Instrukcja obsługi QTX Gobo Fireflash

QTX Ulga Gobo Fireflash

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX Gobo Fireflash (4 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
www.avsl.com 151.742UK User Manual
G o Fireflash ob
4 in 1 LED and Laser Effect light
Item ref: 151.742UK
User Manual
Thank you for choosing the QTX Gobo Fireflash LED and Laser Effect Light. A compact and robust metal
4- -1 light effect, combining 6 moving colour gobos, 3 colour Effect ball, a 20W White Strobe LED and in
Dual colour Laser in a compact and convenient package. Easy Setup with auto-run, sound activation and
14 Channel DMX control.
In the box:
Your Gobo Fireflash should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this manual thoroughly before use, any dama th ge
Cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 151.742UK User Manual
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to operate in accordance
within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The
Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be
downloaded from: www.avsl.com/assets/documents/hsg95.pdf
Placement:
• Use the included mounting bracket to fix to a stand or lighting trus s
• Use secondary safety fixings if mounting overhead.
• Keep away from damp or dusty environments
• Ensure adequate air- ow around the fixture housings fl
• Ensure adequate access to controls and connections
• Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
Rear panel controls:
1. IEC mains in
2. Laser key
3. DMX signal in
4. DMX signal out
5. Earth screw (DO NOT
REMOVE)
6. Manual control buttons
7. LCD display
Manual control menu:
Press the “ ” buttoMENU n to enter the settings menu.
Press “ ” and “UP DOWN” buttons to navigate through various setting functions .
P button confirm the desired setting. ress “ENTER” to
2.
1.
3.
4.
5.
6.
7.
www.avsl.com 151.742UK User Manual
Menu
Description
A001
DMX address settings
A1
Auto-run mod - slow to fast e
S1
Sound activation mode 1 less to more sensitive –
S2
Sound activation mode 2 less to more sensitive–
DMX mode:
The Gobo Fireflash can be controll by DMX signal, simply connect the DMX signal source the DMX ed to
input on the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by vi a
looping through the DMX out on the To enter DMX mode, select A001 from the menu and counit. nfirm
the correct start address using the and buttons and The A on the LED by “ ”UP “ ”DOWN “ ”ENTER .
display will begin to flash once it s received the DMX signal from the controller. This unit has 14 DMX ’
channels as indicated in the table below:
Channel
Function
DMX Val ue
Description
1
Motor
0-255
0-9 no rotation, 10-127 forward rotation from slow
to fast, 128-255 reverse rotation fast to slow
2
Master dimmer
0-255
Linear dimmin rom low to high g f
3
Stro be
0-9
None
10-255
Slow to fast
4
RP Gobo
0-255
Red d pink gobos from low to high an
5
G Gobo
0-255
Green gobos from low to high
6
BY Gobo
0-255
Blue and yellow gobos from low to high
7
W Go bo
0-255
White gobo from low to high
8
R Mirr or
0-255
Red mirrorball from low to high
9
G Mirror
0-255
Green mirrorball from low to high
10
B Mirror
0-255
Blue mirrorball from low to high
11
R Laser
0-255
Red laser show on/off
12
G Laser
0-255
Green laser show on/ off
13
W Strobe
0-255
White strobe slow to fast
14
Macro Mode
0- 50
Bla nk
51-255
Autorun full program
Specifications:
Power pply su
110-240Vac, 50/60Hz (IEC)
Power consumption
50W
Fuse rating
F2AL, 5x20mm
Light source
Gobo 6x3W RGBPYW, Ball 3x3W RGB, Strobe
20W, Laser 120mW-red & 30mW-green
DMX channels
14
Dimensions
130x180x140mm (Without bracket)
Weight
1.4 kg
Troubleshooting:

Specyfikacje produktu

Marka: QTX
Kategoria: Ulga
Model: Gobo Fireflash

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX Gobo Fireflash, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga QTX

QTX

QTX DM-X12 Instrukcja

15 Października 2024
QTX

QTX HPWash100 Instrukcja

6 Października 2024
QTX

QTX Moonglow Instrukcja

6 Października 2024
QTX

QTX Recharge Performer Instrukcja

27 Września 2024
QTX

QTX Wash & Beam Instrukcja

27 Września 2024
QTX

QTX TetraCube Instrukcja

27 Września 2024
QTX

QTX BATPAR-18W Instrukcja

27 Września 2024
QTX

QTX TinyMover Instrukcja

27 Września 2024
QTX

QTX Recharge DJ Instrukcja

27 Września 2024
QTX

QTX Multi-Bar Instrukcja

27 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025
Gardena

Gardena 4206 Instrukcja

15 Stycznia 2025
Nedis

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025
Philips

Philips HF3304 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025
Livarno

Livarno IAN 103915 Instrukcja

13 Stycznia 2025
ION

ION Party Ball USB Instrukcja

13 Stycznia 2025
Livarno

Livarno IAN 292038 Instrukcja

12 Stycznia 2025
Eurolite

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025