Instrukcja obsługi QSC GP118-sw

QSC głośnik GP118-sw

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC GP118-sw (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
The GP218-sw is a premium, high-
performance, direct radiating dual 18-inch
subwoofer designed for use in portable
and installed sound applications. This
powerful subwoofer offers plenty of
“punch” while maintaining ample extension
so the musically important fundamentals
are solidly and accurately reproduced.
With an impressive combination of
low-frequency extension and musical
accuracy, the GP218-sw is an ideal
companion to QSC’s WideLine Series, ILA
Series, AcousticPerformance™ Series and
AcousticDesign™ Series loudspeakers.
The GP218-sw features two 18-inch
transducers that incorporate a double layer
spider and triple roll surround for extended
and controlled excursion at extreme power.
The 4-inch voicecoil is wound on a fiberglass
former to prevent deformation at high
operating temperatures and is extensively
vented to reduce power compression. An
aluminum demodulating ring is employed to
further reduce distortion.
The GP218-sw is housed in an 18mm
Baltic birch plywood enclosure and finished
in an environmentally friendly, waterborne,
polymer finish rugged enough for the
demands of everyday use while also
being field repairable. Internal bracing is
employed to eliminate acoustic losses due
to panel resonance while maintaining the
enclosure’s robustness.
Further contributions to cabinet rigidity
include vent walls constructed of the same
plywood as the enclosure. Ample port area
allows free movement of air resulting in
minimal turbulence and port distortion.
Finishing the enclosure’s aesthetic design,
the transducer is protected by a 16-gauge,
powder coated steel grille.
To aid in transporting the GP218-sw, the
unit features built-in handles with options
for a dolly board and soft cover. For
increased versatility, the GP218-sw can be
stacked vertically using their interlocking
feet and recess features machined into the
enclosure’s top panel.
Features
• Dual premium-grade, long
excursion, high power 18-inch
transducers with 4-inch
voicecoil, dual layer spider
and triple-roll surrounds
• Interlocking feet and recess
features allow for allow for
rigid vertical stacking
• Built-in handles along with
the optional dolly board
and soft cover offers ease of
transport
• M10 fittings allows for
suspension in permanent and
portable applications
• Dual NL4 Speakon connectors
• 18mm Baltic birch plywood
construction
• 16-Gauge powder coated
Steel Grilles
• Available in black and white
• Complete EASE, CAD & BIM
information available online
GP Series
GP218-sw
High Output, Direct Radiating,
Vented Subwoofer
GP218-sw
Performance Spaces ∙ Worship Facilities ∙ Portable and Live Sound
∙ Dance Clubs ∙ Indoor Sports Facilities ∙ Themed Entertainment
System Details
Frequency Range (-10dB) 24Hz – 1.2kHz
Power Capacity11700W (82.5V) continuous
3400W peak
Nominal Sensitivity2102dB, 1W@1m
Maximum Rated SPL 135dB @1m, continuous3
141dB @1m, peak4
Nominal Impedance 4
Transducer 457mm (18-inch) driver with 102mm (4-inch)
Voicecoil
Recommended Power 3000 - 4000W
Enclosure Details
Input Connector Dual NL4 connector
Pin Outs 1+/1- Sub
2+/2- N/C
Enclosure Material 18mm Baltic birch plywood
Attachment Points 16x threaded M10 inserts
Grille 16 Gauge powder coated steel
Dimensions (HxWxD) 508 mm x 1198 mm x 762 mm
(20" x 47.2 x 30" ")
Net Weight 87 kg (191 lb)
Shipping Weight 95 kg (209 lb)
Optional Accessories CP218-0 transportation dolly
CP218-1 transportation dolly plus soft cover
As part of QSC’s ongoing commitment to product development, specifications are
subject to change without notice.
Specifications:
GP218-sw Spec Sheet 12/3/2012
1675 MacArthur Boulevard Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 please recycle
Front
Side
Top
GP218-sw Details
© 2012 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered
trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other
countries. DMT is a trademark of QSC. Speakon is a registered trademark of Neutrik
1 2 hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance
3 Calculated as the nominal sensitivity plus 10x the log of continuous
rated power in volts squared divided by nominal impedance
4 Calculated as the continuous calculated max output plus 6dB


Specyfikacje produktu

Marka: QSC
Kategoria: głośnik
Model: GP118-sw

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QSC GP118-sw, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik QSC

QSC

QSC AD-DWL.180 Instrukcja

13 Września 2024
QSC

QSC SR-5152 Instrukcja

13 Września 2024
QSC

QSC SC-1120 Instrukcja

13 Września 2024
QSC

QSC AD-P6T Instrukcja

13 Września 2024
QSC

QSC GP218-sw Instrukcja

13 Września 2024
QSC

QSC AD-S282H Instrukcja

13 Września 2024
QSC

QSC K12 Instrukcja

13 Września 2024
QSC

QSC AD-DWL.SUB Instrukcja

12 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024