Instrukcja obsługi Pyle PDWR40B

Pyle Speaker PDWR40B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PDWR40B (2 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
www.PyleUSA.com
Featu
Installation
MOUNTING THE BRACKET MOUNTING
1. Remove the bracket knobs and the bracket
from the speaker.
2. Hold the bracket up to the mounting surface.
" " can be mounted either horizontallyPYLE
or vertically. Hold the bracket so that the speaker
wire ts through the large, circular wire hole in
the bracket. Align the bracket to be square with
the surrounding. (Use a level for accuracy)
3. Mark the locations of the three shaped screw holes.
Use all of the holes.
4. Drill pilot holes into the mounting surface.
5. Gently pull the speaker wire through the wire hole
in the center of the mounting bracket.
Align the bracket so that the holes all line up.
6. Use your hardware to attach the bracket to the mounting surface.
Visit Our Website
SCAN
PyleUS
USER GUIDE
INDOOR/OUTDOOR
WEATHERPROOF SPEAKER SYSTEMS
Excellent for use on Boats Marinas, Decks,
Patios, Poolside, Outdoors, Etc.
Completely Water Proof
Each PDWR40B Features:
5 1/4” Aluminum Injection Cone Woofer
40 OZ. Magnet Structure
1”High Compliance Myiar Tweeter
Capacitor Crossover Network
Bass Reex Vent for added Bass Response
Heavy Duty ABS Constrution
Quick Connect/Disconnect Speaker
Terminals
Unique Spring Loaded Mounting System
Removable Rustproof Mesh Grills
Power: 200 Watts RMS/400 Watts Peak
Frequency Response: 40-22K HZ
Impedance: 4 Ohms
Dimensions: 6.25”(W) x 9.25”(H) x 5.75”(D)
FINAL ADJUSTMENTS
1. After checking that the speaker is in phase and works correctly, angle the speaker for the
best sound.
2. Hand-tighten the bracket knobs only. Power tools may over-tighten the knob and strip
the threads of the insert.
3. Check that the entire installation is safe and secure.
Connecting Your Speakers
California Prop 65 Warning
WARNING:
This product can expose you to chemicals, which is known to
the state of California to cause cancer birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs
Connecting the speakers to your amplier
or receiver.
First, turn your amplier o to avoid
damage which may result from accidental
shorting of the speaker leads.
Correct phase polarity is critical for proper
stereo imaging and bass performance.
The red (+) terminal on your amplier or
receiver must be connected to the red (+)
terminal on your speaker; the same applies
to the black (-) terminal.
Connect one loudspeaker at a time to
ensure proper connection of left and right
channels. Make sure all wires are rmly
fastened.
If you notice a high level of bass or central
image focus, double-check your connections
for proper polarity.

Specyfikacje produktu

Marka: Pyle
Kategoria: Speaker
Model: PDWR40B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PDWR40B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Pyle

Pyle

Pyle PPHP868STBG Instrukcja

6 Października 2024
Pyle

Pyle PDWR40B Instrukcja

6 Października 2024
Pyle

Pyle PDJ28WM Instrukcja

6 Października 2024
Pyle

Pyle PLMRBT33WT Instrukcja

6 Października 2024
Pyle

Pyle PCB3BK Instrukcja

5 Października 2024
Pyle

Pyle PRETRAMP50 Instrukcja

25 Września 2024
Pyle

Pyle PSUFM826LED Instrukcja

12 Września 2024
Pyle

Pyle PBMSPG15 Instrukcja

11 Września 2024
Pyle

Pyle PLSMRW64WT Instrukcja

7 Września 2024

Instrukcje Speaker

Najnowsze instrukcje dla Speaker

Atlas

Atlas ICM812 Instrukcja

6 Października 2024
Kicker

Kicker 48KMXL8 Instrukcja

6 Października 2024
Kicker

Kicker 46KMFC8 Instrukcja

6 Października 2024
Kicker

Kicker 40PS44 Instrukcja

6 Października 2024
Ikea

Ikea VAPPEBY 505.371.88 Instrukcja

6 Października 2024
Ikea

Ikea VAPPEBY 205.176.05 Instrukcja

6 Października 2024
Ikea

Ikea VAPPEBY 405.173.84 Instrukcja

6 Października 2024