Instrukcja obsługi Pyle PLUTV65BTR

Pyle głośnik PLUTV65BTR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLUTV65BTR (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
5
What’s in the Box:
(1) 6.5'' Amplied Main Speaker
(1) 6.5'' Passive Support Speaker
(2) Butt Connectors, 16-22 AWG
(2) 3” Aluminum Mounting Brackets (Pre-Installed on Speakers)
(4) 3.15” x 1.2” x 0.2”Inches Rubber Pads
(4) 3.15” x 1.2” x 0.08”Inches Rubber Pads
(4) M8 x 55mm Hexagon Socket Head Cap Screws
(4) M8 x 35mm Hexagon Socket Head Cap Screws (Pre-Installed)
(1) Power Wire Harness
(1) RGB Connection Wire, 6.6’ ft.
(1) Remote Control
Marine/PowerSports Tower Technical Specs:
Speaker Power: 1200 Watt MAX
Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
Amp Type: 2-Channel, Class D
Marine Grade Waterproof Rating: IP-X6
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Impedance: 4 Ohm
Magnet Type: 32 oz. Circuit
Mid-Woofer Voice Coil Type: 1'', TIL
Sensitivity: 92 dB +/- 2 dB @ 1M/1W
Anti-Thump Turn-On
Soft Turn On/O
T.H.D: <0.05%
S/N Ratio: >80dB
Channel Separation: >65dB
Fuse: 1 x 15A
Power Supply: DC 12V
Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.75’ ~ 3.0’inches
1.75”~2” for Motorsports/Powersports Application.
2.25”~3” for Marine Application.
Speaker Dimensions: 8.1’ x 8.9’ x 10.5’ -inches, with Bracket (-Each)
www.PyleUSA.com
PLUTV65BTR Installation
Speaker Mounting suggestion as below:
Step 1: Removing the top half of clamp
Put the PLUTV65BTR speaker in a safe place.
Using the 1/4” Hex key, remove the top clamp bolts.
Step2/3: To adjust mounting clamp angle and speaker position
Diagram A is to show there are four round pins underneath the bottom
base of aluminum die cast clamp, which can be inserted and xed to four
round notch holes on top of plastic cabinet as diagram B shows by every
45 degrees adjustment either at clockwise or counter clockwise direction.
Through such design, user can change the angle of swivel clamp, use the
5/16” hex key to loose the center screw a little bit and lift the bottom clamp
to twist speaker angle by every 45 degrees to get the optimal angle you
want. Then re-making sure the pins on base of bottom clamp are inserted
and sits on notch holes on top of plastic cabinet at and seamlessly.
Then re-tighten the center hex screw to secure the bottom clamp strongly.
Step 4: Securing clamp bolts
Using the correct rubber pads (labeled for O.D.) install on both top and
bottom half of clamps. 3.15” x 1.2” x 0.2” rubber pads for 1.75” O.D. 3.15” x
1.2” x 0.08” rubber pads for 2” - 3” O.D. Using the 1/4” Hex bit socket hand
tighten the bolts evenly (both sides should have the same spacing
between bolts).
Step 5: Option for adjustable PYLE logo---Unbolt the screws rst, adjust the logo
direction, then re-x screws.
2
www.PyleUSA.com
PLUTV65BTR Wiring
1. Connect the RCA plugs (red/white) to an external amplier for audio output.
2. Connect the ACC wire (red) to the accessory power of the vehicle as ON/OFF
switch of the speakers.
3. Connect the remote out wire (blue) to an external amplier as ON/OFF switch
of the amplier.
Remote Control
3
www.PyleUSA.com
Remote Control Functions
10 static colors for choose with 8 kind of brightness which can be adjusted up &
down.
3 colors ash, 4 colors strobe, 7 colors fade, 7 colors smooth, all modes can
adjust the brightness and speed.
In static color mode, the brightness up and down.can be adjusted
6 kinds of EQ mode.
Features:
Pro Audio PowerSport Speakers with RGB Lights
Amplied (Active) Speaker System
Wireless BT Music Streaming Ability
Bridged Sound System: (2) x 6.5'' Woofers + (2) x 1'' Tweeters
Marine Grade Rated Construction
Weatherproof & Water-Resistant Housing
2-Way Full Range Stereo Sound Reproduction
Built-in Digital Sound Processing Amplier
Integrated Speaker Power & Wiring Harness
Compact Size & High-Powered Output
Impressive Bass Response
Aux (3.5mm) Input Jack
Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/Full-Range Amplier
Connect & Stream Audio from External Devices
Sleek Design, Machine Molded Speaker Cabinet Housing
Rugged, Universal Mount Bracket Design for Roll-Bar/Roll-Cage
Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
BT Connectivity:
Simple & Hassle-Free Pairing
Instant Wireless Audio Streaming Ability
Works with All of Todays Latest Devices (Smartphones, Tablets, Laptops, etc.)
BT Version: V5.0
BT Network Name: ‘PyleUSA
Wireless Range: 30+ ft.
*BT Receiver Module Built-Into Amplier of Main / Active Speaker
4
www.PyleUSA.com
12V wire harness connection
LED wire
LED wire
Black -
Gray +
AUX input
(2)
ACC wire
(red)
(1)
Audio output
(3)
Remote out
wire (blue)
Ground wire
(black)
Battery wire
(yellow)
DC12 (-) grounded to
metal chassis, or directly
to negative polarity of battery
DC12 (+) extention
power cable with fuse
holder (not included)
POWER OFF/ON
FLASH
STROBE
FADE
SMOOTH
STATIC COLOR CHOICE
BRIGHTNESS &
SPEED UP/ D WNO
NO ALRM
J ZAZ
POP
CO TRYUN
ROCK
CLASSIC


Specyfikacje produktu

Marka: Pyle
Kategoria: głośnik
Model: PLUTV65BTR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PLUTV65BTR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Pyle

Pyle

Pyle PLMR62 Instrukcja

28 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
Pyle

Pyle PDIC61RD Instrukcja

30 Grudnia 2025
Pyle

Pyle PHSP6K Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIW67 Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC60 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLATV65BT Instrukcja

6 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik