Instrukcja obsługi Power Dynamics PDW360MP3

Power Dynamics Niesklasyfikowane PDW360MP3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Power Dynamics PDW360MP3 (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

PDW Series Mixer-Amplier

Ref. nr.: 952.086, 952.088

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is s tched on for the rst time, wi

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause elect cal shock d malfunction. ri an

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains d and d not damage it. A lea o

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- he plug and/or the mains lea are damaged, they If t d

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer.

- To avoid re and sho hazard, not expose the unit to ck do

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will no be used for t a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the unit in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit o of the reach of children. Do not leave ut

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the cont ls. ro

- This t is with speaker inside which can cause uni

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the pr ct for a long period of odu

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- e unit has fallen, always ha it checked by a If th ve

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use or inal spares for repairs, otherwise serious ig

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- ke sure that the mains lead nnot be damaged when Ma ca

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this u nit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the C certicate and E

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recyc ng centre. Ask your local authorities or your li

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any irs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid repa

your warra y. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings nt

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

rec mendations and warnings. This is also applicable to all damages in whatever form. om

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be

returned, it is important that the product is returned in the original factory box and packaging.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains

voltage corresponds to this, all other voltages than specied, the light eect can be irrepa bly damaged. The product must also ra

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

elec grtrical ound to avoid the risk of electrocution or re.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuse holder on the rear panel with tting screwdriver. a

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

FRONT PANEL

1. DISPLAY: The display shows multiple forms of information, for example current MODE, elapsed time, etc.

2. BUTTON CLUSTER:

Mode - Press to change modes between playing SD, USB, MP3, FM and . BT

Previous - Press this button to go to the previous track/station Press and hold to lower the volume level. .

Next - Press this button to go t next track/station. Press and hold to increase the volume level. to he

Repeat - Press the repea butto once to continually repeat ALL tracks, press repeat once more to repeat just the current t n

track.

Play/pause / Store FM- Press this button to start/resume or pause play. Press and hold to automatically scan for FM

stations and store them in FM mode.

3. USB PORT: You can play media les from a USB device by connecting the device to this slot.

4. SD CARD SLOT: Insert an SD card in this slot.

5. MIC1 OUTPUT LEVEL CONTROL: Adjust the volume of the MIC channel. 1

6. MIC2/LINE 3 OUTPUT LEVEL CONTROL: Adjust the volume of the MIC2/LINE3 channel.

7. 1 LINE OUTPUT LEVEL CONTROL: Adjust the volume of the LINE channel. 1

8. LINE2 OUTPUT LEVEL CONTROL: Adjust the volume of the LINE2 channel.

9. MP3 OUTPUT LEVEL CONTROL: Adjust the volume of the MP3 channel.

10. ZONE VOLUME CONTROL: Adjus th volume for zone 1 - 6 separately. t e

11. ECHO CONTROL: Turn to adjust the microphone echo eect.

12. ECHO TIME CONTROL: Turn to adjust the repeat value of the echo eect. Repeats will be increased wh rotating en

clockwise repeats will be reduced when rotating counter-clockwise.,

13. BASS CONTROL: Adjust the low frequencies of the corresponding channel.

14. TREBLE CONTROL: Adjust the high frequencies of the corresponding channel.

15. MASTER VOLUME CONTROL: Turn to adjust the master volume level.

16. STANDBY: Press to put the device in/out of standby.

Specyfikacje produktu

Marka:	Power Dynamics
Kategoria:	Niesklasyfikowane
Model:	PDW360MP3
Kolor produktu:	Czarny
Wbudowany wyświetlacz:	Tak
Częstotliwość wejściowa AC:	50-60 Hz
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	95 mm
Szerokość produktu:	420 mm
Głębokość produktu:	310 mm
Waga produktu:	8750 g
Technologia łączności:	Przewodowa
Moc wyjściowa (RMS):	200 W
Wtyk słuchawek:	6.3 mm
Kanały wyjścia audio:	6.0 kan.
Wejście XLR:	Tak
Moc szczytowa na kanał:	360 W
Klasa wzmacniacza:	D
Współczynnik zawartości harmonicznych:	1 %
Stosunek sygnału do szumu:	85 dB
Regulacja głośności:	obrotowy
Zasięg częstotliwości:	100 - 19000 Hz
Czułość wejścia:	400 mV
Impedancja wejściowa:	16 Ω
Regulacja poziomu tonów niskich:	Tak
Wyjścia linii RCA:	1
Pojemność stelaża:	2U
Wejścia liniowe (RCA):	2