Instrukcja obsługi QSC Wideline WL218-sw

QSC głośnik Wideline WL218-sw

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC Wideline WL218-sw (14 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
TD-000232-00 ev r C
WideLine Series Loudspeaker S stem User Manualy
WL218-sw subwoofer line array loudspeaker
AF218-sw subwoofer y frame arra
*TD-000232-00*
1675 MacArthur Blvd., Costa Mesa, CA, 92626 USA
Main Number (714) 754-6175 Sales & Marketing (714) 957-7100 or toll free (USA only) (800) 854-4079
Customer Service(714) 957-7150 or toll free (USA only) (800) 772-2834
2
IMPORTANT SAFETY PRECAUTIONS
Install in accordance with QSC instructions , LLC and under the supervision of a licensed Engineer.
Professional
WARNING!
Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, transducers, brackets and
associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of
the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected.
Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected overloading.
Never exceed the rating of the hardware or equipment.
Handles are not qualified to act as rigging points.
Consult licensed, Profession Enginee rea al r garding ph sical equipment in y stallation. Ensure that all local, state and national regulations
regarding the safety and operation of suspended equipment are understood and adhered to.
Warranty (USA only; other countries, see your dealer or distributor)
Disclaimer
QSC, LLC is not liable for any damage to amplifiers or any other equipment that is caused by negligence or impro installation per
and/or use of this loudspeaker product.
QSC 3 ear Limited WarrantyY
QSC, LLC guarantees its products be free
(“QSC”)
to
from defective material and / or workmanship a period of for
three (3) years from
date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under
normal installation and use - prov the unit is returned toided
our factory or one of our authorized service stations
vi prepaid trans-a
portation with a copy of proof of purchase (i.e., sales receipt). This warranty provides that the examination of the return product must
indicate, in our judgment, a manufacturing defect. This warranty d oes not extend to any ct which has been subjected to misu produ se,
neglect, accident, installation, or where the date c improper ode has been removed or defaced. QSC shall not be liable for incid ental
and/or consequen warranty gives specific legaltial damages. This
you righ This limited warranty transferable during thets.
is freely
term
of the warranty period.
Customer may have additional rights, vary from state to state.which
In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited war-
ranty shall not t unauthorized , apply. Removal of the serial number on this oduct, or purchase of this pr produc from an dealer will void this
limited arranty. w
Periodically, this warranty is updated. o obtain the most recent T
version of QSC s warranty statement, please visit www.qsc’ .com.
Contact us at 800-854-4079 or visit our website at www.qsc.com.
© Copyright 2017, QSC LLC ,
QSC® is a registered trademark of QSC , LLC
Speakon®
is a registered trademark of Neutrik® and the names of Neutrik® ucts enced herein are either tra and/or service prod refer demarks
marks of eutrik®. N
All trademarks are the prop of their respective owners. erty
“QSC” and the QSC logo with e U.S. Patent r Office are registered th and T ademark
3
Introduction
The WL218-sw is a dual 18-inch (457mm) subwoofer designed for suspended or ground stacked use in touring or installed concert appli-
cations. With an impressive combination of sonic impact, low-frequency extension, and accuracy, the WL218-sw is an ideal companion
for QSC's WideLine as well as other professional sound reinforcement systems.
Suspension of WL218-sw subwoofers is easy using the AF218-sw, a heavy-duty array frame constructed of welded 6061-T6 aluminum. In
ground-supported applications, the WL218-sw may be stacked using the interlocking feet and recess features machined into the enclo-
sure's ends.
The woofers incorporate a double layer spider and triple roll surround for extended and controlled excursion at high power. The 4-inch
(102mm) voice coil is wound on a fibreglass former to prevent deformation at high operating temperatures and is extensively vented to
reduce power compression. An aluminum demodulating ring is employed for low distortion. Each woofer is housed in a separate chamber
to prevent failure of one driver from causing damage to the other. A 14-gauge (1.9mm) powder coated steel grill protects the drivers.
Enclosure construction features premium quality birch plywood finished in an environmentally friendly, water-borne, polymer finish that's
tough and field repairable. Extensive internal bracing and exclusive use of birch plywood minimizes acoustic loss due to panel resonance.
Ample port area allows air to move freely with minimal turbulence. The ports are arranged so as to eliminate asymmetrical loading of the
woofers, further protecting the drivers.
Transport and handling features are also provided in the WL218-sw's design. No matter how the box is deployed, one of the dozen han-
dles will be where it needs to be. The included dolly has rugged, 3.5-inch ball bearing casters and an easy-to-use, snap-on mechanism for
attachment to the enclosure.
For users of QSC's digital audio transport and processing products, QSControl.net / Basis DSP files tuned for use with WL218-sw are
available for download. Visit us at http://www.qscaudio.com for the latest products, and news.
WL218-sw Loudspeaker
1- Handles
2- Stacking recesses
3- Stacking feet
4- Receiver tubes with ball lock pins & captive articulated joints
5- Dolly board latch plates
6- Grille
7- Skids
8- Serial number plate
9- Rear link and receiver block
10- Input connector plate
1
2
3
4
5
6
7
8
9
10

Specyfikacje produktu

Marka: QSC
Kategoria: głośnik
Model: Wideline WL218-sw

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QSC Wideline WL218-sw, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik QSC

QSC

QSC AD-DWL.180 Instrukcja

13 Września 2024
QSC

QSC SR-5152 Instrukcja

13 Września 2024
QSC

QSC SC-1120 Instrukcja

13 Września 2024
QSC

QSC AD-P6T Instrukcja

13 Września 2024
QSC

QSC GP218-sw Instrukcja

13 Września 2024
QSC

QSC AcousticDesign AD-C821 Instrukcja

13 Września 2024
QSC

QSC AD-S282H Instrukcja

13 Września 2024
QSC

QSC AcousticDesign AD-S.SAT Instrukcja

13 Września 2024
QSC

QSC K12 Instrukcja

13 Września 2024
QSC

QSC AD-DWL.SUB Instrukcja

12 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024