Instrukcja obsługi Pyle PLCDBT85MRW

Pyle głośnik PLCDBT85MRW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLCDBT85MRW (14 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
MOBILE AUDIO SYSTEM
USER MANUAL
PLCDBT85MRW
• PLL Synthesizer Stereo Radio
• CD/MP3/WMA Player
• Automatic Memory Storing
• Fixed Panel
• Bluetooth function
• Preset Equalization
• Electronic Shockproof (ESP) Function
• USB/SD Interface
2
CONTENTS
Installation ............................................. 3
Take out screw before installation ......... 3
DIN Front-Mount ................................. 3
Installing the unit ............................... 3
Removing the unit ............................. 4
Wiring Connection 5 ................................
Operation .............................................. 6
Location of keys .................................... 6
Switching on/off the unit ........................ 7
Sound adjustment ................................. 7
EQ function ........................................... 7
Display information ............................... 7
Liquid crystal display ............................. 7
Reset function ....................................... 7
Radio operation 7 ....................................
Switching to radio mode .................... 7
Selecting the frequency band ............ 7
Selecting station ................................ 7
Automatic memory storing&
program scanning ............................ 8
Manually Store Station & Recall Preset
Station .8 ……………………………………
CD/MP3/WMA operation ................... 8
Switching to CD mode ....................... 8
Selecting tracks ................................. 8
Pausing playing ................................. 8
Previewing all tracks .......................... 8
Repeating the same track ................. 8
Playing all tracks in random .............. 8
Ejecting a disc ....................................... 8
Selecting Directory Up own /D ............ 8
Selecting Tracks AS/PS /SC by H……8
DISPLAY INFORMATION .................. 9
USB play operation ........................... 9
SD operation ..................................... 9
Disc notes ..........................................10
Bluetooth Operation ..........................11
Remote Control Handset ................... 12
Specication ...................................... 13
Trouble shooting ................................ 14
3
INSTALLATION
Notes:
Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
Before nally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the
unit and the system work properly.
Use only the parts included with the
unit to ensure proper installation. The
use of unauthorized parts can cause
malfunctions.
Consult with your nearest dealer if
installation requires the drilling of holes
or other modications of the vehicle.
Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
If installation angel exceeds 30°from
horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT-MOUNT
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below:
Installing the unit
Be sure you test all connections rst, and
then follow these steps to install the unit.
Make sure the ignition is turned o, and
then disconnect the cable from the
vehicle battery’s negative (-) terminal.
Disconnect the wire harness and the
antenna.
Mount the sleeve by inserting the
sleeve into the opening of the
dashboard and bend open the tabs
located around the sleeve with a
screwdriver. Not all tabs will be able to
make contact, so examine which ones
will be most effective. Bending open the
appropriate tabs behind the dashboard
to secure the sleeve in place.
Tabs
Screwdriver
Sleeve
Dashboard
Reconnect the wire harness and the
antenna and be careful not to pinch any
wires or cables.
Slide the unit into the sleeve until it
locks into place.
To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap
to the mounting bolt on the back of the
unit. If necessary, bend the metal strap
to fit your vehicle’s mounting area. Then
use the supplied hardware (Tapping
30
53mm
182mm

Specyfikacje produktu

Marka: Pyle
Kategoria: głośnik
Model: PLCDBT85MRW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PLCDBT85MRW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Pyle

Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
Pyle

Pyle Cycle PLMCA40 Instrukcja

3 Stycznia 2025
Pyle

Pyle PDIC61RD Instrukcja

30 Grudnia 2025
Pyle

Pyle PDIC1681RD Instrukcja

6 Grudnia 2024
Pyle

Pyle PHSP6K Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIW67 Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC60 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLATV65BT Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC81RD Instrukcja

6 Grudnia 2024
Pyle

Pyle PDWR40W Instrukcja

6 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch PIC-525-T-SC Instrukcja

15 Stycznia 2025