Instrukcja obsługi Pyle PWMA220BM

Pyle Kołyska/stacja dokująca PWMA220BM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PWMA220BM (4 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Portable Karaoke PA Speaker Amplifier
and Microphone System
PWMA220BM
Wireless BT Streaming, Built-in Rechargeable Battery
(Includes Belt Pack Transmitter, Headset, Lavalier & Wired Handheld Microphone)
www.PyleUSA.com www.PyleUSA.com
*Wireless Microphone Operating Frequency Range: 203.4 - 215.2 MHz
FEATURES
1. Built-in Wireless BT Streaming MP3 player.
2. Built-in one channel wireless microphone and one 6.35mm MIC in socket to
connect wired dynamic MIC. Two persons can speak or sing at the same time.
3. One 3.5mm keyboard in socket to connect electronic device. And one 3.5mm
cassette in socket to connect cassette player or other audio player.
4. One 3.5mm REC out socket can be connected to a recording device or to the
input jack of a power amplier to further amplify and enlarge the audio power.
5. Master power/volume control. Bass,Treble and Echo controls.
Suitable for karaoke.
6. Powered externally with AC, 12V DC or internally with built-in 12V/1.8A
lithium battery or (6) x 'D' Batteries. Suitable for both indoor and outdoor use.
7. Ideal for many applications, including use in classrooms, conference/meeting
rooms, churches, health clubs and small auditoriums.
CAUTION
1. This unit is with speaker inside which can cause magnetic eld.
Keep this unit at least 60cm away from computer or TV.
2. This unit is with built-in rechargeable battery. Please recharge the battery
every 2 months if you are not going to use the unit for a long period of time
or the battery may be damaged.
3. If the battery is damaged please replace with same specications battery
and dispose the damaged battery environment friendly.
4. Free from high temperature. Don't expose the device to the hot equipment.
5. Don't place the device in the environment of humidity and dirts.
6. Place the device in the ventilated environment.
7. Don't pull the power cord while you pull out the plug. Hold the plug tightly
to pull it out.
8. Pull out the AC power if you will not use the device for a long time.
9. Your operation must be subjected to the specied voltage marked near the
AC in jack and complied with this guide.
1 2
PARTS DESCRIPTION
1. Echo control
2. Treble control
3. Bass control
4. Power/volume switch
5. MIC IN socket
6. DC IN socket
7. Power indicator
8. Battery charging indicator
9. Wireless receiver RF indicator
10. Wireless receiver antenna
11. MP3 LED display
12. MP3 mode
13. MP3 play/pause/repeat
14. MP3 previous/volume down
15. MP3 next/volume up
16. USB port
17. Microphone holder
18. Speaker
19. Keyboard in socket
20. Cassette in socket
21. REC out socket
22. Battery compartment for
(6) x 'D' Batteries
18
1 2 3 4 5 6 7 8 9
12
13
14
15
16
17
10
11
19
20
21
22
www.PyleUSA.com www.PyleUSA.com
OPERATION ON AC POWER
Plug one end of provided AC cord into the AC input jack on the left side
of the amplier. Then plug the other end of AC cord into AC power outlet. Turn
on the unit using the power/volume switch.
NOTE: To avoid damaging your unit, make sure AC power is same as that
marked near AC input jack)
OPERATION ON DC POWER
This unit can be powered also using external 12V DC power. Connect external
12V DC power to DC input jack on the front of the amplier. Observe the
correct polarity as following.
OPERATION ON RECHARGEABLE BATTERY
This unit can be powered internally using the built-in rechargeable battery.
When AC power is connected, if battery charging indicator lights red, the
rechargeable battery is not fully charged and will be allowed to charge while
the unit is powered by the AC power. ( Turning o the unit power switch Note:
will allow the battery to recharge more quickly.) If the battery charging indica-
tor lights green, the battery is fully charged and ready to power the unit alone.
Shut o the power switch and disconnect the AC power. Turn the unit back on
and the rechargeable battery will power the unit alone.
OPERATION ON 'D' BATTERIES
This unit can also be powered internally with (6) x 'D' Batteries. Insert the
batteries while observing the correct polarity as marked. For longest operation
use only alkaline or rechargeable batteries. Replace the batteries when the
output volume drops or the range of the wireless decreases.
Note: This unit does not recharge batteries. When using 'D' Batteries, do not
connect AC or DC power.
3 4
CONNECTION
• The KEYBOARD IN socket can be connected to a electronics device.
• The socket can be connected to a cassette player or other CASSETTE IN
audio player.
• The socket can be connected to a recording device or to the input REC OUT
jack of a power amplier to further amplify and enlarge the audio power.
• The socket can be connected to wired dynamic MIC. Keep MIC head MIC IN
away from the speaker of main unit to avoid feedback.
BLUETOOTH/MP3 OPERATION
1. Insert ash drive into USB port or Micro SD Memory Card into Micro SD
card slot, system will play the music in ash drive or Micro SD Card
automatically. If both ash drive and Micro SD Memory Card are inserted,
system will play the music in ash drive. To play music in Micro SD Memory
Card press MODE button to switch to SD mode.
2. To play music from your mobile phone etc via bluetooth, press MODE button
to switch to BT mode. Turn on bluetooth function of your mobile phone and
search for Pyle Audio and connect. Then you can play your music in mobile
phone.
ATTENTION
1. If feedback (howling sound) occurs, try rst turning down the treble control.
If feedback still is present, try turning down the volume or repositioning this
unit with respect to the wired or wireless microphone being used.
2. Extend the antenna fully whenever using the wireless microphone to ensure
optimum performance and maximum range.
BELT PACK TRANSMITTER OPERATION
Parts Description
1. Power On/O/Mute switch
2. MIC input socket
3. Power/low battery Indicator
4. Gain adjustment
5. Battery compartment/cover
6. Lapel MIC
7. Headset MIC
5
41 2 3
6
7

Specyfikacje produktu

Marka: Pyle
Kategoria: Kołyska/stacja dokująca
Model: PWMA220BM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PWMA220BM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kołyska/stacja dokująca Pyle

Pyle

Pyle PWPBT05BL Instrukcja

4 Października 2024
Pyle

Pyle PHST92IBGL Instrukcja

20 Września 2024
Pyle

Pyle PWPBT75BL Instrukcja

13 Września 2024
Pyle

Pyle PMS8R Instrukcja

11 Września 2024
Pyle

Pyle Jam Tunes Box Instrukcja

30 Sierpnia 2024
Pyle

Pyle PMS2B Instrukcja

28 Sierpnia 2024
Pyle

Pyle PIP711 Instrukcja

26 Sierpnia 2024
Pyle

Pyle PWPBT10 Instrukcja

23 Sierpnia 2024
Pyle

Pyle PMS2R Instrukcja

23 Sierpnia 2024
Pyle

Pyle PMS2W Instrukcja

18 Sierpnia 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago

Vorago KSP-600 Instrukcja

9 Października 2024
Gembird

Gembird DD-U3M2 Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS02UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS01UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS04UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS03UF Instrukcja

9 Października 2024
Bose

Bose SoundLink Flex 2nd Gen Instrukcja

9 Października 2024
StarTech.com

StarTech.com UNIDOCK3UEU Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU2EGB Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU3FGB Instrukcja

9 Października 2024