Instrukcja obsługi Pyle PSPVC6

Pyle głośnik PSPVC6

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PSPVC6 (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
6 Channel High Power Stereo Speaker Selector
PSPVC6
with Volume Control
www.PyleUSA.com
2
Read all documentations carefully before operating the equipment.
Retain this manual for future reference.
Congratulations for purchasing the PSPVC6 6 Channel High Power Stereo Speaker
Selector. It lets you connect up to six separate pairs of speakers to your stereo
receiver/amplier. The control center is especially convenient if you have speaker
sets in dierent rooms and want to turn them on and o independently. You can
enjoy the convenience and exibility of listening to multiple speaker pairs
simultaneously.
The control center lets you use one to six sets of speakers at a time, and is designed
to operate with a stereo receiver/amplier that has a maximum of 100 watts per
channel, and with speaker systems that have a minimum impedance of 8 ohms (see
" " on page 4)Impedance Chart
PREPARATIONS
• Use the PYLE PRO Speaker Selectors only with ampliers rated at 100 watts per
channel or less.
Your PYLE PRO Speaker Selector is designed to accept any size cable up to 14 gauge
non-terminated speaker wire. If you're using non-terminated speaker wire, do not
use any speaker wire that is larger than 14 gauge. The lower the gauge number, the
larger the cable (e.g., 12 gauge is larger in actual physical size than 14 gauge).
• Do not hook the outputs of one selector into the inputs of another speaker
selector together.
• Before you connect the AC power source, make sure you set ALL speakers ON/OFF
to OFF
• Left and right "commons" are isolated to work with all types of ampliers
Auto transformer impedance protection.
www.PyleUSA.com
3
OPERATION
1. Press button to turn all speaker pairs. Speakers ON/OFF Button: ON
Press button again turn .OFF
2. Press button to select amplier A and B.Amplier A/B Selector Button:
3. Volume Controls: Turn the control knob clockwise to increase the volume and
counter-clockwise to decrease or o.
4. Speaker Connections: The control center divides the power from your receiver/
amplier dierently to its speaker terminals. (This is especially noticeable when
you connect only one pair of speakers. If you connect more than one pair of speakers,
see " " on page 4 to selector the best terminals to connect.) Impedance Chart
For the best performance, make the connections based on how frequently you use
each set of speakers.
Cautions:
To avoid damaging your speakers or receiver/amplier:
Be sure your receiver/amplier's power is turned o before you make the
connections.
• Never let the speaker wire's bare ends touch each other or the adjacent terminals
on the control center.
• Do not connect more than one pair of sepakers to each set of terminals.
5. Amplier Connections: Connect the speaker output of your receiver or amplier
(100 watts max). lf you are using a second amplier, connect it to the B amp terminal.
Maximum Amplier input
• 100W RMS
• 150W AVG
Maximum Output per Speaker
• 18W RMS
• 50W AVG
• 100W PEAK
• 4 or 16 OHMS LOAD
Insert the speakers positive (+) wires in the positive terminals, and negative (-) wires
into the negative terminals, according to the respective L (left) and R (right) terminals.


Specyfikacje produktu

Marka: Pyle
Kategoria: głośnik
Model: PSPVC6

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PSPVC6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Pyle

Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
Pyle

Pyle PDIC61RD Instrukcja

30 Grudnia 2025
Pyle

Pyle PHSP6K Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIW67 Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC60 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLATV65BT Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC81RD Instrukcja

6 Grudnia 2024
Pyle

Pyle PDWR40W Instrukcja

6 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik