Instrukcja obsługi Pyle PPHP87TLB

Pyle głośnik PPHP87TLB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PPHP87TLB (3 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Portable PA Speaker System Bundle Kit
with Built-in LED Lights, Rechargeable Batter
Wireless BT Streaming, Handheld Microphone
MP3/USB/Micro SD/FM Radio (8’ -inch, 360 W
PPHP87TLB
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However,there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines. This equipment should
be installed and operated with minimum distance of 20cm the radiator your body.
This device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter.
IMPORTANT SAFETY MEASURES
Before using this machine, please read all the safety and operating instructions.
Meanwhile, please observe all the indications about safe operating.
1. Be aware that the electric power supply Protection of electric power supply line:
line is not tramped, pressed by heavy objects. Pay special attention to the plug of
power supply line and outlet on the machine. DO NOT lengthen the electric shock,
DO NOT pull or drag or the power supply line.
2. Ventilation: This set must be put in ventilated place. put disk on it or clothDO NOT
to cover it. The distance away from the wall should not be less than 10 centimeters.
DO NOT put this set on the bed, sofa, carpet or other objects with similar surface
in case of good ventilation.
3. Casing Dismantling: DO NOT dismantle the casing. If one touches the inner
components, he will probably get serious electric shock.
4. When you discover unusual smell and smoke, cut power supplies Unusual smell:
immediately and pulls out the plus from the outlet on the wall.
Contact the sell shop or nearest repairing center.
PRODUCT FEATURES
1. High-Powered Active Speaker Tower
2. Hassle-Free, Quick Setup Audio & Vocal Projection
3. Multi-Colored LED Flashing DJ Party Lights
4. Connect & Stream Audio from External Devices
5. Impressive Bass Response
6. Mic Priority Control:
Automatic Vocal Talkover over Music
7. Aux (3.5mm) Input Jack
www.PyleUSA.com
2www.PyleUSA.com 3
What's in the Box:
PA Speaker System
Remote Control
Power Adapter
Wireless Microphone
www.PyleUSA.com
4www.PyleUSA.com 5
GETTING STARTED
1. Ensure the Portable PA Speaker is turned o. Ensure all volume controls are turned
all the way down. Next, connect one side of the included power cable to the
Portable PA Speakers power inlet and the other to a grounded power outlet.
2. Ensure that the power supply complies with the power requirements listed on the
identication sticker located on the bottom of your product. Turn on the power to
the Portable PA Speaker using the power switch.
3. Slowly turn up the function keys until the desired level is reached.
WIRELESS BT CONNECTION
Switch the Portable PA Speaker to , then switch to (BT MODE) pairing MODE BT
mode and connect to a new BT device using BT Network Name: PYLE USA.
Warning: To prevent the risk of re or electric shock, do not expose this appliance to
rain or moisture. To prevent electric shock do not remove the cover. No user serviceable
parts inside. Refer servicing to qualied service personnel.
Safety: Prior to connecting mains, ensure that the supply voltage is correct and the
mains lead is in good condition. Avoid ingress of water or particles into the enclosure.
Placement: Keep the unit out of direct sunlight and away from heat sources.
Place the unit in an upright position during use and storage. Keep the unit away
from moisture or dusty environments.
Cleaning: Use a soft cloth with a neutral detergent to clean the cabinet, panel and
controls. To avoid damage, do not use solvents to clean this equipment.
REMOTE CONTROL FUNCTIONS
UNIT DESCRIPTION
1. DC 5V charging portDC 5V:
2. USB port
3. Micro SD port
4. AUX: Aux input
5. Mic inputMIC-IN:
6. GUITAR-IN: Guitar input
7. Mic volume knobMIC VOL:
8. Echo volume eect for micECHO VOL:
9. VOLUME: Volume knob
10. /M: Press and hold to power on/o, Mode Switch for BTFMAUXUSBMICRO SD
11. Choose from EQ1 EQ2 EQ3 EQ4...EQ: , , ,
12. Press once for Wireless BT mode/press and hold to disconnect Wireless BT.:
13. /LED. SW: Previous song/channel/press and hold to turn on/o LED light
14. Play/stop. Press and hold to auto-search FM channel.:
Press and hold in BT mode to turn on TWS.
15. Next song/next channel/press and hold for mic priority/MIC. PRI:
1. Standby button.Power:
2. Used to switch the BT, FM, AUX, USB, SDMODE:
3. Mute buttonMUTE:
4. Recording, press once to start recording,REC:
press again to play the current recording.
5. Main volume increaseVOL + :
6. Next song/Next channel :
7. Previous song/Previous channel :
8. Play/Stop Auto-search by press and hold :
the FM button, press and hold the BT button to
turn on TWS
9. Main volume decreaseVOL - :
10. REPEAT: Single repeat/repeat all
11. Choose from EQ1 EQ2 EQ3 EQ4...EQ: , , ,
12. Choose song number directly/channel directly.
12 3 456
78
9
10 11 12 13 14 15


Specyfikacje produktu

Marka: Pyle
Kategoria: głośnik
Model: PPHP87TLB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PPHP87TLB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Pyle

Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024
Pyle

Pyle PPHP849KT Instrukcja

12 Października 2024
Pyle

Pyle PLMR60W Instrukcja

9 Października 2024
Pyle

Pyle PDWR50B Instrukcja

7 Października 2024
Pyle

Pyle PPHP26JBL Instrukcja

7 Października 2024
Pyle

Pyle PPHP8496BG Instrukcja

7 Października 2024
Pyle

Pyle PPHP8496 Instrukcja

7 Października 2024
Pyle

Pyle PPHP868STBG Instrukcja

6 Października 2024
Pyle

Pyle PDWR40B Instrukcja

6 Października 2024
Pyle

Pyle PDJ28WM Instrukcja

6 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Yamaha

Yamaha CBR12 Instrukcja

13 Października 2024