Instrukcja obsługi QTX MHS-40K

QTX Ulga MHS-40K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX MHS-40K (5 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
www.avsl.com 0.4 UK User Manu 15 69 al
M - HS 40K
40W Kaleidoscope Beam LED
Moving Head
Item ref: 0.4 15 69UK
User Manual
A smart, compact moving head comprising a single powerful 30W white LED and RGBW colour wheel to
provide bright colourful effects, spots and washes. This model also features an unusual separate LED
colour ring around the main lens made up of 8 Bright SMDs which work in tandem with the main features.
The MHS-40K can be operated on auto, sound-to-light or DMX modes and can be free standing or
mounted to trussing using the supplied fixing bracket.
In the box:
Your MHS-40K should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expo the unit to rain or damp environments. In the event se
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this ma thoroughly before use, any dama th nual ge
cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 0.4 UK User Manual 15 69
Placement:
• Use the included mounting bracket to fix to a stand or lighting truss.
• Use secondary safety fixings if mounting overhead.
• Keep away from damp or dusty environments.
• Ensure adequate airflow around the fixture housings.
• Ensure ade ate access to ntrols and connections. qu co
• Do not aim LED output directly into line of sight, as this can result in eye injury.
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear venti tion grilles of any dust or debris build-ups. la
• Do not use strong solvents for cleaning the unit.
Rear panel and control
1. Menu button
2. Up button
3. Down button
4. LED display
5. Enter button
6. Microphone
7. DMX input
8. DMX output
9. IEC input (110-240 Vac, 50/60
Hz)
1.
2.
3.
4.
5.
6.
7.
8.
9.
www.avsl.com 0.4 UK User Manual 15 69
Manual control menu:
Press the “ ” buttoMENU n to enter the settings menu.
Press “ ” and “UP DOWN” buttons to navigate through various setting functions.
Press button confirm the desired setting. “ENTER” to
Menu
Function
Description
Addr
A001 - A512
DMX addr settings ess
Chnd
18CH/32CH
DMX channel select
Slnd
Mast/Sl1
Master or slave select
Sl2/d512
Slave to DMX mode 2
Shnd
S - Sh5 h1
Sound active modes (Sh5 is 180° forward lock function)
Sens
0 100-
Sound active mode sensitivity low to high –
Auto
Aut1-Aut5
Auto mode select (Aut5 is 180° forward lock function)
SP1 - SP9
Auto mode speed adjust slow to fast –
Led
On/Off
LED display backlight
disp
psid
Reverse display mode
pan
Yes/No
PAN reverse mode
tilt
Yes/No
Tilt reverse mode
ver
Vxx
Version numb er
rset
Yes/ No
Factory reset
DMX mode:
The MHS- can be cont ll by DMX signal, simply connect the DMX signal source the DMX input on 40K ro ed to
the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signa by looping vi a l
through e DMX out on the To enter DMX mode, select A001 from the u and co m the correct th unit. men nfir
start address using the and by “ ”UP “DOWN ENTER” “ buttons and ”. The A on the LED display will begin
to flash once it s received the DMX signal from the controller. This unit has 18 or 34 DMX channels as ’
indicated in the table below:
18 Channel:
Function
DMX value and description
PAN
0-255 PAN adjust 0- 540°
PAN fine
0-255 PAN fine adjust
Tilt
0- Tilt adjust 0- 255 270°
Tilt fine
0-2 Tilt fine adju 55 st
XY Speed
0-007 Fast to slow
Master dimmer
0- - 255 (0 100%)
RGBW strobe
000 008 - No strobe, 009-251 Strobe (slow to fast), 252-255 No
strobe
Red pattern
0-255 (0- ) 100%
Green pattern
0-255 (0- 100%)
Blue pattern
0-255 (0- 100%)
White Pattern
0-255 (0- 100%)
Pattern rotation
0-255 Forward (slow to fast), Backward (slow to fast)
Wash
0- - 255 (0 100%)
5050 Strobe
000-008 No strobe, 009-251 Slow to fast, 252-255 No strobe
Blank
No Function
5050 Chase
000-127 Colour, 128-255 Colour chase

Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: MHS-40K

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX MHS-40K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Recharge Performer Instrukcja

27 Września 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025
Gardena

Gardena 4206 Instrukcja

15 Stycznia 2025
Nedis

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025
Philips

Philips HF3304 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025
Livarno

Livarno IAN 103915 Instrukcja

13 Stycznia 2025
ION

ION Party Ball USB Instrukcja

13 Stycznia 2025
Livarno

Livarno IAN 292038 Instrukcja

12 Stycznia 2025
Eurolite

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025