Instrukcja obsługi Planet GSD-504

Planet przełącznik GSD-504

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet GSD-504 (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

Power

Notice

1. The device is a power-required device,

meaning it will not work till it is powered.

If your networks should be active all the

time, please consider using UPS (Uninter-

rupted Power Supply) for your device. It

will prevent you from network data loss

or network downtime.

2. In some areas, installing a surge sup-

pression device may also help to protect

your Switch from being damaged by un-

regulated surge or current to the Switch

or the power adapter.

1. Package Contents

Check the contents of your package for the following

parts:

Gigabit Ethernet

Switch x 1

5V DC

1A Power

Adapter x 1

User’s

Manual x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

Hardware

 Made from plastic and desktop size and wall-mount

design

 LED indicators for system power, per port Link / Act

 5V DC, 1A external power adapter

 FCC, CE Class B compliant

4. LED Indicators

Figures 4-1 and 4-2 show the front panel of GSD-504

and GSD-804, respectively.

Figure 4-1: GSD-504 LED Panel

Figure 4-2: GSD-804 LED Panel

LED Color Function

PWR Green

Light Indicates that the Switch is

powered ON.

OFF Indicates that the Switch is

powered OFF.

Link/ACT Green

Light

Indicates the link

through that port is

successfully established at

10/100/1000Mbps.

Blink

Indicates the Switch is

actively sending or receiving

data over that port.

2. Product Features

RJ-45 Interface

 5/8 10/100/1000Mbps Gigabit Ethernet ports

 Complies with IEEE 802.3, 10Base-T, IEEE 802.3u

100Base-TX, IEEE 802.3ab 1000Base-T

 Supports Auto MDI/MDI-X function

Switching

 Hardware based 10/100Mbps, Half / Full Duplex and

1000Mbps Full Duplex mode, Flow Control and Auto-

negotiation

 Features Store-and-Forward mode with wire-speed

ltering and forwarding rates

 IEEE 802.3x ow control for Full Duplex operation

and backpressure for Half Duplex operation

 Integrated address look-up engine, supporting 2K/8K

absolute MAC addresses (GSD-504 / GSD-804)

 9K Jumbo packet size

 Power Saving ability for Green networking

 Automatic Address Learning and Address Aging

 Supports CSMA/CD protocol

3. Switch Top Panel

Figures 3-1 and 3-2 show the top panel of GSD-504

and GSD-804, respectively.

Figure 3-1: GSD-504 Top Panel

Figure 3-2: GSD-804 Top Panel

6. Installing the Switch

This part describes how to install your Gigabit Ethernet

Switch and make connections to it. Please read the

following topics and perform the procedures in the order

being presented.

Note

This Switch does not need software configu-

ration.

 Desktop Installation

To install the Switch on desktop, simply follow the

following steps:

Step 1: Place the Switch on the desk near a power

source.

Step 2: Keep some ventilation space between the

Switch and the surrounding objects.

Note

When choosing a location, please keep in

mind the environmental restrictions dis-

cussed in Chapter 7 under Product Specifi-

cations.

5. Switch Rear Panel

Figures 5-1 and 5-2 show the rear panel of GSD-504

and GSD-804, respectively.

Figure 5-1: GSD-504 Rear Panel

Figure 5-2: GSD-804 Rear Panel

- 9 -

- 10 - - 12 -

- 11 -

Step 3: Connect your Switch to network devices.

A. Connect one end of a standard network

cable to the 10/100/1000 RJ-45 ports on

the rear panel of the Switch.

B. Connect the other end of the cable to the

network devices such as printer servers,

workstations or routers, etc.

Step 4: Supply power to the Switch.

A. Connect one end of the power cable to the

Switch.

B. Connect the 5V DC power adapter to a

standard wall outlet.

When the Switch receives power, the Power LED should

remain solid Green.

PC/Laptop

xDSL/Cable RouterInternet Power Adapter

RJ-45

Power

0110 1

010

Throughput

(packet per second) 7.44Mpps 11.9Mpps

Jumbo packet size 9K

Standards Conformance

Standards Compliance

IEEE 802.3 (Ethernet)

IEEE 802.3u

(Fast Ethernet)

IEEE 802.3ab

(Gigabit Ethernet)

IEEE 802.3x

(Full-duplex Flow Control)

IEEE 802.3az Energy

Efcient Ethernet (EEE)

Regulation Compliance FCC Part 15 Class B, CE

Environments

Temperature Operating: 0~50 degrees C

Storage: -10~70 degrees C

Humidity

Operating: 5% to 95%,

Storage: 5% to 95%

(non-condensing)

7. Product Specications

Product GSD-504 GSD-804

Hardware Specications

Hardware Version 7

10/100/1000Base-T Ports 5 Auto MDI/

MDIX ports

8 Auto MDI/

MDIX ports

LED Display One for power, One for Link

/ ACT Per Port

Enclosure Plastic

Dimensions (mm) 168 x 100 x 29mm

Weight (g) 138g 175g

Power Requirements

(External power adapter) 5V DC, 1A

Power Consumption

(100M Full operation)

3.3 watts /

11 BTU

4 watts / 13

BTU

Switch Specications

Switch Processing

Scheme Store-and-Forward

Address Table 2K 8K

Flow Control

Back pressure Half Duplex,

IEEE 802.3x Pause Frame

Full Duplex

Switch Fabric 10Gbps 16Gbps

8. Cu tomer Supports

Thank you for purchasing PLANET products. You can

browse our online FAQ resource on PLANET Website rst

to check if it could solve you issue. If you need more

support information, please contact PLANET switch

support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address :

support_switch@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product: 5 / 8 -Port 10/100/1000Mbps Gigabit Ethernet Switch , Plastic

*Model Number: GSD-504, GSD-804

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on (2004/108/EC).

For the evaluation regarding the EMC, the following standards were applied:

EN 55022 (2010+AC: 2011)

EN 61000-3-2 (2006+A1:2009+A2:2009)

EN 61000-3-3 (2008)

EN 55024 (2010)

Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Product Manager

Taiwan 30, April, 2014

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Specyfikacje produktu

Marka:	Planet
Kategoria:	przełącznik
Model:	GSD-504

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Planet GSD-504, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje przełącznik Planet

Planet IGTP-805AT Instrukcja

5 Października 2024

Planet IPM-16230 Instrukcja

5 Października 2024

Planet FSD-804P Instrukcja

5 Października 2024

Planet UPOE-1600G Instrukcja

3 Października 2024

Planet WS-1032P Instrukcja

3 Października 2024

Planet IPOE-162S Instrukcja

3 Października 2024

Planet IPOE-162 Instrukcja

3 Października 2024

Planet XGS3-24242 Instrukcja

3 Października 2024

Planet POE-171 Instrukcja

3 Października 2024

Planet POE-171A-95 Instrukcja

3 Października 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Netgear GS110TPP Instrukcja

15 Października 2024

ZyXEL SFP-LHX1310-40-D Instrukcja

14 Października 2024

Tripp Lite B005-DPUA4 Instrukcja

11 Października 2024

Lancom CS-8132F Instrukcja

9 Października 2024

Lancom YS-7154CF Instrukcja

9 Października 2024

TP-Link Festa FS328G Instrukcja

9 Października 2024

Totolink SW24DM Instrukcja

9 Października 2024

Totolink SW1008P Instrukcja

9 Października 2024

Totolink SW24G2 Instrukcja

9 Października 2024

Cudy FS1006P Instrukcja

9 Października 2024