Instrukcja obsługi QTX HIPAR-126

QTX Ulga HIPAR-126

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX HIPAR-126 (4 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
www.avsl.com 154.325UK User Manual
HIPAR-126
Outdoor LED PAR Can RGBWA- UV
Item ref: 4.15 325UK
User Manual
Thank you for choosing the HIPAR-126 high-power LED PAR can fitted with 9pcs of 10W super bright 6-, a
in-1 COB LEDs built into an IP65 weatherproof housing for outdoor or indoor applications. Can be ,
operated standalone from the internal auto programs or via DMX512 controller is more precise control is
required. Pre-wired with waterproof power and DMX signal leads for easy connection and daisy-chaining.
Supplied with split bracket which can also be used as a floor stand. Ideal solution for parties and events
where background colour wash or U/V illumination is required.
In the box:
Your HIPAR-126 should arrive with you in a single carton in good cond T carton should contain ition. he
1 x main unit with bracket and screws, 1x remote contro 1 x UK IEC mains lead and 1 x user guide. l,
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the i and allow the unit to dry out naturally Qualified personnel should then ma ns .
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
C by misuse of product will be covered by warrantaused not y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 4.325 U r Manual 15 UK se
Installation:
• The HIPAR- 6 is supplied with a dual hanging bracket, which can also be used as a free-standing 12
support.
• When install g the fixture, ensure all fixings are secure, controls and connections are accessible and in
allow enough space for air to circulate around the housing. Do not aim directly in line of sight or very
close to people where the extremely bright output of the fi ure may be harmful to eyesight. xt
• The HIPAR- 6 is IP65 weatherproof, and all electrical connections are hard-wired with waterproof 12
connectors. An XLR to waterproof connector is provided for adapting the DMX input lead to a
standard DMX signal input. A ma plug to waterproof connector is provided to adapt the power ins
input lead to a standard mains supply.
• Connect the waterproof connectors securely, ensuring that the notches are aligned for correct
polarity.
• The waterproof plugs have a threaded collar whic must be fully tightened onto the waterproof h
socket.
• The HIPAR- 6 also has DMX through and power through leads for connecting onto further HIPAR 12
cans in a daisy-chain manner. Ensure that the mains power supply is capable of the total load of all
cans co ected. nn
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing and lens as required
• Do not use strong solvents for cleaning the unit
Rear panel controls:
Manual control menu:
Press the “MENU” button to enter the s s menu. etting
Press “ ” and “ ”UP DOWN buttons to navigate through various setting functio ns.
P button save the desired setting. ress “ ”ENTER to
www.avsl.com 4.325UK User Manual 15
Menu
Number range
Function and description
A001
A001-A512
10CH DMX512 address setting
d0 01
d0 -d512 01
6 DMX 2 address setting CH 51
CJ01
CJ01-CJ16
Colour jump (speed slow to fast)
CF01
CF01-CF16
Colour fade (speed slow to fast)
CC00
CC0 CC0- 16
Colour pulse (speed slow to fast)
So UD
Sound to light colour change
CL01
CL01-CL32
Manual colour mix selection
r000
r000-r255
Red dimming (0-100%)
G000
G000-G255
Green dimming (0-100%)
b000
b000-b 255
Blue dimming (0-100%)
u0 00
u000-u255
White dimming (0-100%)
P000
P000-P255
Amber dimming (0-100%)
o0 00
o0 -o255 00
UV dimming (0-100%)
DMX mode:
The HIPAR- can be cont ll126 ro ed by DMX signal, simply connect the DMX sig sourc the DMX input nal e to
on unit via balanced XLR lead. Extra fixtures can be controlled by the same X signal by looping the a DM
through the DMX out on the To enter DMX mode, select A001 from the menu and co m the correct unit. nfir
start address using t and buttons and by he “ ”UP “ ”DOWN “ENTER” to confirm .
This unit has 6 or 10 DMX channels as indicated in the b s l : ta le be ow
10 Channel mode (A001-A512)
Channel
Value
CH1
0-255
CH2
0-255
CH3
0-255
CH4
0-255
CH5
0-255
CH6
0-255
CH7
0-255
CH8
0-255
CH9
0- 49
50 99-
100-149
150-199
200-255
CH10
0-255
6 Channel mode (d001-d512)
Channel
Value
CH1
0-255
CH2
0-255
CH3
0-255
CH4
0-255
CH5
0-255
CH6
0-255

Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: HIPAR-126

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX HIPAR-126, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Recharge Performer Instrukcja

27 Września 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 105.632.59 Instrukcja

9 Października 2024