Instrukcja obsługi Pyle PVNP30BT
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PVNP30BT (2 stron) w kategorii gramofon. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
MODEL : PVNP30BT
OPERATING INSTRUCTIONS
Please read before use
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SPECIFICATION
Frequency Range : AM:540-1700kHz (AM = MW)
: FM 88-108MHz
POWER SOURCE :
120V AC
SPEAKER OUTPUT : 1.5W
SPEAKER SIZE : 40x90mm, 8ohm 3W x 2
SPEAKER WATT :
2 x 3W
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4. Phono function
Turn the “Function” Knob (1) to Phono. Place the record onto the turntable (18). Select the turntable speed
by sliding the “33/45/78 rpm” switch (23) on the right side of the turntable. Unlock the tone arm (21) by
release the lock (25), then lift up the tone arm and gently place the tone arm onto the record to play. If want
to stop, lift up the tone arm and place it back to the arm rest (25).
Re-mark:
1. If you want the turntable mechanism stop at the end of the record, select “Auto Stop” selector switch (26)
at “On” position. If the record stops playing before the end of the record, select “Auto Stop” selector switch
(24) “Off” position. The turntable mechanism will continuous to spin.
2. Place the 45rpm adaptor (19) t the centre before placing 45 rpm record onto the turntable.
5. Bluetooth function
Turn the “Function” Knob (1) to Line In. It will automatically assign to Bluetooth function and will sound. Also,
there is a Red/blue led light located at the bottom of the dial scale will flash alterively. Activate your Bluetooth
device and search for ID(Speaker) and connect. Once the unit is connected with the Bluetooth device, the
led light location on the bottom of the dial scale will flash in only blue color. Then select songs by control
your Bluetooth device.
6. Line in function
Turn the “Function” Knob (1) to Line In. It will automatically assign to Bluetooth function. Plug in the Aux-in
cable into the “Line-in Jack”(9), it will change to line-in function. Connect the other end of the Aux-in cable to
other external audio source to start playback.
7. RCA (L/R) Output Function
Using the RCA Cable to connect the RCA (L/R) output jack (28) at the rear of the unit to any external
amplifier RCA input jack to play music from external source.
Power up the unit
Insert the AC power cord (30) into the AC socket. Turn the Power On/Off Volume Knob (4) clock-wise to turn on the unit.
1. Radio/Tuner function
Turn the “Function” knob (1) to Radio, then select Am/Fm channel by sliding the “Am/Fm” slide switch (14). To select
radio station, adjust the Tuning knob (3) at the centre of the unit to select your favorite station. In order to achieve better
FM reception, extend the FM antenna (29).
2. CD function
Turn the “Function” Knob (1) to USB/CD, then press “Open/Close” button (7) to place CD into CD tray. Press again to
close the CD door. The CD Led Display will show the total number of tracks and then start to play. Press “Play/Pause”
button (6) to enter pause mode. Press “Play/Pause” button one more time to resume playback. Press “B. Skip” (13) or
“F. Skip” (15) to select your ideal track. Press “Stop” button (8) to stop playing. For repeat function, press “Repeat
button” (5) once to repeat one single track and press one more time to repeat all tracks. Press again to cancel repeat
function. To program the tracks, press “Program Button” (16), then press “B. Skip” (13) or “F.Skip” (15) button to select
your ideal track and press “Program button”. The unit can program up to 20 tracks.
Remark: Program function does not work during playback.
3. USB function
Turn the “Function” Knob (1) to USB/CD, the display will flash for CD function. Press the USB/CD button on the side of
the unit to switch to USB mode. The display will show USB for few seconds and will start playback automatically. Press
“Play/Pause” button (6) to enter pause mode. Press “Play/Pause” button one more time to resume playback. Press “B.
Skip” (13) or “F. Skip” (15) to select your ideal track. Press “Stop” button (8) to stop playing. For repeat function, press
“Repeat button” (5) once to repeat one single track and press one more time to repeat one single folder. Press again to
repeat all folders and Press again to cancel repeat function.
Location of Parts
1. Function Knob
2. Dial Scale
3. Tuning Knob
4. Power On/Off Volume Knob
5. Folder/Repeat Button
6. Play/Pause Button
7. Stop Button
8. CD Door Open/Close Button
9. 3.5mm Line-in Jack
10. CD Led Display
11. CD Door
12. Earphone Jack
13. B. Skip Button
14. Am/Fm Band Switch
15. F. Skip Button
16. Program Button
17. Turntable Shaft
18. Turntable Platter
19. 45 rpm adaptor
20. Lift Lever
21. Tone Arm
22. Cartridge
23. 33-1/3, 45 and 78 rpm selector switch
24. Auto/Manual Stop selection switch
25. Tone Arm Rest
26. Speaker
27. Air hole
28. RCA(L/R) Line-Out Jack
29. FM Antenna
30. AC cord
31. Main Power On/Off Button
IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS
PLEASE READ CAREFULLY THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE
APPLICABLE TO YOUR EQUIPMENT.
1. Read Instructions – All the safety and operating instructions should be read before the appliance
is operated.
2. Retain Instructions – The safety and operating instructions should be retained for future
reference.
3. Heed Warnings – All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow instructions – All operating and use instructions should be followed.
5. Water and Moisture – The appliance should not be used near
water-for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near swimming pool and the like.
6. Carts and Stands – The appliance should be used only with a cart or stan that is recommended
by the manufacturer.
6A. An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart combination to overturn.
7. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation – The appliance should be situated so that its location or position does not interfere
with-its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation openings; or placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air through the ventilation openings.
9. Heat – The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources – The appliance should be connected to a power supply only of the type
described in the operating instructions or a marked on the appliance.
11. Grounding or Polarization – Precautions should be taken so that the grounding or polarization
means of an appliance in not impeded.
12. Power – Cord Protection – Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, and the point where they exit from the appliance.
13. Cleaning – The appliance should be cleaned only as recommended by the manufacturer.
14. This product is designed for use with the antenna attached and should not be connected to any
other external antennas.
15. Nonuse Periods – The power cord of the appliance should be unplugged from the outlet when
left unused for a long period of time.
16. Object and Liquid Entry – Care should be taken so objects do not fall and liquids are not spilled
into the enclosure through openings.
17. Damage Requiring Service – The appliance should be serviced by qualified service personnel
when:
A. The power-supply cord the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally, or exhibits a marked change inperformance;
or
E. The appliance has been dropped. Or the enclosure damaged.
18. Servicing – The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.
Specyfikacje produktu
| Marka: | Pyle |
| Kategoria: | gramofon |
| Model: | PVNP30BT |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pyle PVNP30BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje gramofon Pyle
9 Października 2024
2 Października 2024
2 Października 2024
30 Września 2024
9 Września 2024
6 Września 2024
5 Września 2024
23 Sierpnia 2024
20 Sierpnia 2024
16 Sierpnia 2024
Instrukcje gramofon
- gramofon Sony
- gramofon Pioneer
- gramofon SilverCrest
- gramofon Technics
- gramofon Onkyo
- gramofon Kärcher
- gramofon Muse
- gramofon Nedis
- gramofon Medion
- gramofon Lenco
- gramofon Majestic
- gramofon Jensen
- gramofon ILive
- gramofon Teac
- gramofon Dual
- gramofon Soundmaster
- gramofon Prixton
- gramofon Denon
- gramofon Block
- gramofon Cambridge
- gramofon JVC
- gramofon Rega
- gramofon Auna
- gramofon Krüger&Matz
- gramofon Renkforce
- gramofon Thomson
- gramofon Pro-Ject
- gramofon AVM
- gramofon ELAC
- gramofon Numark
- gramofon Marantz
- gramofon Monster
- gramofon Esoteric
- gramofon Camry
- gramofon Lenoxx
- gramofon Revox
- gramofon Nevir
- gramofon Ibiza Sound
- gramofon Musical Fidelity
- gramofon ION
- gramofon NAD
- gramofon Audio-Technica
- gramofon GoGen
- gramofon Sonoro
- gramofon Aiwa
- gramofon AKAI
- gramofon Thorens
- gramofon Omnitronic
- gramofon Victrola
- gramofon Elta
- gramofon McIntosh
- gramofon Denver
- gramofon Gemini
- gramofon Trevi
- gramofon Technaxx
- gramofon Sencor
- gramofon Audizio
- gramofon House Of Marley
- gramofon Rekkord
- gramofon Reflexion
- gramofon EAT
- gramofon Crosley
- gramofon Reloop
- gramofon Fenton
- gramofon Speaka
- gramofon Music Hall
- gramofon Rotel
- gramofon Swan
- gramofon Argon
- gramofon American Audio
- gramofon Reflecta
- gramofon GPO
- gramofon Exibel
- gramofon Brigmton
- gramofon Sunstech
- gramofon Sylvania
- gramofon Envivo
- gramofon Bigben
- gramofon Sherwood
- gramofon Ricatech
- gramofon Nikkei
- gramofon Veho
- gramofon Roadstar
- gramofon Karcher Audio
- gramofon Linn
- gramofon Andover
- gramofon Mark Levinson
- gramofon Zolid
- gramofon Stanton
- gramofon Citronic
- gramofon JB Systems
- gramofon Jam Audio
- gramofon Ortofon
- gramofon FALLER
- gramofon Glorious
- gramofon Fleischmann
- gramofon Fluance
- gramofon Axxion
- gramofon Vintage Vinyl
- gramofon Roco
- gramofon Elipson
- gramofon Zedar
- gramofon Analogis
- gramofon Mixars
- gramofon Bauhn
- gramofon Ryght
- gramofon IMG Stageline
- gramofon M-Live
- gramofon Welling
- gramofon MoFi
Najnowsze instrukcje dla gramofon
15 Października 2024
14 Października 2024
14 Października 2024
13 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024