Instrukcja obsługi Pyle PDA77BU

Pyle Receiver PDA77BU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PDA77BU (12 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
PDA77BU
Compact Home Theater Amplifier Stereo
Receiver with Bluetooth Wireless Streaming, Independent Mic Echo
& Volume Control, MP3/USB/SD/AUX/FM Radio (800 Watt)
Please note that PYLEUSA reserve the right to make production changes during
the life of our product lines that may impact the information in this manual.
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER OF THIS UNIT. THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
1. . Read these instructions thoroughly before using this item
2. Keep these instructions for future reference.
3. . Heed all warnings
4. Follow all instructions.
5. WARNING: To prevent re or electric shock, do not expose this equipment to rain
or moisture. Do not store or operate this product near any liquids.
6. Clean only with a dry cloth.
7. Do not store or operate this product near any heat sources such as radiators, heat
registers, stoves, or other apparatuses (including ampliers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a round grounding prong. The wide blade or third prong is
provided for your safety. If the provided plug does not t your outlet, consult an
electrician for the replacement of the obsolete outlet.
9. Protect the all wires connected to this unit from being walked on or pinched,
particularly plugs and the point where they exit from the unit. When removing the
cord from the power outlet, remove it by holding the plug not by pulling the cord.
10. Unplug the unit during lighting storms or when unused for long periods of time.
11. When wiring this unit and all other equipment used in connection to this unit
make sure that all of your equipment is turned OFF.
12. Once installation and wiring is complete power on all your equipment with the
volume and level controls turned DOWN. Once all the equipment is ON slowly
raise the volume or level controls to their proper positions.
13. When grounding this unit, be sure to do so correctly, so as not to defeat the
built-in grounding in this unit.
The lighting ash with arrow head symbol within an equilateral triangle is intended
to alert the user to the presence of voltage within the products DANGEROUS
enclosure that may be of sucient magnitude to constitute a risk of electric shock
to humans. Users should exhibit extra safety when this symbol appears in this
instruction manual and follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
this manual.
www.PyleUSA.com
2
www.PyleUSA.com
3
14. Before placing, installing, rigging, or suspending any product, inspect all hardware,
suspension, cabinets, transducers, brackets and associated equipment for damage.
Any missing, corroded, deformed, or non-load rated component could signicantly
reduce the strength of the installation, placement or array. Any such condition
severely reduces the safety of the installation and should be immediately
corrected. Use only hardware which is rated for the loading conditions of the
installation and any possible short-term, unexpected overloading.
Never exceed the rating of the hardware or equipment.
15. Consult a licensed, professional engineer regarding physical equipment installation.
Ensure that all local, state and national Regulations regarding the safety and
operation of equipment are understood and adhered to.
16. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Introduction
To get the most from the Wireless BT Streaming Amplier, it is recommended
that you review all of the information provided in the instruction manual before
operating the equipment.
ATTENTION
1. A: Connect the audio input with the CD/DVD/TV audio output.
NOTES:
These jacks does not support video signal, so make
sure that the CD/DVD/AUX terminal are connected.
Noise will be heard when you connect the unit with
CD/DVD/TV video output by mistake.
2. B: Signal output that can be connected with other
amplier or speakers that comes with an Amp.
3. STEPS FOR FM RADIO CONTROL
A. Connect the FM antenna before using the FM radio.
B. Press button on the front panel or remote control to select FM mode.MODE
C. Press PLAY/PAUSE button on the front panel or remote control, and will auto
scan and sore FM Radio station from 87.5Mhz to 108Mhz.
D. Press button to select the FM station.NEXT/PREV

Specyfikacje produktu

Marka: Pyle
Kategoria: Receiver
Model: PDA77BU

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PDA77BU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver Pyle

Pyle

Pyle PHDA6BT Instrukcja

29 Września 2024
Pyle

Pyle PDA77BU Instrukcja

29 Września 2024
Pyle

Pyle PT865BT Instrukcja

29 Września 2024
Pyle

Pyle PCM30A Instrukcja

12 Września 2024
Pyle

Pyle PVA2 Instrukcja

9 Września 2024
Pyle

Pyle PVAMP30 Instrukcja

7 Września 2024
Pyle

Pyle PT694BT Instrukcja

31 Sierpnia 2024
Pyle

Pyle PVA3U Instrukcja

26 Sierpnia 2024
Pyle

Pyle PT390BTU Instrukcja

25 Sierpnia 2024

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

Naim

Naim Nait 50 Instrukcja

29 Września 2024
CYP

CYP QU-8MS Instrukcja

29 Września 2024
Stewart

Stewart CVA50MX-1 Instrukcja

29 Września 2024
CYP

CYP AU-A300-HBT Instrukcja

29 Września 2024
CYP

CYP QU-2-4K22 Instrukcja

29 Września 2024
CYP

CYP QU-18S Instrukcja

29 Września 2024
Stewart

Stewart FLX80-4 Instrukcja

29 Września 2024
CYP

CYP QU-14S Instrukcja

29 Września 2024
Stewart

Stewart AV25-2 Instrukcja

29 Września 2024
Stewart

Stewart FLX160-2 Instrukcja

29 Września 2024