Instrukcja obsługi Pyle PPHP123M

Pyle Speaker PPHP123M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PPHP123M (8 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
USER’S MANUAL
PPHP121 PPHP151
PPHP120A PPHP150A
PPHP123M PPHP153M
www.pyleaudio.com
1
Before using your new Speaker System Please review the
following instructions, for the safety and investment.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum
level. On the contrary the system could damage
1. - Plug the power cable to the Ac outlet and to the system and to the speaker
2. - Plug the Microphone in the “MIC” input
3.- Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input
4.- Turn on the systems. A green LED will light up to indicate the speaker is on
5.- Set the volume on the low level on the MIC and the LINE IN input
6.- Increase the master volume (place on the right side of LINE OUT* connector)
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED will light up when the system detects overload power. You will must decrease
the volume.
CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will
damage the system
EXTRA FUNCTIONS
6.3 and canon connectors marked as LINE OUT can handle an amplifier or even another
powered speaker cabinet ,in cascade. On the bottom of the speaker there is a hole to place
a stand.
2
FEATURES:
PPHP121: 12” 800 Watt 2 Way Plastic Molded Speaker Cabinet
 ·12'' Woofer
 · 1.4'' Titanium Compression Driver
· 1 /4” and Speakon Jacks input
 · Frequency response: 50-20 KHz
 · Power: 800 Watts
 · Impedance: 8 ohm
 · Crossover Frequency: 3.5K Hz
 · 35mm Speaker Stand Mount
 ·Dimensions: W16.6” x D12.8” x H 23.5”
PPHP120A: 12 800 Watt Powered 2 Way Plastic Molded Speaker Cabinet
 ·12" Woofer
 ·1.4" Titanium Compression Driver
 ·XLR and 1/4" Mic Inputs
 · XLR Stereo RCA Line Input
 · XLR and 1/4" Line Outputs
 · Master Volume, Bass Treble Controls
 · Frequency response: 50-20 KHz
 · Power Output: 800 Watts
 · Crossover Frequency: 3.5K Hz
 · 35mm Speaker Stand Mount
 · 110/220 Voltage Selectable
 · Dimensions: W16.6” x D12.8” x H 23.5”
PPHP123M: 12” 800 Watt Powered 2 Way Plastic Molded Speaker Cabinet w/Built in
MP3
 · 12" Woofer
 · 1.4" Titanium Compression Driver
· USB Terminal
 · MP3 control with LCD display
 · XLR and 1/4" Mic Inputs
 · XLR Stereo RCA Line Input
 · XLR and 1/4" Line Outputs
 · Master Volume, Bass Treble Controls
 · Frequency response: 50-20 KHz
 · Power Output: 800 Watts
 · Crossover Frequency: 3.5K Hz
 · 35mm Speaker Stand Mount
 · 110/220 Voltage Selectable
 · Dimensions: W16.6” x D12.8 x H 23.5”

Specyfikacje produktu

Marka: Pyle
Kategoria: Speaker
Model: PPHP123M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PPHP123M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Pyle

Pyle

Pyle PRETRAMP50 Instrukcja

25 Września 2024
Pyle

Pyle PSUFM826LED Instrukcja

12 Września 2024
Pyle

Pyle PBMSPG15 Instrukcja

11 Września 2024
Pyle

Pyle PLSMRW64WT Instrukcja

7 Września 2024
Pyle

Pyle PL6150BK Instrukcja

7 Września 2024
Pyle

Pyle PPHP123M Instrukcja

5 Września 2024
Pyle

Pyle AZPWPBTA70OR Instrukcja

4 Września 2024
Pyle

Pyle PWMA850UFM Instrukcja

4 Września 2024
Pyle

Pyle PBMSPG1BK Instrukcja

3 Września 2024

Instrukcje Speaker

Najnowsze instrukcje dla Speaker