Instrukcja obsługi QTX Effect 100.615UK

QTX głośnik Effect 100.615UK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX Effect 100.615UK (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
100.615 User Manual UK
Effect: Portable Bluetooth Party Speaker
Item ref: 100.615UK
User Manual
Take the party with you wherever you go, with a portable Bluetooth speaker with colourful LED light show.
Perfect for karaoke kings and queens, simply connect the microphone to showcase your talents and record
sing-alongs with the voice record function. Play your tunes via Bluetooth from your smart device, use the
inbuilt media ports or even FM radio. This speaker is light enough to be carried by shoulder strap and features
an internal rechargeable battery with up to 3 hours power from a single charge.
• Stylish and rugged design
• Connect to your smart device via Bluetooth
• Wired microphone included for karaoke and voice record functions
• LED colour light effect in grille
• Media player with inbuilt FM/USB/AUX and Microphone ports
• Internal rechargeable battery with up to 3 hours playback
• Ideal for karaoke, house parties, kids' rooms and more
Technical Specificat and Features ions
Speaker
6.5" Driver 10W RMS
Frequency range
70Hz- KHz 18
Impedance
4.0 Ohms
Bluetooth version
5.0+EDR
Bluetooth range
Up to 10m (in clear line of sight)
FM Frequency range
87.5MHz-108MHz
Battery type
3.7V 2200mA internal rechargeable Lithium Ion
Battery life
Up to 3 hours (max volume)
Charge time
3 Hours from flat
Input connections
Bluetooth, USB, AUX (3.5mm), micro USB (DC 5V/1A - charge only)
Dimensions
300 250 x 180 mm (W x H x D) x
Weight
1.65kg
Controls Diagram:
100.615 User Manual UK
Unit Controls and Features:
1. Volume co rolnt : Rotate to increase or lower the master volume.
2. Power/mode button ( ): Long press to power the unit on or off. Short press to switch between
modes (Bluetooth/AUX/FM/Record ).
3. Play/pause button ( ): Long press to turn the LED Light show on off. ort press in BT/or Sh USB
mode to play or pause the current track, in FM mode to perform a channel scan and in record mode to
playback a recording.
4. Next track/station button ( ): Short press to move t the next track in BT/USB mode, or next o
station in FM mode. Long press with the microphone inserted to increase the echo/reverb effect. Short
press in record mode to begin the recording session.
5. Previous track/station button ( ): Short press to mov to the previous track in BT/USB mode, or e
previous station in FM mode. Long press with the microphone inserted to decrease the echo/reverb effect.
Short press in record mode to end the recording session.
6. DC in 5V micro USB port: Use the charging cable sup ied and connect to a compatible USB power pl
source for charging or constant power.
7. USB port: Multimedia playback via a USB flash drive or other compatible USB device.
8. AUX in jack: Use to connect to audio output devices with a compatible 3.5mm lead (not sup ied). pl
9. Microphone jack: Connect the wired microphone sup ied for voice playback or record g.pl in
10. LED charging indicator: Glows red when the unit is connected to a compatible USB power source and in
charging mode. Goes out when fully charged.
11. Reset aperture: Press using a pin or sharp object to reset the unit when required.
Charging the battery:
• Fully charge the Effect s internal battery before first use. Use the USB cable provided and only connect to a ’
suitable 5V USB power supply.
• During charging, the indicator will glow red and go out when the unit is fully charged. LED
Note: If the Effect is used while connected to a USB power source, the indicator will always glow, even
when the unit is fully charged.
Bluetooth Mode:
• Select Bluetooth mode by short p ssing the repeatedly until you hear the relevant re Power/mode button
voice prompt.
• The Effect w automatically enter Bluetooth pairing mode and become discoverable from your smart ill
device.
• Enter the Bluetooth device list on your smart device and search fo and select to pair. r “ ”QTX-Effect
• Your device may ask you for a pairing confirmation or code, enter if prompt . When successful, “ ”0000 ed a
pairing tone can be heard.
• Once paired, the Effect will automatically reconnect to your device when both are in Blue oth mode and to
within 10m of each other.
• You can now also use the unit’s Play/pause, Previous track/statio xt track/station n or Ne buttons
to control the music on your connected smart device.
USB mode:
• The Eff t is fitted with a media player which can play compatible music files from the USB port on the ec
back of the unit.
• Simply insert your USB dia and the unit will automatically enter USB mode and a voice prompt can be me
heard. Alternatively, you can select th USB mode by short pressing the e Power/mode button repeatedly
until you hear the relevant voice prompt.
• You can now play o scroll through the tracks using the r Play/pause Previo track/station , us or Next
track/station buttons on the front of the unit.
• The E ect also has a memory function which means it will contin from the last played track on the last ff ue
album played, on the last occasion it was inserted.
100.615 User Manual UK
FM mode:
• Select mode by short pressing the repeatedly until you hear the relevan voice FM Power/mode button t
prompt.
• To perform a channel scan, short press the Play/pause button. The Effect will now scan through the FM
frequ , automaticallency y saving any stations with a strong enough signal.
• Once the scan has finished, you can scroll back and forward thro h the saved channels using the ug
Previous track/statio xt track/station n or Ne buttons accordingly.
Note: If you are experiencing interference or poor signal quality on certain stations, it may be necessary
to move the unit nearer to a window or doorway.
AUX in mode:
• The Effect can also be connected to any audio device with either a single headphone jack or twin 3.5mm
RCA stereo output using the appropriate connection lead (not provided).
• Simply connect the device correctly to the AUX in port on the back the unit and enter the AUX mode by of
short pressing the Power/mode button repeatedly until you hear the relevant voice prompt.
• Music from the connected device can now be played through the Effect s speaker.’
Note: Ensure you have the volume on the connect device rned up to an audible level. The track ed tu
control buttons on the Effe n be able to control the music on t conn ed devi w using the ct wo ’t he ect ce hen
AUX connection.
USB ice record mode: vo
• With a compatible USB device connected to the unit, short pr s the repeatedly es Power/mode button
until you hear the relevant voice prompt.
• Connect the microphone supplied to the ophone jack on the back of the unit.micr
• Next, short press the Next track/station button to begin recording through the connected micropho .ne
• Short press the Previous track/station button to end the current recording session.
• Short press the Play/pause button to liste to the last reco session.n rded
• To listen to all your recording sessions in order press the , Power/mode button and enter norma USB l
playback mode. You can then scroll rough the sessions using the th Play/pause Previous ,
track/station xt track/station or Ne buttons on the front of the unit the same as you would a normal
MP3 album.
Note: To avoid interferen , the unit speaker wil be automatically disabled whilst recording through the ce ’s l
connected microphone.
Using the microphone:
• Connect the microphone supplied to the back of the unit as described above an switch it on.d
• You can now sing along to your favourite music tracks whilst playing them through Bluetooth, USB AUX in ,
and FM modes.
• To adjust the microphone’s echo/reverb effect up and down, long press the Previous track/statio n or
Next track/station buttons accordingly.
Note: The microphone volume can only be controlled by e un s master volume and has no ’s th it’
independent volume control.
LED light show:
• The Effect has an built disco style D light show used within its front grille design. This will be in LE ho
automatically abled when the unit is switched on.en
• To disable the light show at any time, long press the Play/pause button.

Specyfikacje produktu

Marka: QTX
Kategoria: głośnik
Model: Effect 100.615UK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX Effect 100.615UK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik QTX

QTX

QTX PAL15 Instrukcja

10 Października 2024
QTX

QTX PAL8 Instrukcja

2 Października 2024
QTX

QTX 178.843 Instrukcja

24 Września 2024
QTX

QTX QUEST-12A Instrukcja

23 Września 2024
QTX

QTX QUEST-10A Instrukcja

22 Września 2024
QTX

QTX QS15A Instrukcja

10 Września 2024
QTX

QTX QR15PABT Instrukcja

8 Września 2024
QTX

QTX 178.201 Instrukcja

8 Września 2024
QTX

QTX PartyPod Instrukcja

2 Września 2024
QTX

QTX QR12K Instrukcja

29 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025