Instrukcja obsługi QTX GoboPar35

QTX Verlichting GoboPar35

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX GoboPar35 (4 stron) w kategorii Verlichting. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

www.avsl.com 151.741UK User Manual

GoboP ar35

2in1 Light Effect

Item ref: 1.15 741UK

User Manual

Thank you for choosing the GoboP A versatile 2- -1 light effect, combining 4 moving colour gobos ar35, in

and 15 RGB colour-wash LEDs in a compact and convenient package. Power up the unit and simply

control it with the included IR remote control. With a press of a button you can set it to Auto-Run, Sound-

Activation and many other built-in sequences. For more advanced users, it can be connected to a DMX

controller for more sophisticated control. A colourful and flexible stage lighting solution, ideal for mobile

setups as well as permanent installa tions

In the box:

Your GoboPar should arrive with you in a single carton in good cond T carton should contain 35 ition. he

1 x main unit with bracke 1x remote control, 1 x UK IEC mains lead and 1 x manual. t,

Warning:

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event

of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then

check the unit before continuing use.

Please read through this manual thoroughly before use, any damage

Cause by misuse of product will be covered by warrantd not y.

Please do not open cover, contains high voltage. This

product is not serviceable or repairable by the end user.

Please refer to qualified personnel for service and repair.

www.avsl.com 1.741UK User Manual 15

Placement:

• Use the included mounting bracket to fix to a stand or lighting truss

• Use secondary safety fixings if mounting overhead

• Keep away from damp or dusty environments

• Ensure adequate air-flow around the fixture housings

• Ensure adequate access to controls and connections

Cleaning:

• Use a soft cloth with a neutral detergent to clean the casing as required

• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups

• Do not use strong solvents for cleaning the unit

Rear panel controls:

1. DMX Signal in

2. DMX Signal out

3. IEC Mains in

4. LCD display

5. Microphone

6. Manual control buttons

Manual control menu:

Press the “MENU” button to enter the settings menu.

Press “ ” and “ ”UP DOWN buttons navigate through various setting functio to ns.

P button save the desired setting. ress “ ”ENTER to

Number range

Function and description

A001

001-512

DMX address settings 12 channel mode

AU 01

AU01

Gobos and colour wash fast program

AU02

Gobos and colour wash smooth program

AU03

Gobos and colour wash fast and smooth autorun

Sud1

Sound active gobos and colour wash

Sud2

Sound active colour wash strobe effect

Sud3

Sound ac ve c our wash and strobe effect ti ol

Sud4

Sound active gobos and strobe effect

o 0 - or16 r0

Colour wash scroll slow to fast

www.avsl.com 1.741UK User Manual 15

oJ00 - oJ16

Colour wash jump slow to fast

CC01 - CC16

Colour combination gobos and colour washes 1- 16

uJ00 - u 6 J1

Gobo colour jump slow to fast

u 0 - ur16 r0

Gobo colour scroll slow to fast

uP00 - 08 uP

Gobo kaleidoscope forward and reverse

St00 - 6 St1

Strobe effect slow to fast

r000 - r2 55

Red brightness setting low to high ,

G000 - G255

Green brightness set low to high ting,

b000 - b255

Blue brightness setting low to high,

Remote control:

GoboPar35 is supplied with an I.R. remote control for quick access to most of the basic functions of the

unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum

range of approximately 4m. Controls are listed on the layout drawing below.

DMX mode:

The GoboPar can be controll by DMX signal, simply connect the DMX sig l source to the DMX input 35 ed na

on the unit via balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping a

through the DMX out on the To enter DMX mode, select A001 from the menu and co m the correct unit. nfir

start address using the and buttons and to confirm by “ ”UP “ ”DOWN “ ”ENTER .

This unit has DMX channels as indicated in the table below: 12

Channel

Function

Description

CH1

Master dimmer

RGBW from low to high

CH2

Red dimming

low to high

CH3

Green dimming

low to high

CH4

Blue dimming

low to high

CH5

Pattern 1 dimming

low to high

CH6

Pattern 2 dimming

low to high

CH7

Pattern 3 dimming

low to high

CH8

Pattern 4 dimming

low to high

CH9

Whole light strobe

Slow to fast

CH10

Colour wash select ion

0- : CH1 to CH9 control 50

1. LED Display on/off

2. Sound active/Strobe effect

3. Colour brightness adjust

4. Save current setting

5. Colour wash scroll/Gobo colour

scroll

6. Number keypad

7. Up select

8. Gobo & colour wash/Colour

combination

9. Down select

10. Colour wash jump/Gobo colour

jump

11. Gobo kaleidoscope

12. Quick DMX

10.

11.

12.

Specyfikacje produktu

Marka:	QTX
Kategoria:	Verlichting
Model:	GoboPar35
Kolor produktu:	Czarny
Waga produktu:	180 g
Układ:	Komputer stacjonarny
Model:	Podstawowy kalkulator
Wymiary produktu (SxGxW):	120 x 175 x 39.6 mm
Cyfry:	12 cyfr(y)