Instrukcja obsługi Pyle PPRE70BT

Pyle odbiornik PPRE70BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PPRE70BT (6 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Pro Audio Wireless BT STreaming
Preamplifier Receiver System
PPRE70BT
Digital Rack Mount Studio Preamp,
Recording Mode, FM Radio
www.PyleUSA.com
2
Safety Precaution
Read all documentations carefully before operating the equipment.
Retain this manual for future reference.
Follow all instructions printed on unit for proper operation.
Do not opern cover (or back cover) to reduce the risk of electric shock or re.
There are no User serviceable parts inside. Refere servcing to qualied service
personnel.
This symbol is used to alert the operator to the presence of important
operating instructions and precautions detailed in the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are
present within the products enclosure that may pose a risk of electric shock.
Warning:
To avoid re or risk of electric shock, do not expose this unit to rain or moisture.
Notes:
• Make sure power outlets conform to the power requirements listed on the back of
the unit.
• Main Voltage must be correct and the same as that printed on the rear of the unit.
• Do not use the unit if the electrical cord is frayed or broken.
• The unit shall not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, shall be placed on unit.
• The unit shall be connected to a mains socket outlet with a protective earth
ground connection.
• Do not use equipment if Power plug is damaged, smashed, bent or pinched.
Warning:
• Using, adjusting or changing program control beyond this specication may cause
dangerous radiation.
• The unit should be serviced by qualied service personnel.
• When repairing, use only same specication parts.
Notes:
• Select the voltage requirement by adjusting the voltage selector switch at the rear
panel.
• Make sure that the power of the equipment is o and disconnected from the main
voltage before switching the voltage selector to the required setting. We will not
be responsible for damages arising from the improper installation, wiring or
operation due to the fault or negligence of the user.
www.PyleUSA.com
3
Control & Layout Conguration
1. POWER SWITCH: Press to switch the power unit ON or OFF.
2. To connect with other music sources with 3.5mm Jack3.5MM INPUT 1:
3. To connect with headphonesHeadphone output:
4. XLR MIC INPUT: 1/4” /XLR combo jack for microphone
5. LEVEL CONTROL: For microphone level controls
6. Adjusts the bass frequency of main outputBASS:
7. Adjusts the mid frequency of main outputMID:
8. Adjusts the high frequency of main outputTREBLE:
9. Adjusts the balance of main outputBALANCE:
10. MASTER VOLUME: Adjusts the master volume of main output
11. USB DISPLAY SCREEN: To show the name of the songs from USB, song time
12. USD SLOT/SD CARD SLOT: USB slot capacity is up to 32G
13. TAPE MONITOR: Press this button to use ‘TAPE input/output from rear panel
sources only.
14. To choose dierent input sourcesINPUT SELECTOR:
15. MP3 CONTROL BUTTON PART:
• MODE: Press to select the USB/SD/FM/BT/Recording mode. The unit is set in
MP3 mode and only when you press “MODE” button to go to other mode.
• REPEAT: There are 3 types of Repeat and they will show on the screen, and you
can press this button to select the favorable repeat type, such as SINGLE/REPEAT
/RANDOM/ALL REPEAT. Press this button for more than 3 seconds, it will go to
Folder searching function, press Prev/Next buttons to go to the previous folder
or the next folder. Press REPEAT button again to exit FOLDER searching.
• PLAY: Press to start to play the tracks. When in RECORDING MODE, press this
button to start recording.
• PREVIOUS TRACK: Press to play the previous track from USB or SD card.
When in FM mode, it is for previous station.
• NEXT TRACK: Press to play the next track. When in FM mode, it is for next station.

Specyfikacje produktu

Marka: Pyle
Kategoria: odbiornik
Model: PPRE70BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PPRE70BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Pyle

Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Pyle

Pyle PLMRMBT5B Instrukcja

6 Grudnia 2024
Pyle

Pyle P3001AT Instrukcja

6 Grudnia 2024
Pyle

Pyle Pro PTAU23 Instrukcja

8 Października 2024
Pyle

Pyle PLAM2001D Instrukcja

2 Października 2024
Pyle

Pyle PT1100 Instrukcja

2 Października 2024
Pyle

Pyle PFA100 Instrukcja

2 Października 2024
Pyle

Pyle PDA35BT Instrukcja

2 Października 2024
Pyle

Pyle PLA2200 Instrukcja

30 Września 2024
Pyle

Pyle PHDA6BT Instrukcja

29 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025