Instrukcja obsługi Pyle PAMP2000BT

Pyle odbiornik PAMP2000BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PAMP2000BT (7 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
Read Instructions All the safety and operating instructions should be read before the appliance is
operated.
2. Retain Instructions — The safety and operating instructions should be retained for future reference.
3. Heed Warnings — All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow Instructions — All operation and use instructions should be followed.
5. Water and Moisture — The appliance should not be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool, or a wet basement.
6. Ventilation — The appliance should be situated so that its location or position does not interfere with
its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings: or placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through the ventilation openings.
7. Heat — The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
8. Power Sources — The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
9. Grounding or Polarization — Precaution should be taken to insure that the grounding or polarization
means of an appliance is not defeated.
10. Power-Cord Protection — Power supply cords should be routed so that they are not likely to be
walked on or pinched by attention to cords at items placed upon or against them, paying particular
plugs, convenience receptacles, and the point at which they exit from the appliance.
11. Cleaning — The appliance should be cleaned only as recommended by the manufacturer.
12. Power Lines — An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
13. Nonuse Periods — The power cord of the appliance should be
unplugged from the outlet when the appliance is to be left unused for a long period of time.
14. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
15. Carts and Stands — If the appliance is used with a cart or stand, the cart or stand should be a type
recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces cause the appliance and cart combination to overturn.
16. Mounting — The appliance should be mounted only as recommended by the manufacturer.
17. Damage Requiring Service — The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or plug has been damaged.
B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
C. The appliance has been exposed to rain.
D. The appliance has been dropped, or the enclosure damaged.
E. The appliance does not appear to operate normally or exhibits a marked change in performance.
18. Servicing — The user should not attempt to service the appliance beyond that described in the user’s
operating instructions. All other servicing should be referred to qualified personnel.
19. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
20. Replacement Parts — When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check — Upon completion of any service or repairs to this appliance, ask the service technician to
perform safety checks to determine that the appliance is in proper operating condition.
Your new Pyle Amplifier:
Gives you the power and versatility you need in a professional sound system. The wide
frequency response handles easily amplification of voice and music. The signal sensing of dual
inputs turns the amplifier on automatically when music is sensed on RCA inputs. The activation
of Line 1 input, will override Line 2 input, making the amplifier perfect as a zone amplifier for
multi-room distribution audio systems.
FEATURES AND CONTROLS

Specyfikacje produktu

Marka: Pyle
Kategoria: odbiornik
Model: PAMP2000BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PAMP2000BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Pyle

Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Pyle

Pyle PLMRMBT5B Instrukcja

6 Grudnia 2024
Pyle

Pyle P3001AT Instrukcja

6 Grudnia 2024
Pyle

Pyle Pro PTAU23 Instrukcja

8 Października 2024
Pyle

Pyle PLAM2001D Instrukcja

2 Października 2024
Pyle

Pyle PT1100 Instrukcja

2 Października 2024
Pyle

Pyle PFA100 Instrukcja

2 Października 2024
Pyle

Pyle PDA35BT Instrukcja

2 Października 2024
Pyle

Pyle PLA2200 Instrukcja

30 Września 2024
Pyle

Pyle PHDA6BT Instrukcja

29 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025
Boss

Boss DD-500 Instrukcja

12 Stycznia 2025