Instrukcja obsługi Pyle PKEQ48

Pyle Niesklasyfikowane PKEQ48

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PKEQ48 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
USE GUIDE AN WARR TY INFORMA ONR D AN TIwww.jamaudio.com
HX-P710
Where There’s A Jam, There’s Party! A ™
READ UP. PARTY DOWN.
HEY. HAVE WE SEEN YOU HERE BEFORE? PACKAGE CONTENTS
Register your speaker at www.jamaudio.com. Information
about where you bought them and how you’re using them is
like gold for the people who make these speakers. Do them
a solid, will ya?
Por manual de instrucciones e información de garantía
en español visítenos en www.jamaudio.com
There are lots of cool Jam speakers. Check them all out at
www.jamaudio.com
User Manual
Charging Cord Speaker
VOLUME +
VOLUME -
Language
Selector Pin
LANGUAGE SELECTOR PIN
JUST CHARGE IT
CONTROL YOUR DESTINY... OR AT LEAST YOUR SPEAKER
BLUETOOTH® CONNECT
ALLOW US TO SHED SOME LIGHT HOOKING UP OLD SCHOOL AUDIO, JACK
HELLO? SPEAKERPHONE? YES!
1. The cord that came with the
speaker—the one with the USB
on one end and the Micro USB
on the other—will work with
your computer.
2. If you want to use the wall outlet,
you’ll need to pick up a power
cord with a Micro USB the next
time you’re at the store, or use
any USB AC adapter, including
the one for your cell.
Now go get ready for an epic night while your speaker does
too. It needs about 3 hours of me time to be fully charged for
8 hours of party time.
Charging the speaker is so easy you’ve
probably figured it out by now, but just in
case, you’ve got two options: your computer
or a wall outlet.
VO LU ME +
VOLUME -
VO LU ME +
VOLUME -
1. That’s the power button, press and
hold for 5 seconds to power on
2. Push it to play, push it again to pause
3. That light lets you know when
Bluetooth has the hook-up
4. Skip back a track or jam on
to the next song
5. Turn the music up
6. Carabiner
CHARGE
AUX
9
10 11
2
7
8
4
4
56
1
3
12
7. Check out how much juice is in
the battery
8. Turn the music down (Wait, why
do you need to turn it down?)
9. It speaks too. Toggle between
languages here
10. The power cord goes here
11. Hook it up old-school
12. Language Selector Pin
Like any amazing couple, this one starts with a
connection—one between your device and the speaker’s
Bluetooth.
Here’s how it works:
1. We know you’re probably going to think, “derp” with this
one, but we have to say it: Make sure the smartphone,
tablet or computer you want to hook up to the speaker
has . (There. We got that out of the way.)Bluetooth
2. Turn on the speaker and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
(We don’t know what you’re using. We’re not spies.)
4. Look for Jam Street in your device’s list or click Bluetooth
YES—whatever pops up on your device—and BAM!
you’re connected.
5. Now hit PLAY on your speaker and crank it up—or down
if you’re lame.
You’re probably only going to have to do this once, unless
your device goes through a major
I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth will find each other every time just as long as the
speaker is set to and your device’s is, Bluetooth Bluetooth
you know—on.
If you’re connecting to a computer, you may have some
extra steps on that end. You’ll have to get that information
from the computer company.
Depending on your device you may be prompted to enter a
pairing code. If prompted enter “0000” as the code.
Press and hold PLAY/PAUSE for 5 seconds to activate
pairing mode.
Note: If you turn on your Jam Street but haven’t started the
party yet, it will automatically power off after 2 minutes of
unpaired inactivity.
Note: Once you've paired, if you pause the party for 15
minutes or more the Jam Street will automatically shut off to
preserve battery power.
Flashing Red
Wha It Looks Liket
CHARGE
What It Means
Lo Batteryw
RED (when plugged in) ar gCh gin
LED OF (ful charged) Ready to PartyF ly
Quic Flas BLUE Pairing Modek h
Slo F sh BLUE C nectedw la on
RED Line-in Mode
1. Plug one end of the cord into the speaker and the other
into the headphone jack on your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up—or down if
you’re lame.
You’ll have to play and pause the music from your device,
not your speaker. No problem. You’re there anyway, right?
3. If you’d rather not talk, hold down the PLAY/PAUSE
button on your Street for three seconds to ignore the call.
THE COOLEST PART: The Street knows when a call is
coming in and pauses the music before ringing. When you
hang up, the music starts where it left off—and so does the
party. If it’s you making the call, just start dialing from your
phone, and the Street automatically does its hands-free thing.
Isn’t it refreshing to know your speaker totally gets you?
When friends call asking to join the party—and you know
they will—answer the phone without disconnecting from
your JAM Street. Yes, that’s right. Your speaker is a
speakerphone too. How amazing is that?
Here’s how it works:
1. Make sure your phone and speaker are connected
through and not on a “break.”Bluetooth
2. Answering and ending a call works the same way: simply
click the PLAY/PAUSE button on your Street.
THE VOICE FROM WITHIN
When your JAM Street isn’t rocking out, it can tell you all
sorts of things it’s doing: when it’s powering on, ready to
pair, paired, ignoring a call, ending a call, charging and
powering off.
Just like the global gadget it is, your speaker toggles
between several languages or no language at all. Your
speaker can parlay with you in English, Spanish, French, or
Portugese. But, making the change is as simple as poking
the included Language Selector Pin, a paperclip, safety pin
or other thin object (is there another one?) into the small hole
on the bottom. Click through until the speaker starts
speaking your language.
LITTLE BIT OF WATER? NO WORRIES. COMING CLEAN
STUFF THE GOVERNMENT MAKES US SAY
ONE YEAR LIMITED WARRANTY STUFF OUR LAWYERS MAKE US SAY
A MESSAGE FROM THE ENVIRONMENT
The smart folks who made this speaker designed it to keep
the party going through just about anything, even water.
(They call it IPX4.) But those designers aren’t miracle
workers. Doing something like sending your speaker for a
swim in the deep end will fill those holes you need for
incredible sound with water—and that’s just not gong to
bode well for anyone or anything. Also, remember to keep
the back flap flush with the speaker for the best protection.
A soft, dry towel is all you need to clean off your speaker.
Using water, harsh cleaners or anything else only starts
messing with the mechanics inside. So, yeah, don’t do it.
FCC Disclaimer:
Note: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by
HMDX could void the user's authority to operate this
equipment.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
For detailed Warranty Instructions and Information visit:
http://www.jamaudio.com/customer-support/warranty-1yr
To obtain warranty service on your Jam product, contact a
Consumer Relations Representative by telephone at
1-888-802-0040 or email cservice@jamaudio.com for
assistance. Please make sure to have the model number of
the product available. Representatives are available 8:30am -
7:00pm EST Monday-Friday.
• Use this product only for its intended use as described in
this manual. Do not use attachments not recommended
by HMDX.
• HMDX is not liable for any damage caused to
Smartphones, iPod/MP3 player or any other device.
• Do not place or store this product where it can fall or be
dropped into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord,
plug, cable or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet
from water or cleaning solvents.
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Do not place speakers too close to ears.
May cause damage to ear drums, especially in young
children.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should
always be followed, including the following:
WARNING:
This product has an internal, non-replaceable lithium battery.
Please dispose in accordance with your local, state, province
and country guidelines.
This product contains small parts that may present a
choking hazard for young children.
CAUTION: All servicing of this product must be performed by
authorized Jam Audio Service Personnel only
Follow JamAudio on Facebook, Twitter, Spotify & Soundcloud
to feed your Jam with weekly playlists of hot new music.
© 2014 HMDX. All Rights Reserved.
IB-HXP710
Por manual de instrucciones e información de garantía
en español visítenos en www.jamaudio.com
Note: The most up-to-date version of the Jam Street User
Guide can always be found at www.jamaudio.com

Specyfikacje produktu

Marka: Pyle
Kategoria: Niesklasyfikowane
Model: PKEQ48

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PKEQ48, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Pyle

Pyle

Pyle PLCAPE50 Instrukcja

9 Października 2024
Pyle

Pyle PLCAPE60 Instrukcja

9 Października 2024
Pyle

Pyle PLCAPE32 Instrukcja

9 Października 2024
Pyle

Pyle PYG60 Instrukcja

7 Października 2024
Pyle

Pyle PSIP24 Instrukcja

7 Października 2024
Pyle

Pyle PSIB27X2 Instrukcja

29 Września 2024
Pyle

Pyle PLCMTRDVR47 Instrukcja

28 Września 2024
Pyle

Pyle PVTC320U Instrukcja

27 Września 2024
Pyle

Pyle PRMC700 Instrukcja

21 Września 2024
Pyle

Pyle PLDHR924 Instrukcja

19 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024