. en
Contact your retailer if any part is missing or broken.
• TETRA LED & laser light effect
• I.R. remote control
• Mounting bracket
• Laser keys (x2)
• UK mains plug to C lead IE
Please do not open cover, contains high voltage. This product is
not serviceable or repairable by the end user. Please refer to
qualified personnel for service and repair.
www.avsl.com 1.608 User Manual 15 UK
Rear panel
Installation
Install the TETRA free standing on a stable surface or suspen from a lighting stand or truss. ded
When mounting to a stand or truss, use the included adjustable fixing bracket and ensure that a safety wire is
used if mounting overhead.
If the TETRA is to be operated by DMX control, connect the DMX control signal to th DMX IN connector using e
a XLR lead and connect further DMX fixtures being controlled from the DMX OUT connector. n
Connect mains power to the TETRA using the supplied IEC lead or equivalent, ensuing the supply voltage is
correct and capable of the load demand.
Remote control
The TETRA is supplied wit an infra-red remote control for quick operation. h
This is powered by a CR2025 button cell, which should be engaged by pulling out the plastic tab.
Point the remote towards the front of the TETRA housing, where the I.R. receiver is located.
The remote controls are explained in the diagram below
Laser Key
OFF
ON

Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: TETRA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX TETRA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Recharge Performer Instrukcja

27 Września 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025
Gardena

Gardena 4206 Instrukcja

15 Stycznia 2025
Nedis

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025
Philips

Philips HF3304 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025
Livarno

Livarno IAN 103915 Instrukcja

13 Stycznia 2025
ION

ION Party Ball USB Instrukcja

13 Stycznia 2025
Livarno

Livarno IAN 292038 Instrukcja

12 Stycznia 2025
Eurolite

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025