Instrukcja obs艂ugi Pro-Ject Phono Box Ultra 500

Pro-Ject system hi-fi Phono Box Ultra 500

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Pro-Ject Phono Box Ultra 500 (6 stron) w kategorii system hi-fi. Ta instrukcja by艂a pomocna dla 6 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Strona 1/6
INSTRUCTIONS FOR USE
Phono Box ultra 500
Pro-Ject Audio Systems Phono Box ultra 8. .25 500 路 Revision 201 10
2
Dear music lover,
thank you for purchasing a P -Ject Audio Systems phono amplifier. ro
In order to achieve maximum performance and reliability you should study these instructions for use
carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that
the voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are
wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The
product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any
other similar conditions.
Use the dip switches at the bottom of the unit to set input gain, input capacitance and input impedance.
Please set both channels equally.
To find out which type your cartridge is please consult the literature accompanying your cartridge.
The literature for cartridges should also specify the correct input impedance (low-output MC cartridges)
and the correct input capacitance (high-output MC and MM cartridges), into which the cartridge is
designed to work. If in doubt please consult your dealer.
To alter settings the unit must be disconnected from the power supply and the amplifier.
* Input capacitance is irrelevant for low-output MC cartridges
3
A switch at the back of the activates and deactivates the subsonic filter. phono amplifier
Make all connections whilst the phono amplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked
red, the left channel black or white.
Do not connect the phono amplifiers output to a phono input (sometimes labelled gram disc, or
RIAA) on the amplifier.
Never use any other power supply than the one supplied with the unit.
Connect the tonearm signal lead to the of the phono amplifier. The earthing wire may be connected to In
the screw terminal if you encounter hum problems when using the record player.
Connect the of the phono amplifier to a line input (such as Out AUX, , , CD Tuner Tape Video or ) on
your amplifier.
Connect the low voltage plug from the power supply to the Power 18V DC socket of the phono amplifier
before connecting the power supply to the mains.


Specyfikacje produktu

Marka: Pro-Ject
Kategoria: system hi-fi
Model: Phono Box Ultra 500

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Pro-Ject Phono Box Ultra 500, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮




Instrukcje system hi-fi Pro-Ject

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi