Instrukcja obsługi QTX QR5W

QTX głośnik QR5W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX QR5W (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
QR5A
5.25” ACTIVE STEREO SPEAKER SET
Item ref: 178.200UK, 178.201UK
User Manual
Version 2.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
178.200UK, 178.201UK User Manual
Introduction
Thank you for choosing the 5 active speaker set. Please read this manual prior to use to avoid damage to QR
the item. These compact, self-contained stereo speaker sets are designed to deliver high quality near-field or
perimeter coverage for various monitoring and installed sound applications.
Contents
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components:
• QR5 active speaker with built-in amplifier
• QR5 passive satellite speaker
• 2 x wall-mounting brackets with screw caps
• Satellite speaker wire
Safety Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent electric shock do not remove the rear cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
• Prior to connecting to the mains, ensure that the supply voltage is correct.
• Avoid ingress of water or particles into the enclosure.
Placement
• Keep the unit out of direct sunlight and away from heat sources.
• Keep the unit away from moisture or dusty environments.
• Allow adequate space for cooling at the rear of the active speaker unit
Cleani ng
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. Do not use solvents.
178.200UK, 178.201UK User Manual
Panel layout
Setting up
For near-field or desktop use, space speakers apart for adequate stereo separation depending on
proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets
to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take
care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach.
Fix the speaker units to the brackets at top and bottom using the supplied screw caps. Each can be
rotated to aim the general direction of sound output.
If the speakers are mounted at height or where falling objects may be hazardous, it is advised to
attach a secondary means of support (e.g. drop-wire or chain)
Operation
Link the satellite speaker to the spring terminals on the powered speaker (5) using the supplied
speaker lead (connecting red to red and black to black)
With the rotary VOLUME (3) control set to minimum and TREBLE and BASS controls (1, 2) set to the
vertical (12 o’clock) position, connect the attached mains lead (7) to a suitable mains outlet. Connect
the source signal into the active unit via the L+R RCA connectors (4 Switch the power on (6) and ).
gradually turn the rotary VOLUME control clockwise and increase volume level to the required
amount.
Adjust TREBLE (2) and BASS (1) controls to provide the desired tonal response.
The centre position is unaffected, to the left is cut and to the right is boost.
Turn down the rotary VOLUME control before switching off.
1
TREBLE EQ control
2
BASS EQ control
3
VOLUME control
4
Signal input (L+R RCA)
5
Satellite speaker connection (spring terminals)
6
Power on/off switch
7
Mains power lead
8
Mains fuse holder

Specyfikacje produktu

Marka: QTX
Kategoria: głośnik
Model: QR5W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX QR5W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik QTX

QTX

QTX PAL15 Instrukcja

10 Października 2024
QTX

QTX PAL8 Instrukcja

2 Października 2024
QTX

QTX 178.843 Instrukcja

24 Września 2024
QTX

QTX QUEST-12A Instrukcja

23 Września 2024
QTX

QTX QUEST-10A Instrukcja

22 Września 2024
QTX

QTX QS15A Instrukcja

10 Września 2024
QTX

QTX QR15PABT Instrukcja

8 Września 2024
QTX

QTX 178.201 Instrukcja

8 Września 2024
QTX

QTX PartyPod Instrukcja

2 Września 2024
QTX

QTX QR12K Instrukcja

29 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025