Instrukcja obsługi QSC AD-S282H

QSC głośnik AD-S282H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC AD-S282H (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

*TD-000148-00*

TD-000148-00 rev.B

High-power Two-way Multi-Use Loudspeaker

• two 8-inch (203mm) neodymium magnet low-frequency drivers

• 1-inch throat compression high-frequency driver

• yoke mount

I-282H Speakon® input, pole cup, and floor-mount swivel feet. Bi-amp capable, 8 ohm

AD-S282H bi-amp capable, 8 ohm

AD-S282HT 70V/100V transformer equipped, bypassable to 8 ohm

IMPORTANT SAFETY PRECAUTIONS

& EXPLANATION OF SYMBOLS

1- Read these instructions.

2- Keep these instructions.

3- Heed all warnings.

4- Follow all instructions.

5- Clean only with a dry cloth.

6- Install in accordance with QSC Audio Product’s instructions and a licensed, professional engineer.

7- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-

fiers) that produce heat.

8- Only use attachments/accessories from QSC Audio Products, Inc.

9- Use only with mounts or brackets specified by QSC Audio Products.

10- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any

way.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in this manual.

WARNING! Before placing, installing, rigging, or suspending any speaker product, inspect all hardware,

suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, cor-

roded, deformed or non-load rated component could significantly reduce the strength of the installation,

placement, or array. Any such condition severely reduces the safety of the installation and should be

immediately corrected. Use only hardware which is rated for the loading conditions of the installation

and any possible short-term unexpected overloading. Never exceed the rating of the hardware or equip-

ment. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical

equipment installation.

Warranty (USA only; other countries, see your dealer or distributor)

Disclaimer

QSC Audio Products, Inc. is not liable for any damage to amplifiers, or any other equipment that is caused by negligence or

improper installation and/or use of this loudspeaker product.

QSC Audio Products 3 Year Limited Warranty

QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of

three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the

defect occurs under normal installation and use - provided the unit sta-is returned to our factory or one of our authorized service

tions via pre-paid transportation with a copy of proof of purchase (i.e., sales receipt). This warranty provides that the examination

of the return product must indicate, in our judgment, a manufacturing defect. This warranty does not extend to any product which

has been subjected to misuse, neglect, accident, improper installation, or where the date code has been removed or defaced. QSC

shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal rights. This limited warranty

is freely transferable during the term of the warranty period.

Customer may have additional rights, which vary from state to state.

In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited

warranty shall not apply. Removal of the serial number on this product, or purchase of this product from an unauthorized dealer,

will void this limited warranty.

Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscau-

dio.com.

QSC® is a registered trademark of QSC Audio Products, Inc.

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office

Speakon® ® is a registered trademark of Neutrik AG, OmniMount is a registered trademark of OmniMount Systems, Phoenix, AZ, USA

Introduction

Thank you and congratulations on your purchase of the I-282H, AD-S282H, or AD-S282HT

multi-use, weather resistant loudspeakers. These products represent the state-of-the-art

in lightweight sound reinforcement loudspeaker systems. To get the most from your

investment, we encourage you to review this manual carefully.

These loudspeaker systems are full range, high output, two-way designs delivering supe-

rior sound quality and high SPL in a weather resistant enclosure. The low frequency driv-

ers feature neodymium magnets, while the high frequency driver features a ferrite

magnet. The included yoke mount provides secure and versatile installation. These loud-

speakers make an excellent choice for a wide variety of applications. All models include

an adapter plate for users who desire to use OmniMount®’s suitable loudspeaker mount-

ing options.

The I-282H features two Speakon® connectors wired in parallel for fast, reliable connec-

tion and easy parallel connection of multiple loudspeakers. The Speakon connectors are

wired for passive or bi-amp use and have a selector switch for bypassing the crossover

when used in bi-amp applications. Additionally, the I-282H includes two swivel “outrig-

ger” feet for converting the yoke mount to a floor monitor application.

The AD-S282H and AD-S282HT models feature weather resistant input wiring covers and

wiring strain relief bushings. They also include socket head screws for applications where

enhanced mounting security may be desired (used in place of the yoke mount retaining

knobs).

The AD-S282H model is bi-amp capable and features a crossover bypass switch.

The AD-S282HT is 70V/100V matching transformer equipped complete with an integral

power-tap selector switch. The transformer may be bypassed for low impedance (8 ohm)

application versatility. Two sets of parallel-connected input wiring barrier-strip terminals

are provided for connecting multiple loudspeakers.

What’s Included

I-282H

•I-282H loudspeaker (1 each)

•Yoke mount (1 each)

•Yoke mount retaining knobs (2 each)

•M10 x 1.0 x 23mm socket head screws, with flat and lock washers for security-enhanced yoke mounting (2 each)

•Yoke mount insert plugs for non-yoke mount applications (2 each)

•Swivel feet and retaining knobs for floor monitor applications (2 each)

•Self-adhesive rubber feet for swivels (4 each)

•Omni-Mount adapter plate and M4 self-tapping retaining screw (1 each)

•This User Manual

AD-S282H and AD-S282HT

•AD-S-282H or AD-S282HT loudspeaker (1 each)

•Yoke mount (1 each)

•Yoke mount retaining knobs (2 each)

•M10 x 1.0 x 23mm socket head screws, with flat and lock washers for security-enhanced yoke mounting (2 each)

•Yoke mount insert plugs for non-yoke mount applications (2 each)

•Input wiring cover and gasket (1 each)

•Input wiring cover retaining screws, M4 x 1.4 x 15 mm (2 each)

•Input wiring strain relief bushing with wire hole (2 each, may be part of cover)

•Input wiring strain relief bushing, no wire hole (1 each)

•Strain relief bushing retaining nut with wire hole (2 each)

•Strain relief bushing retaining nut, no wire hole (1 each)

•Omni-Mount adapter plate and M4 self-tapping retaining screw (1 each)

•This User Manual

Specyfikacje produktu

Marka:	QSC
Kategoria:	głośnik
Model:	AD-S282H
Kolor produktu:	Czarny
Materiał obudowy:	Aluminium
Wysokość produktu:	665 mm
Szerokość produktu:	259 mm
Głębokość produktu:	290 mm
Waga produktu:	12600 g
Ilość na paczkę:	1 szt.
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Impedancja:	8 Ω
Moc wyjściowa (RMS):	450 W
Kanały wyjścia audio:	- kan.
Waga wraz z opakowaniem:	16100 g
Rodzaj opakowania:	Pudełko
Zasięg częstotliwości:	80 - 27700 Hz
Rozmieszczenie głośników:	Podłoga
Obudowa głośnika:	Przeniesiony
Ilość przetworników:	2
Czułość:	93 dB
Typ głośnika:	2-drożny