Instrukcja obsługi Planet WGS-810


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet WGS-810 (3 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 8-port 10/100/1000T Wall-
mounted Gigabit Ethernet Switch.
In the following sections, unless specied, the term “Wall-mount
Gigabit Switch mentioned in this user’s manual refers to the
above model.
Open the box of the Wall-mount Gigabit Switch and carefully
unpack it. The box should contain the following items:
The Wall-mount Gigabit Switch x 1 User’s Manual x 1
Wall-mounted Kit x 1 Magnet Kit x 1 RJ45 Dust Cap x 8
2. Hardware Description
2.1 Switch Front View
The front panel of the Wall-mount Gigabit Switch consists of 8
auto-sensing 10/100/1000Mbps Ethernet RJ45 ports. The LED
indicators are also located on the RJ45 ports of the Wall-mount
Gigabit Switch.
WGS-810 Front View
3 421
7 865
PWR
ACTLNK
DC Input Range
12V
, 1A max.
Standard
VLAN
Extend
Uplink
ACTLNK
Figure 2-1: WGS-810
3. Installation
3.1 Wall-mount Installation
To install the Wall-mount Gigabit Switch on the wall, simply follow
the following steps:
Step 1: Place the Wall-mount Gigabit Switch on the wall and
mark the four holes with a pencil.
133mm
Ø4mm
Ø8mm
6mm
Step 2-1: Hammer the anchors provided into the four holes and
use the four screws to tightly x the switch onto the
wall by screwing them.
PoE+
34
2
1
7 8
6
5
Uplink
60W
PoE Usage
45W
30W
15W
PWR
CT
LNK
Po n-U
se
ACTLNK
DC Input Range
48-56V
, 1.5A max.
Standard
VLAN
Exten
d
2.3 DIP Switch
The front panel of Wall-mount Gigabit Switch provides one DIP
switch for and mode selections. The Standard, VLAN Extend
detailed descriptions are shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the Wall-mount Gigabit
Switch operate as a general switch and all
ports operate at 10/100/1000Mbps auto-
negotiation.
Standard
VLAN
Extend
This mode makes the Wall-mount Gigabit
Switch operate as a switch VLAN isolation
and
1. Port 1 to will isolate respectively.port 6
2. Port 1 to port 6 can only communicate
with port 7 and port 8 (uplink port).
Standard
VLAN
Extend
This mode makes the Wall-mount Gigabit
Switch operate as a VLAN isolation switch and
1. Port 1 to port 6 will isolate respectively.
2. Port 1 to port 6 can only communicate
with port 7 and port 8 (uplink port).
3. Transmission distance of 250m at speed of
10Mbps.
Note
Please reboot the Wall-mount Gigabit Switch after
adjusting the DIP switch.
Power Adapter x 1 DIN-rail Kit x 1
If any item is found missing or damaged, please contact your local
reseller for replacement..
2.2 LED Indicators
System and Ports
LED Color Function
PWR Green Lights to indicate that the Switch has power.
LNK/
ACT Green
Lights To indicate the link through that port is
successfully established.
Blinks
To indicate that the switch is actively
sending or receiving data over that
port.
2.4 Physical Dimensions
W x D x H: 148 x 24.2 x 134 mm
3 421
7 865
PWR
ACTLNK
DC Input Range
12V
, 1A max.
Standard
VLAN
Extend
Uplink
ACTLNK
Step 2-2: Or the switch, shown in the picture below, can be hung
on the wall by screwing the two screws leaving a space
of 2mm apart after the anchors are hammered in.
2mm
M4 Screw
PoE+
342
1
786
5
Uplink
60W
PoE Us age
45W
30W
15W
PWR
ACT
LNK
PoE-in-Use
ACTLNK
DC Input Range
48-56V
, 1.5A
max.
Standa rd
VLAN
Exte nd
3.2 DIN-rail Mounting Installation
The DIN-rail kit is included in the Wall-mount Gigabit Switch
package. To hang up the Wall-mount Gigabit Switch, follow the
steps below:
Step 1: Screw the DIN-rail bracket on the Wall-mount Gigabit
Switch.
- 9 -
- 10 -
- 11 -
- 12 - - 13 -
www.PLANET.com.tw
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy savings, please remove the DC plug or slide the hardware-based Power Switch
to the OFF position to disconnect the device from the power circuit. Without removing the DC plug from or switching off the device, the device will still consume
power from the power source. In view of Saving the Energy and reducing the unnecessary power consumption, it is strongly suggested to power off or to remove
the DC plug from the device if this device is not intended to be active.
PLANET Technology Corp.
2350-AW1010-000
10F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Warn ngi :
This device is compliant with Class A of CISPR 32.
In a residential environment this device may cause radio interference.
Industrial 8-Port 10/100/1000T Wall-mounted
Gigabit Ethernet Switch
WGS-810
Step 2: Lightly press the bottom of DIN-rail bracket into the
track.
Step 3: Check whether the DIN-rail bracket is tightly on the track.
1Push
2Click
PoE+
3 421
7 865
Upl ink
6
0W
Po
E Us age
4
5W
3
0W
15 W
PWR
ACTLNK
P
oE-in-Us
e
ACTLNK
DC
In put R a
nge
48-
56V
, 1. 5A m ax.
Stan dard
VL AN
Exten d
PoE
+
3421
78
6
5
Upl i
nk
60W
PoE
Usage
45W
30W
15W
PWR
AC T
LN
K
Po E-in-Use
AC
T
LN K
DC Input Range
48-56V
, 1. 5A ma x.
Stan dard
VLA
N
Ex
tend
3.3 Magnet Installation
To install the Wall-mount Gigabit Switch on a magnetic surface,
simply follow the following diagram:
PoE+
342
1
786
5
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Us
e
ACTLNK
DC Input Range
48-56V
, 1.5A max.
Standard
VLAN
Extend
Appendix: Product Specications
Model WGS-810
Hardware Specications
Network
Connector
8-port RJ45 for 10/100/1000BASE-T
Auto-negotiation and auto MDI/MDI-X
Power
Requirements 12V DC, 1A max.
Power
Consumption 3 watts/10 BTU
ESD Protection 4KV DC
Surge Protection 6KV DC
DIP Switch Selectable operation mode
- Standard/VLAN/Extend
Enclosure IP30 metal
Dimensions 148 x 24.2 x 134 mm (W x D x H)
Weight 446 g
Switch Specications
MAC Address
Table
4K MAC address table with auto learning
function
Data Buer 64Kbytes
Switch Fabric 16Gbps
Switch Throughput 11.9Mpps@64bytes
Flow Control Back pressure for half duplex.
IEEE 802.3x pause frame for full duplex
4. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and Users Manual on PLANET Web site rst
to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Switch support team mail address:
support @planet.com.tw
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Standard Conformance
Standard
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3az Energy Ecient Ethernet (EEE)
Regulatory
Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature: -20 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)


Specyfikacje produktu

Marka: Planet
Kategoria: przełącznik
Model: WGS-810

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Planet WGS-810, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przełącznik Planet

Planet

Planet IGTP-805AT Instrukcja

5 Października 2024
Planet

Planet IPM-16230 Instrukcja

5 Października 2024
Planet

Planet FSD-804P Instrukcja

5 Października 2024
Planet

Planet UPOE-1600G Instrukcja

3 Października 2024
Planet

Planet WS-1032P Instrukcja

3 Października 2024
Planet

Planet IPOE-162S Instrukcja

3 Października 2024
Planet

Planet IPOE-162 Instrukcja

3 Października 2024
Planet

Planet XGS3-24242 Instrukcja

3 Października 2024
Planet

Planet POE-171 Instrukcja

3 Października 2024
Planet

Planet POE-171A-95 Instrukcja

3 Października 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

INOGENI

INOGENI CAM230 Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-5248P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2624P Instrukcja

14 Stycznia 2025
Luxul

Luxul XGS-1005 Instrukcja

14 Stycznia 2025
Luxul

Luxul AGS-1008M Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-1208P Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-7048P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2600 Instrukcja

14 Stycznia 2025