Instrukcja obsługi Planet IGS-1600T

Planet Niesklasyfikowane IGS-1600T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet IGS-1600T (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET Industrial Multi-port
10/100/1000T Gigabit Ethernet Switch, IGS-1600T/IGS-1820TF.
In the following sections, the term “Industrial Ethernet
Switch” means the IGS-1600T or IGS-1820TF.
Open the box of the Industrial Ethernet Switch and carefully
unpack it. The box should contain the following items:
Industrial Ethernet
Switch x 1
User’s Manual x 1 RJ45 Dust Cap x 16
DIN-rail Kit Wall-mount Kit SFP Dust Cap x 2
(IGS-1820TF only)
If any of these are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the
original packing material, and use them again to repack the
product in case there is a need to return it to us for repair.
2.2 LEDDenition:
System
LED Color Function
P1 Green Lights Lights to indicate power input 1
has power.
P2 Green Lights Lights to indicate power input 2
has power.
Fault LightsRed Lights to indicate that AC or DC
power has failed.
Per 10/100/1000BASE-T Port
LED Color Function
1000
LNK/ACT Green
Lights
To indicate the link through that
port is successfully established at
1000Mbps.
Blinks
To indicate that the switch is
actively sending or receiving data
over that port.
10/100
LNK/ACT Amber
Lights To indicate the port is successfully
established at 10/100Mbps.
Blinks
To indicate that the Switch is
actively sending or receiving data
over that port.
2.5 WiringtheFaultAlarmContact
The fault alarm contacts are in the middle of the terminal block
connector as the picture shows below. Inserting the wires, the
Industrial Ethernet Switch will detect the fault status of the
power failure, and then forms an open circuit. The following
illustration shows an application example for wiring the fault
alarm contacts.
Fault Alarm Contacts
The Fault Alarm Contacts are
energized (CLOSE) for normal
operation and will OPEN when
failure occurs
Fault
Insert the wires into the fault alarm contacts
Note
1. The wire gauge for the terminal block should be
in the range between 12 and 24 AWG.
2. Alarm relay circuit accepts up to 24V, max. 1A
currents.
2.4 WiringthePowerInputs
The 6-contact terminal block connector on the top panel of
Industrial Ethernet Switch is used for two redundant power
inputs. Please follow the steps below to insert the power wire.
Caution
When performing any of the procedures like
inserting the wires or tightening the wire-clamp
screws, make sure the power is OFF to prevent
from getting an electric shock.
Insert positive and negative DC power wires into contacts 1
and 2 for POWER 1, or contacts 5 and 6 for POWER 2.
Fault
V1+ V2+
PWR2PWR1
Max. fault loading: 24V, 1A
DC Input: 12-48V , 1.5A max.
AC Input: 24V , 1A max .
1 2 3 4 5 6
2.HardwareIntroduction
2.1 SwitchFrontPanel
The front panel of the consists of Industrial Ethernet Switch
Ethernet interfaces and LED indicators.
Front View
FaultP2P1
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
ACT1000 LNK
ACT10/100 LNK
FaultP2P1
1
3
5
7
2
4
6
8
9
11
13
15
10
17
12
14
16
ACT1000 LNK
ACT10/100 LNK
1000 LNK/ACT
18
Figure1:
IGS-1600T Front View
Figure2:
IGS-1820TF Front View
Per1000BASE-XSFPPort
 (Port-17andPort-18ofIGS-1820TF)
LED Color Function
LNK/ACT Green
Lights To indicate the port is successfully
established at 1000Mbps.
Blinks
To indicate that the Switch is
actively sending or receiving data
over that port.
2.3 SwitchUpperPanel
The upper panel of the Industrial Ethernet Switch consists of
one terminal block connector within two power input and one
relay output.
Fault
V1+ V2+
PWR2PWR1
Max. fault loading: 24V, 1A
DC Input: 12-48V , 1.5A max.
AC Input: 24V , 1A max.
1 2 3 4 5 6
Figure3:IGS-1600T and IGS-1820TF Top View
Tighten the wire-clamp screws for preventing the wires from
loosening.
1 2 3 4 5 6
Power 1 Power 2Fault
+ - + -
Note
1. The wire gauge for the terminal block should be
in the range between 12 and 24 AWG.
2. The power input range is DC 12V ~ 48V and
supports AC 24V.
3. Use one power input when using AC 24V.
2.6 GroundingtheDevice
Users MUST complete grounding wired with the device;
otherwise, a sudden lightning could cause fatal damage to the
device.
Fault
V1+ V2+
PWR2PWR1
Max. fault loading: 24V, 1A
DC Input: 12-48V , 1.5A max.
AC Input: 24V , 1A max.
1 2 3 4 5 6
Earth Ground
Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER
WARRANTY.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
3.Installation
This section describes the functionalities of the Industrial
Ethernet Switch’s components and guides you to installing it
on the DIN rail and wall. Please read this chapter completely
before continuing.
Note
This following pictures show how to install the device.
However, the device in the picture is not IGS-1600T
or IGS-1820TF.
3.1 DIN-railMountingInstallation
1
2
3.2 Wall-mountPlateMounting
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power
input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm,
Pin 5/6 for Power 2
Alarm One relay output for power failure. Alarm relay
current carry ability: 1A @ 24V DC
Dimensions
(W x D x H) 66 x 107 x 152 mm 66 x 107 x 152 mm
Weight 743g 745g
Power
Requirements Dual DC 12~48V, AC 24V
Power
Consumption
DC input:
Max. 3.4 watts/
11.6BTU
(System on)
Max. 8.7 watts/
29.7BTU
(Full loading)
DC input:
Max. 3.4 watts/
11.6BTU
(System on)
Max. 11.1 watts/
37.9BTU
(Full loading)
AC input:
Max. 5 watts/17BTU
(System on)
Max. 13.99 watts/
47.8BTU
(Full loading)
AC input:
Max. 6 watts/20.5BTU
(System on)
Max. 15 watts/51.2BTU
(Full loading)
3.3 SideWall-mountPlateMounting
4.ProductSpecications
Product IGS-1600T IGS-1820TF
Hardware Specifications
Gigabit Ethernet
Copper Ports
16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X
ports
Gigabit SFP
Slots -- Two 1000BASE-SX/LX/
BX SFP interfaces
Switch
Architecture Store-and-Forward
Switch Fabric 32Gbps (non-blocking) 36Gbps (non-blocking)
Throughput
(packet per
second)
23.81Mpps@ 64 bytes 26.79Mpps@ 64 bytes
Address Table 8K entries, automatic source address learning
and aging
Shared Data
Buffer 4.1Mbits
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards
Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-
TX
IEEE 802.3ab
1000BASE-T
IEEE 802.3x flow
control and back
pressure
IEEE 802.1p Class of
Service
IEEE 802.3az Energy
Efficient Ethernet
(EEE)
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-
TX
IEEE 802.3ab
1000BASE-T
IEEE 802.3z
1000BASE-SX/LX
IEEE 802.3x flow
control and back
pressure
IEEE 802.1p Class of
Service
IEEE 802.3az Energy
Efficient Ethernet
(EEE)
Environment
Operating
Temperature -40 ~ 75 degrees C
Storage
Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
5.CustomerSupport
Thank you for purchasing PLANET products. You can browse
our online FAQ resource on PLANET web site rst to check if it
could solve your issue. If you need more support information,
please contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2019.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
FCCWarning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with this user’s guide,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
CEMarkWarning
This device is compliant with Class A of CISPR 32. In a
residential environment this equipment may cause radio
interference.
WEEEWarning
To avoid the potential eects on the environment and
human health as a result of the presence of
hazardous substances in electrical and electronic
equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted
municipal waste and have to collect such WEEE separately.

Specyfikacje produktu

Marka: Planet
Kategoria: Niesklasyfikowane
Model: IGS-1600T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Planet IGS-1600T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Planet

Planet

Planet LS100-SMK Instrukcja

9 Października 2024
Planet

Planet IGS-1000-4UP2X Instrukcja

9 Października 2024
Planet

Planet NMS-AIoT Instrukcja

9 Października 2024
Planet

Planet NMS-ST Instrukcja

9 Października 2024
Planet

Planet IGS-R4215-24T4X Instrukcja

5 Października 2024
Planet

Planet IXT-900-2X1UP Instrukcja

4 Października 2024
Planet

Planet AVS-4210-24HP4X Instrukcja

4 Października 2024
Planet

Planet TSN-5225-4T Instrukcja

4 Października 2024
Planet

Planet MGB-LX Instrukcja

4 Października 2024
Planet

Planet ISW-514PTF Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024