Instrukcja obsługi QSC AD-C6T

QSC głośnik AD-C6T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC AD-C6T (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

AcousticDesign (AD)

Quick Start Guide

Model: AD-C6T

TD-000534-00-A

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result

may be bodily injury or death.

The term indicates instructions regarding possible damage to physical equipment. If these instructions are “CAUTION!”

not followed, it may result in damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term “NOTE” is used to indicate additional useful information.

The intent of the lightning ash with arrowhead symbol in a triangle is to alert the user to the presence of

un-insulated “dangerous” voltage within the product’s enclosure that may be of sucient magnitude to

constitute a risk of electric shock to humans.

The intent of the exclamation point within a triangle is to alert the user to the presence of important safety,

and operating and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

• Only use attachments/accessories specied by the manufacturer.

• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power‑supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

• Do not use this apparatus in or near water or liquids.

• Do not submerge the apparatus in water or liquids.

• Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

• Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.

• Keep ventilation opening free of dust or other matter.

• Adhere to all applicable, local codes.

• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Maintenance and Repair

Advance technology, e.g., the use of modern materials and powerful electronics, requires specially adapted

maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons

and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be

performed only by a QSC authorized service station or an authorized QSC International Distributor. QSC is not

responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the

apparatus to facilitate those repairs.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC, en www.qsc.com

Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC à www.qsc.com

Besuchen Sie die Webseite von QSC (www.qsc.com) um eine Kopie der beschräenkte Garantie von QSC zu erhalten.

如果您想要有限保修的複印本，请造访音频产品的网站QSC QSC www.qsc.com

Mount the Loudspeaker

Refer to .Figure 5

1. Make sure all of the dog-ears are fully extended and in their

non-capture position.

2. Position the loudspeaker into the hole prepared in the ceiling.

3. Use a Phillips screwdriver to tighten each of the three dog-ear screws.

As you tighten the screws, the dog-ears will swing into capture position

over the ceiling. Be sure all dog-ears are properly positioned over the

ceiling.

4. Tighten the dog-ears until rm contact is made with the ceiling surface.

CAUTION:

Do not overtighten the dog-ear screws! Insert

the grille saftey tether grommet into supplied hole on the

loudspeaker bae and install the grille.

Prepare Ceiling

Refer to Figure 1.

1. Use the template provided to mark and cut a hole (1) in the ceiling

where the loudspeaker is to be installed. For frame-construction

ceiling, skip to “Wire the Loudspeakers”.

2. Install two V-rails (2), one on each side of the hole, and supported by

the suspended-ceiling support rails (3).

3. Install the C-ring (4) over the hole, using the V-rails as support. Make

sure the clips on the C-ring are properly tted over the V-rail.

4. Use sheet-metal screws (5) to secure the C-ring to the V-rails.

Wire the Loudspeakers

1. Set the transformer tap switch located under the grille for the desired

wattage setting or 16Ω for low impedance operation as shown in Figure 2.

2. Back out the conduit covers Phillips retaining screw to its stop point and

pull the conduit cover straight out to remove as shown in . Figure 3

3. Pass the wires through the conduit/stress-relief clamp, leaving enough

wire for making connections. Carefully tighten the clamp over the wires,

or over the conduit if used.

4. Wire the female Euro-style plug as shown in .Figure 4

5. Plug the connector securely into the receptacle.

6. Reattach the conduit cover and secure with the Phillips retaining screw.

‑ Figure 1. ‑

‑ Figure 2. ‑

‑ Figure 4. ‑

‑ Figure 5. ‑

‑ Figure 3. ‑

Dog-ears against loudspeaker

Turn the screw clockwise to engage the

dog-ear with the ceiling.

Parallel Wiring Diagram

Amp

To more

speakers

70V 100V

16Ω

7.5

N/A

Specyfikacje produktu

Marka:	QSC
Kategoria:	głośnik
Model:	AD-C6T
Kolor produktu:	Biały
Materiał obudowy:	Acrylonitrile butadiene styrene (ABS), Steel
Wysokość produktu:	237 mm
Szerokość produktu:	- mm
Głębokość produktu:	- mm
Waga produktu:	4300 g
Szerokość opakowania:	737 mm
Wysokość opakowania:	330 mm
Głębokość opakowania:	381 mm
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Impedancja:	16 Ω
Moc wyjściowa (RMS):	60 W
Zakres temperatur (eksploatacja):	-20 - 50 °C
Kanały wyjścia audio:	- kan.
Waga wraz z opakowaniem:	12600 g
Rodzaj opakowania:	Pudełko
Zasięg częstotliwości:	65 - 20000 Hz
Rozmieszczenie głośników:	Możliwość montażu sufitowego
Ilość przetworników:	1
Głośnik wysokotonowy:	Tak
Głośnik niskotonowy:	Tak
Czułość:	88 dB
Typ głośnika:	2-drożny
Średnica:	280 mm
Liczba głośników wysokotonowych:	1
Liczba głośników niskotonowych:	1
Średnica głośnika wysokotonowego:	19 mm
Średnica głośnika niskotonowego (imperial):	6.5 "
Średnica głośnika niskotonowego:	165 mm