Instrukcja obsługi QTX PB-7

QTX Ulga PB-7

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX PB-7 (8 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
www.avslgroup.com 151.558UK
PB-7
High Power Foldable PAR Bar
Item ref: 151.558 UK
User Manual
Thank you for choosing this QTX PB-7 PAR bar. A foldable PAR bar kit fantastic for mobile DJs
and performers who need their lighting to be quick to set up and easily transportable. This
PAR bar boasts 4 high power Cans, each fitted with 7 x 3W RGB LEDs. Smooth colour blending
can be achieved by controlling with the included foot controller or via DMX.
In the box:
Your PB-7 should arrive to you in two separate cartons in good condition.
Carton 1:
• PAR bar with 4 LED PAR Cans
• Foot controller
• Foam carry case
• 2 x IEC mains lead (UK and EU)
Carton 2:
• 35mmØ tripod stand
• Stand bag
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.
In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.
Qualified personnel should then check the unit before continuing use.
• Always check the correct voltage and the condition of the IEC lead before connecting to a
power outlet.
• Always ensure any DMX leads used are in good condition with no short connections or
damaged plugs.
Please read through this manual thoroughly before use, any damage cause by
misuse of product will not be covered by warranty.
Please do not open cover, contain high voltage. This
product is not serviceable or repairable by end user.
Please refer to qualified personnel for service and repair.
www.avslgroup.com 151.558UK
Setup:
Release the clasp that holds the top bar in the folded position and unfold to the open position
as pictured below. There are two clasps at the back of the unit that need to be locked to keep
the top bar in the open position.
The opened top bar can now be place on to the supplied tripod stand and adjust to desired ed
height. Each LED PAR Can pans and tilts to face different directions and angles.
Back panel:
1. LCD Display
2. Manual control buttons
3. DMX signal in (DMX male socket)
4. DMX signal out (DMX female plug)
5. Foot controller socket
6. Built in m ic
7. IEC socket
8. Earth connection screw
DO NOT REMOVE
www.avslgroup.com 151.558UK
Manual control menu:
Press the “menu” button to enter the setting menu.
P s. ress “up” and “down” to navigate through various setting option
P the desired setting. ress “enter” to enter
C s and confirm setting by pressing hoose set value by “up” and “down” button “enter”.
Display
Mode
Press ENTER for setting




DMX address



 


to




DMX channel mode



 


 


 


 


, , , 1 1or




Slave mode



 


 



= master, = slave 1, = slave 2




Auto mode



 


 to




Sound activation



 



= sound to light on, = sound to light off




Microphone
sensitivity




(0-100% gain)




Blackout mode



 



= on, = blackout




LED display dimmer



 



= display off after 20s = constant display




LED display inverted



 



/ (normal or inverted display)




Fixture test
sequence
Fixture steps through all functions press MENU to exit–




Fixture hours
Displays how many hours of use for the fixture
Operation:
The PB-7 can operate in stand-alone master slave or DMX modes. , ,
Stand-alone/master/slave:
For stand-alone mode, first choose whether sound to light is required by selecting or



 



from . Then select one of the eight pre-programmed modes from option to



 










 


, select for random chase option. Further PB-7 units can be controlled by one
master unit allowing synchronization. Ensure the master unit slave mode is set as



 



and the controlled unit slave mode is set as or . Connect DMX out from the master



 



unit to the DMX in of the slave unit.
DMX mode:
The -7 can be control by DMX signal, simply connect the DMX signal source to the DMX in PB
of the unit via balanced XLR lead. Extra fixtures can be controlled by the same DMX signal a
by looping through the DMX out on the -7. Ensure the correct DMX start address is set from PB
the option on the manual control.





Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: PB-7

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX PB-7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Recharge Performer Instrukcja

27 Września 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025
Gardena

Gardena 4206 Instrukcja

15 Stycznia 2025
Nedis

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025
Philips

Philips HF3304 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025
Livarno

Livarno IAN 103915 Instrukcja

13 Stycznia 2025
ION

ION Party Ball USB Instrukcja

13 Stycznia 2025
Livarno

Livarno IAN 292038 Instrukcja

12 Stycznia 2025
Eurolite

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025