Instrukcja obsługi QTX Mesmerizer

QTX Ulga Mesmerizer

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX Mesmerizer (8 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
www.avsl.com 2.745UK User Manual 15
3D Animation Laser
Item ref: 2. 5 15 74 UK
User Manual
Thank you for choosing the X Mesmerizer 3D animation Laser With a stunning set of 440 dynamic and QT
static patterns available including jaw-dropping 3D laser animations, colourful RGBW patterns and wall
washes, the Mesmerizer is sure to pack a punch at any party, show or event. 4 control modes including
auto, sound to light and DMX512 make this compact and lightweight unit perfect for any occasion large or
small.
In the box:
Your Mesmerizer should arrive with you in a single carton in good condition. T carton should contain he
1 main unit with bracket, 1x UK IEC mains lead, 1x laser key and x 1x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this manual thoroughly before use, any dama th ge
Cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 2.745UK User Manual 15
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to operate in accordance
within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The
Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be
downloaded from: www.avsl.com/assets/documents/hsg95.pdf
Placement:
• Use the included mounting bracket to fix to a stand or lighting trus s
• Use secondary safety fixings if mounting overhead.
• Keep away from damp or dusty environments.
• Ensure adequate air- ow around the fixture housings. fl
• Ensure adequate access to controls and connections.
• Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
• Do not use strong solvents for cleaning the unit.
Rear panel controls:
1. LCD display
2. Laser key
3. Mounting point
4. IEC mains in
5. LCD control panel
6. DMX signal in
7. DMX signal out
Manual control menu:
Press the “ ” buttoMENU n to enter the settings menu.
Press “ ” and “UP DOWN” buttons to navigate through various setting functions .
P button confirm the desired setting. ress “ENTER” to
2.
1.
3.
4.
5.
6.
7.
www.avsl.com 2.745UK User Manual 15
Menu
Function
A ddr
A001-A512
CHND
21CH
7CH
Auto
Au0
Au1-Au15
SPEE
SP0- 9 SP
SoUn
So So0- 15
SoSE
SE0-SE9
vEr
vE10
DMX modes:
The Mesmerizer can be controll by DMX signal, simply connect the DMX signal source the DMX input ed to
on the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping vi a
through the DMX out on the To enter DMX mode, select A001 from the menu and co m the correct unit. nfir
start address using the and by “ ”UP “DOWN ENTER” “ buttons and ”. The A on the LED display will begin
to flash once it s received the DMX signal from th controller. This unit has either 7 or 21 DMX channels as ’e
indicated in the tables below:
7- (start addres A001 for 1 unit A008 for 2nd unit etc): CH s st ,
Channel
Function
Value
Details
CH1
Dimmer
0-9
No function
10-255
Total dimmer, laser on and LED for dimmer
CH2
Stro be
0-9
LED No function
10-255
LED Strobe from slow to fast
CH3
LED colour control
0-9
LED No function
10 79-
LED colour ma o cr
80-159
LED jump from slow to fast
160-255
LED gradual change from slow to fast
CH4
Laser colour
control
0-1
Laser off
2- 69
W-R B-P-CYAN-Y-G (Fixed colou -- r)
70 79-
Total colour change (chase speed controlled by CH5)
80 89-
Default colour (chase speed controlled by CH5)
90 94-
Rainbow colour (chase speed controlled by CH5)

Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: Mesmerizer

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX Mesmerizer, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Recharge Performer Instrukcja

27 Września 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 105.632.59 Instrukcja

9 Października 2024