Instrukcja obsługi QTX QR10PABT

QTX głośnik QR10PABT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX QR10PABT (5 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
QR8 BT, QR10PA PA BT
Portable PA
Item ref: 178.8 , 178.839UK 38UK
User Manual
Version 1.2
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
178.8 , 178.839UK User Manual 38UK
Introduction
Thank you for choosing the QRPABT portable PA unit. Please read this manual prior to use to avoid damage to the item.
This versatile portable PA unit is pa d with features in a compact, manageable enclosure and is suitable for a wide cke
array of applications ranging from public address for presentations to outdoor karaoke.
• 15Vdc power adapter with IEC input
• Internal 12V rechargeable battery
• VHF handheld microphone included
• Guitar / Microphone inputs (6.3mm jack)
• Master 2 band EQ and Echo effect for microphones
• Internal USB/SD/FM/BT media player with record function
• Bluetooth pairing with TWS function
• VCV mic override function
• I.R. remote control for media player
• Integral 35mm pole mount
• AUX line input
Please check the contents to ensure that the product has been received in good condition.
• QRPABT portable PA unit
• VHF microphone
• 15Vdc power adaptor and IEC mains lead
• IR Remote control for media player
• User manual
If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible
replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do
not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
Prior to connectin the mains adapter, ensure that the supply voltage is correct and the mains lead is in good condition. g
Avoid ingress of water or particles into the enclosure.
If the internal fuse blows, refer the unit to qualified service personnel
If the VHF microphone transmitter is to be unused for a long period of time, remove the batteries and store for later use.
Placement
Keep the unit out of direct sunlight and away from heat sources.
Place the unit in an upright position during use and storage.
Keep the unit away from moisture or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.
To avoid damage, do not use solvents to clean this equipment.
178.8 , 178.839UK User Manual 38UK
Control panel
Powering up
Your n QRPABT unit may arrive with you with the internal battery charged. Before connecting to the mains with the ew
supplied power adaptor, switch the it on and check the POWER LED (18). If it is green, there is charge in the battery. un
If it is red, then you will need to charge the battery before using away from a mains supply
Connect the QRPABT unit to the mains using the supplied power adaptor. You may otherwise opt to connect the DC input
jack (20) to an external 12- Vdc supply, such as a car battery, or use the internal battery if charged. 15
When not in use but connected to the mains, if the POWER switch (19) is in the
off
position, the internal battery will be
re-charged from the mains supply. This can be observed by the CHARGE LED (18), which will light orange when
charging. When fully charged, the CHARGE LED will change to green.
Note: it is recommended to store the PA unit at an ambient temperature and not with the battery fully discharged.
Initial setup
Turn all VOLUME & ECHO controls down (anti-clockwise) and turn the POWER itch on (the power LED should light). sw
BASS and TREBLE controls should remain pointing vertically (12-o-clock position). Turn up the main VOLUME control part
way and switch VCV off. Your QRPABT unit should now be ready to operate.
VHF Microphone
Ins t ther e supplied AA batteries into the handheld microphone by carefully unscrewing the base and connecting the “+”
and “ ” terminals o- f the battery to the corresponding contacts inside the microphone body, taking care to observe the
correct polarity.
Turn on the VHF receiver (16) and turn the VHF VOL control (6) up (clockwise) part way.
Switch on the wireless mic the rear panel RF LED should light as a result. If the LED on the transmitter lights dimly, –
change the battery. Gradually increase the VHF VOL control, testing the microphone for output through the speaker.
Take care not to incur “feedback” (howling or screeching sound through the speaker) by keeping the microphone a
sensible distance from the speaker and pointing away from the speaker so that it doesn’t
hear
the speaker output.
Turning the ECHO control (3) clockwise introduces a pre-set echo function for singing and special effects. BASS and
TREBLE ( , 5 can be cut by turning anti-clockwise or boosted by turning clockwise. 13 )
When not in use, switch the handheld transmitter off and remove the batteries if not being used for long periods.
1
USB port
2
SD/MMC card slot
3
ECHO level
4
Wired MIC / guitar volume
5
TREBLE EQ
6
VHF Mic volume
7
LINE IN 2 x RCA
8
Wired MIC.1 / guitar input 6.3mm jack
9
Wired MIC.2 input 6.3mm jack
10
Smart phone / aux input stereo 3.5mm jack
11
Media player LCD display & IR receiver
12
Media player mode & transport controls
13
BASS EQ
14
Main volume
15
VCV talkover on/off
16
VHF wireless receiver on/off
17
MIX OUT line output 2 x RCA
18
Battery charge & power LEDs
19
Power on/off
20
DC power input jack

Specyfikacje produktu

Marka: QTX
Kategoria: głośnik
Model: QR10PABT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX QR10PABT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik QTX

QTX

QTX PAL15 Instrukcja

10 Października 2024
QTX

QTX PAL8 Instrukcja

2 Października 2024
QTX

QTX 178.843 Instrukcja

24 Września 2024
QTX

QTX QUEST-12A Instrukcja

23 Września 2024
QTX

QTX QUEST-10A Instrukcja

22 Września 2024
QTX

QTX QS15A Instrukcja

10 Września 2024
QTX

QTX QR15PA Instrukcja

26 Sierpnia 2024
QTX

QTX QR10PABT Instrukcja

23 Sierpnia 2024
QTX

QTX DELTA-50 Instrukcja

6 Lipca 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024