Instrukcja obsługi QTX Starscape

QTX Ulga Starscape

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX Starscape (6 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Starscape
Item ref: 152.740UK
Starscape Multi-Colour Laser Effect
User Manual
IMPORTANT SAFETY NOTICE
Please Read this manual before operating
VERSION 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Powered by TCPDF (www.tcpdf.org)
152.740UK User Manual
Introduction
Thank you for choosing this product. Please read this manual carefully to
achieve the best results from your purchase and to avoid damage through
misuse. This laser has been designed to create multiple laser effects and
patterns across a wide area. Please keep this manual for future reference.
CAUTION
This Class 3B laser product emits hazardous levels of
optical radiation and will cause injury to the eyes if viewed
directly.
This product is not suitable for projection directly at
audiences or other personnel.
This product must not be used for any form of audience
scanning application and is for professional use only.
Important information
This product is a Class 3B laser and should only be installed and used by
personal who are trained in the management of laser radiation and are
able to operate in accordance within the guidance given by the Health and
Safety Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used
for Display purposes”.
Copies of this guide can be downloaded from the HSE website:
www.hse.gov.uk/pubns/priced/hsg95.pdf
This product contains no user-serviceable parts. Under no circumstances
should any attempt be made by the user to modify it in any way.
152.740UK User Manual
Technical Specification
1. Voltage: 100-250Vac, 50/60Hz (IEC)
2. Rated Power: 10W
3. Green Laser: 50mW @515nm Wavelength
4. Red Laser: 80mW @638nm Wavelength
5. Blue Laser: 100mW @450nm Wavelength
6. Working Modes: DMX, Sound-Active, AUTO, Master-Slave.
7. DMX Control Channel: 5 Channels
8. Size: 190 x 145 x 85mm
9. Weight: 1.2Kg
Function & Setting
Sound-Activated Mode
When setting up sound activated mode please select on the LED
display on the back of the unit. Scroll through the menu to find and
press enter to make live. The patterns will change in accordance with the
sound. If there is no sound detected from the microphone, then the laser
will have no output.
AUTO Mode
When this setting is live the laser will change patterns automatically and
go through different cycles with no external control. The laser will not
black out when in this mode.
DMX Control
When controlling lasers via DMX set up the controller through the input
socket. DMX can control the system mode, the laser pattern, the size, the
position, the speed, etc.
For more information please see the Control Parameter Chart.


Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: Starscape

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX Starscape, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga