Instrukcja obsługi Pyle PLEDFSP18

Pyle głośnik PLEDFSP18

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLEDFSP18 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Technical Parameters
Applicable For
Since buying date, the user enjoys one year free repair
services under normal use. After one year, will be charged
according to each component part cost.
• In case change component part,will be charged
according to our company's component part cost list.
• The following situations without free repair services in
warranty period
1. Damage caused by natural earthquake, rare disaster
and abnormal use.
2. Damage caused by transportation, fall, and unproper
storage.
3. Consumable component such as spare parts, batteries,
light bulbs, etc.
4. Warranty Information record is not complete, no
purchase date, no buying shop seal, etc.
5. Featured using environment, such as humidity, sulfuric
area, high salty and on board, easy corrion area, etc.
6. Using not according to the instructions.
7. Special Oer
• When returning to factory for repairs, the user should
make sure the product is packed properly to avoid any
damage during transportation.
• Factory is not responsible for the damages caused by the
unproper disassemble.
Bluelooth
Version V4.2 Distortion
Rate 10%
Bluelooth
Name A1 SNR 75dB
Bluelooth
Transmission
Distance
Power
Supply 5V 1A10M
Output
Power 5W
Built-in High
Eciency
Lithium Battery 7.4V 2000mA
Horn
Parameters
Φ 52MM
4Ω5W
Product
Dimension
Φ98MM*
165mm
Attention
In order to use the speaker correctly and ensure the good
performance of the speaker, please read carefully and
observe below instructions.
• Please do not impact the mainframe seriously
• Please do not contact benzene, diluent and other chemicals
• Please do not use close to a magnetic and electric eld
• Please avoid using in direct lighting and heating appliances
• Please do not repair or disassemble.
www.PyleUSA.comwww.PyleUSA.com
Flame Atmosphere Lamp
Bluetooth Speaker
Operation Method
Single Bluetoolh Speaker Operation: When the Blueloolh
speaker is turned on, you will hear "DI" sound, and the Led
light ashes. Search the device name "A1" in your bluetooth
device. Once connected successfully, you will hear the sound
"DI", and the white led lights steadily.
Double Bluetoolh Speaker Operation:If using 2 Bluetooth
speakers, turn on the two Bluetooth speakers, the white led
light ashes. Short press ON/OFF button on the one of
the Bluetooth speaker. When the two Bluetooth speakers are
connected, the two speakers will promt a “DIDI” warning
tone. One of the speakers lamp will be lit after successful
connection, the Led lights steadily (right channel), the main
lamp on the other speakers Led light ashes (left channel).
Search the device name "A1" with device Bluetoolh speaker.
Once connected successfully, you will hear the sound "DI",
and the white led lights steadily. Press any button on the two
Bluatooth speakers. The functions are the same, like volume
+/-, prev song, next song and play button. (Notice:If turned
on and one bluetooth speaker is connected to the device
successfully, if you want to turn on the other one, short press
ON/OFF button on the rst one, the two speakers will
promt a warning tone "DIDI" at the same time. The two
speakers will not work at the same time by doing only a short
press because it is not connected.
Bluetooth Speaker Mode
ON/OFF Button: Long press this button for 2 seconds to
turn ON/OFF the Bluetooth speaker; short press button to
connect with the other Bluetooth speaker; Led light
ashes means Bluetooth is turned on, steady light means
Bluetooth connection successful.
: in Bluetooth mode, quick pressing this Next song/V+ key
key to skip to the next song, long press to increase the
volume (when reaching the maximum volume, the
speaker will say "di di"), (press together to cancel + -
pairing)
Product Information
• Easy to use button control.
• When using both two Bluetooth speakers, the left and right
channels can be separated. The stereo output creates
perfect sound.
Notice: When using a single Bluetooth speaker, the left and
right channels will be combined to output.
• Bluetooth Speaker Function
• White led light ashes, shows Bluetoolh speaker is ON.
White led lights steadily shows Bluetooth speaker
successfully connected.
• When charging, the red light shows. When the red light goes
o, it indicates the lamp is fully charged.
Installation Instructions
Last song/V- Key: In Bluetooth mode pressing quickly will
skip to the last song, long press to decrease the volume
(when reaching the maximum volume, the speaker will
say "di di"), (press together to cancel pairing)+ -
Play/Pause Key: Quick press to play/pause, long press is
invalid
Flame Atmosphere Lamp ON/OFF key: quick press to
turn ON/OFF the lamp; long press invalid
Charging Instructions:
Attention
• Please do not charge the lamp under the temperature of
32°F-104°F.
• Avoid charging while using the device.
• Please pull-out the usb cable when fully charged
• Do not charge the lamp in high humidity situation.
Power Input
• Connect the USB cable into the lamp, when charging the
indicator is red, if fully charged the indicator turns o.
Tripod
Warning:
The tripod is not part
of the accessories, and
to be ordered separately
Standard tripod threaded hole
www.PyleUSA.com

Specyfikacje produktu

Marka: Pyle
Kategoria: głośnik
Model: PLEDFSP18

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PLEDFSP18, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Pyle

Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
Pyle

Pyle Cycle PLMCA40 Instrukcja

3 Stycznia 2025
Pyle

Pyle PDIC61RD Instrukcja

30 Grudnia 2025
Pyle

Pyle PDIC1681RD Instrukcja

6 Grudnia 2024
Pyle

Pyle PHSP6K Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIW67 Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC60 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLATV65BT Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC81RD Instrukcja

6 Grudnia 2024
Pyle

Pyle PDWR40W Instrukcja

6 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch PIC-525-T-SC Instrukcja

15 Stycznia 2025