Instrukcja obsługi Pyle PHQBS62

Pyle głośnik PHQBS62

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PHQBS62 (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
1'' Silk Dome Tweeter
and Aluminum Voice Coils, Pair
www.PyleUSA.com
2
To ensure you will be completely satised with this product, read and
understand this manual carefully before use. Keep the manual in a safe place.
The Operating Manual must be passed on to all subsequent users.
IMPORTANT SAFETY PRECAUTIONS
• Make sure to match your speaker and amplier power ratings.
Failure to do so can result in pennanent damage to your speakers.
• Distortion is an indication that amplier or speaker is operating beyond its
design limits. If you hear distortion, immediately turn down the volume to
avoid permanent damage.
• Do not place these speakers on an unstable cart, stand, bracket or table.
The speaker may fall, causing serious injury to a child or adult and serious
damage to the unit.
• Do not use these speakers near water; for example, near a bathtub, sink, in a
wet basement, or near a swimming pool.
The speakers should be situated away from heat sources such as radiators, heat
registers, stoves, or other devices that produce heal.
• Clean only with a soft damp cloth.
CONNECTING THE SPEAKERS
These speakers are passive and thus require an amplier or receiver to give them
power. They can be connected to any 4 or 8 ohm amplier.
When using the 4 ohm model, you can Home Theater Bookshelf Speakers
connect one speaker per amp channel. When using the 8 ohm model, you can
connect up to 2 speakers per channel as long as your amp is 4 to 8 ohm capable.
If your speakers are relatively close to the signal source (50 feet or less), 16 gauge
wire can be used. For longer distances, 12 or 14 gauge wire is recommended.
Be sure to observe proper polarity by ensuring that the wire from the red speaker
terminal is connected to the red or positive terminal of the signal source and that
the wire from the black speaker terminal is connected to the black or negative
terminal of the signal source.
www.PyleUSA.com 3
FEATURES
• Audiophile-Grade Black Painted Paper Woofer Cone
• Ultra-Stiff Polypropylene Dust Cap on Woofer
• Rubber Surrounds on Woofer
• Silk Dome Tweeter gives Crisp and Realistic Sounding Highs
• Gold-Plated 5-Way Binding Post Terminals can Accept Banana, Bare Wire,
Spade Terminals and more
• Detachable Grill
• 1'' Aluminum Voice Coil
What's in the Box:
• Main Speakers
The Home Theater Bookshelf Speakers features
5-way binding posts which can accept various
types of connections:
1. Banana plugs can be inserted into the open end
of the binding post.
2. Spade tenninals can be placed around the metal
post and clamped by the screw down cap.
3. Looped wire can be wrapped around the binding
post and clamped by the screw down cap.
4. Straight wire can be inserted into the hole drilled
through the bottom of the binding post and
clamped down by the screw cap.
5. Pin connectors can be inserted into the hole
drilled through the bottom of the binding post
and clamped down by the screw cap.


Specyfikacje produktu

Marka: Pyle
Kategoria: głośnik
Model: PHQBS62

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PHQBS62, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Pyle

Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
Pyle

Pyle PDIC61RD Instrukcja

30 Grudnia 2025
Pyle

Pyle PHSP6K Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIW67 Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC60 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLATV65BT Instrukcja

6 Grudnia 2024
Pyle

Pyle PDIC81RD Instrukcja

6 Grudnia 2024
Pyle

Pyle PDWR40W Instrukcja

6 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik