Instrukcja obsługi Pyle PLCMTR92


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLCMTR92 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
Commercial Grade Safety Camera & Video System
PLCMTR92
USER MANUAL
www.PyleUSA.com
PLCMTR - Commercial Grade Camera System
Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
To ensure your safety, the driver should not watch videos or operate features on the
monitor while driving. There are no serviceable parts in this unit, do not disassemble or try to
repair this unit. If the unit malfunctions please return to your vendor or send to a Pyle repair
facility. Please observe and obey the local laws and regulations when installing the unit.
Upon Installation, please make sure as to not to interfere with any of the vehicle's safety
features, wiring, components, etc. We are not responsible for any damages, injury,
malfunctions or otherwise noted due to faulty or non-professional installation.
Connection
Connect the camera's threaded locking 4-pin cable connectors into the female receiving
connection of the included 4-pin extension cable. The extension cable then connect to
your compatible video monitors with 4-pin receiving connector. The threaded locking
cable connectors of the camera serve to provide power and video for the camera.
Please remember to disconnect your vehicle's battery prior to any connection / installation.
Use the included wiring harness to provide power and video signals to your monitor.
There are colored wires to assist in the video camera system setup.
See the wiring diagram for connections between cameras, monitor and your vehicle
When turning the vehicle's ignition key or turning to the accessory or ON
position, power is supplied to the camera system through the control box and
the monitor will be in stand-by mode.
2
www.PyleUSA.com
PLCMTR - Commercial Grade Camera System
Wiring & Connection Camera
(4-Pin Connection)
Red: Power 12/24V
Black: GND
Green: +12V Reverse
*For additional information visit www.PyleAudio.com
Video
Connectors
Display Monitor
Power &Video
Wiring Harness
POWER: DC 12V
GND
+12V Reverse
*When the Green - Reverse Trigger - is connected, the
system will automatically revert to this connection
once the vehicle is placed into reverse gear. This is
connected to the camera via 4-Pin connection.
*The monitor control allow the user
to adjust picture settings horizontal
or vertical based on the mounting
location of the camera.
*Please note: The monitor may
include a 'volume' function in the
menu settings. This feature is not
available for this model.
3


Specyfikacje produktu

Marka: Pyle
Kategoria: Niesklasyfikowane
Model: PLCMTR92

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PLCMTR92, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Pyle

Pyle

Pyle PDWM2950 Instrukcja

12 Stycznia 2025
Pyle

Pyle PVCLG85 Instrukcja

9 Stycznia 2025
Pyle

Pyle PDWR61BT Instrukcja

9 Stycznia 2025
Pyle

Pyle PSCBLKIT22 Instrukcja

1 Stycznia 2025
Pyle

Pyle PKST44W Instrukcja

6 Grudnia 2024
Pyle

Pyle PL2DN105 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLCAPE50 Instrukcja

9 Października 2024
Pyle

Pyle PLCAPE60 Instrukcja

9 Października 2024
Pyle

Pyle PLCAPE32 Instrukcja

9 Października 2024
Pyle

Pyle PYG60 Instrukcja

7 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane