Instrukcja obsล‚ugi Planet GSD-2022P

Planet Schakelaar GSD-2022P

Przeczytaj poniลผej ๐Ÿ“– instrukcjฤ™ obsล‚ugi w jฤ™zyku polskim dla Planet GSD-2022P (2 stron) w kategorii Schakelaar. Ta instrukcja byล‚a pomocna dla 4 osรณb i zostaล‚a oceniona przez 2 uลผytkownikรณw na ล›rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 16-Port 10/100/1000T 802.3at PoE+
Ethernet Switch, GSD-2022P. mentioned in โ€œ802.3at PoE+ Switchโ€
this Guide refers to the GSD-2022P.
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The
box should contain the following items:
The 802.3at PoE+ Switch x 1 Userโ€™s Manual x 1 Power Cord x 1
SFP Dust Cap
x 2 Screws x 8 Rack-mounting
Brackets x 2 Rubber Feet x 4
If any of these pieces are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
๏ƒ˜ Hardware-based DIP switch for or mode Standard, VLAN Extend
selection;
โˆ’๎˜ƒ VLAN๎˜ƒmode:๎˜ƒPorts๎˜ƒ1๎˜ƒto๎˜ƒ16๎˜ƒcannot๎˜ƒcommunicate๎˜ƒwith๎˜ƒeach๎˜ƒother,๎˜ƒ
but can communicate with the uplink ports 17 to 18 and SFP
ports 19 to 20
โˆ’๎˜ƒ Extend๎˜ƒ mode:๎˜ƒ Ports๎˜ƒ 1๎˜ƒ to๎˜ƒ 8๎˜ƒ have๎˜ƒ data๎˜ƒ rate๎˜ƒ of๎˜ƒ 10Mbps.๎˜ƒ The๎˜ƒ
farthest transmission distance is up to 250 meters and all ports
can communicate with each other.
๏ƒ˜๎˜ƒ VLAN๎˜ƒ mode๎˜ƒ is๎˜ƒ to๎˜ƒ isolate๎˜ƒ ports๎˜ƒ to๎˜ƒ prevent๎˜ƒ broadcast๎˜ƒ storm๎˜ƒ and๎˜ƒ
defend๎˜ƒDHCP๎˜ƒspoo๎šฟng
๏ƒ˜ Automatic address learning and address aging
๏ƒ˜๎˜ƒ Supports๎˜ƒEnergy-E๎ง’cient๎˜ƒEthernet๎˜ƒ(EEE)๎˜ƒfunction๎˜ƒ(IEEE๎˜ƒ802.3az)
๏ฎ Hardware
๏ƒ˜๎˜ƒ 12-inch๎˜ƒdesktop๎˜ƒsize,๎˜ƒ1U๎˜ƒheight
๏ƒ˜ LED indicators for system power, per port PoE ready and PoE
activity,๎˜ƒspeed,๎˜ƒLink/Act
๏ƒ˜๎˜ƒ 1๎˜ƒsilent๎˜ƒfan๎˜ƒto๎˜ƒprovide๎˜ƒstable๎˜ƒand๎˜ƒe๎ง’cient๎˜ƒpower๎˜ƒperformance
๏ƒ˜๎˜ƒ Supports๎˜ƒ contact๎˜ƒ discharge๎˜ƒof๎˜ƒ ยฑ6KV๎˜ƒ DC๎˜ƒ and๎˜ƒ air๎˜ƒdistance๎˜ƒ discharge๎˜ƒ
of๎˜ƒยฑ8KV๎˜ƒDC๎˜ƒfor๎˜ƒEthernet๎˜ƒESD๎˜ƒprotection
๏ƒ˜๎˜ƒ Supports๎˜ƒยฑ6KV๎˜ƒsurge๎˜ƒimmunity
3.๎˜ƒProduct๎˜ƒSpeci๎šฟcations
Model GSD-2022P
Hardware๎˜ƒSpeci๎šฟcations
10/100/1000BASE-T
Copper Ports 18 auto MDI/MDIX
4.2 LED Indicators
๏ฎ System
LED Color Function
PWR Green Lights to indicate the Switch has power.
๏ฎ Per 10/100/1000BASE-T Port
LED Color Function
10/100/1000
LNK/ACT Green
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
actively๎˜ƒsending๎˜ƒor๎˜ƒreceiving๎˜ƒdata๎˜ƒover๎˜ƒ
that port.
PoE in Use Amber Lights๎˜ƒto๎˜ƒindicate๎˜ƒthe๎˜ƒport๎˜ƒis๎˜ƒproviding๎˜ƒ
PoE DC in-line power.
๏ฎ Per 1000BASE-X SFP Interface
LED Color Function
1000
LNK/ACT Green
Lights to indicate the link through that port
is successfully established at 1000Mbps.
Blinks๎˜ƒto๎˜ƒindicate๎˜ƒthat๎˜ƒthe๎˜ƒSwitch๎˜ƒis๎˜ƒactively๎˜ƒ
sending๎˜ƒor๎˜ƒreceiving๎˜ƒdata๎˜ƒover๎˜ƒthat๎˜ƒport.
Switch
Throughput@64bytes 29.76Mpps
MAC Address Table 8K entries
Jumbo Frame 9216 bytes
Flow Control IEEE 802.3x pause frame for full duplex;
back pressure for half duplex
Power๎˜ƒover๎˜ƒEthernet
PoE Standard IEEE๎˜ƒ802.3at๎˜ƒPower๎˜ƒover๎˜ƒEthernet๎˜ƒPlus/PSE
PoE Injector Ports 16
PoE Power Supply
Type
End-span/Mid-span:๎˜ƒ1/2/4/5๎˜ƒ(+),๎˜ƒ3/6/7/8๎˜ƒ
(-)
PoE Power Output
Per๎˜ƒport๎˜ƒ54V๎˜ƒDC,๎˜ƒ300mA.๎˜ƒmax.๎˜ƒ15.4๎˜ƒwatts๎˜ƒ
(IEEE๎˜ƒ802.3af)
Per๎˜ƒport๎˜ƒ54V๎˜ƒDC,๎˜ƒ600mA.๎˜ƒmax.๎˜ƒ32๎˜ƒwatts๎˜ƒ
(IEEE๎˜ƒ802.3at)
PoE Power Budget 185 watts
Number of PDs, 7
watts 16
Number of PDs, 15.4
watts 12
Number of PDs, 30
watts 6
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
2. Product Features
๏ฎ Physical Port
๏ƒ˜ 16-port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE
802.3at PoE+ injector function
๏ƒ˜ 2 10/100/1000BASE-T Gigabit RJ45 copper interfaces
๏ƒ˜ 2 1000BASE-X SFP slot interfaces
๏ฎ๎˜ƒ Power๎˜ƒover๎˜ƒEthernet
๏ƒ˜๎˜ƒ Complies๎˜ƒ with๎˜ƒ IEEE๎˜ƒ 802.3at๎˜ƒ Power๎˜ƒ over๎˜ƒ Ethernet๎˜ƒ Plus๎˜ƒ end-span๎˜ƒ
PSE
๏ƒ˜๎˜ƒ Up๎˜ƒ to๎˜ƒ 16๎˜ƒ ports๎˜ƒ of๎˜ƒ IEEE๎˜ƒ 802.3af/802.3at๎˜ƒ devices๎˜ƒ powered๎˜ƒ (ports๎˜ƒ
1~16)
๏ƒ˜ Supports PoE power up to 32 watts for each PoE port, with a total
PoE budget of 185W
๏ƒ˜๎˜ƒ Each๎˜ƒport๎˜ƒsupports๎˜ƒ54V๎˜ƒDC๎˜ƒpower๎˜ƒto๎˜ƒPoE๎˜ƒpowered๎˜ƒdevice
๏ƒ˜๎˜ƒ Auto๎˜ƒdetects๎˜ƒpowered๎˜ƒdevice๎˜ƒ(PD)
๏ƒ˜๎˜ƒ Supports๎˜ƒPD๎˜ƒalive๎˜ƒfunction
๏ƒ˜๎˜ƒ Circuit๎˜ƒprotection๎˜ƒprevents๎˜ƒpower๎˜ƒinterference๎˜ƒbetween๎˜ƒports
๏ƒ˜ Remote power feeding up to 100m in standard mode with 250m in
extend mode
๏ฎ Switching
๏ƒ˜ Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/
MDI-X
๏ƒ˜๎˜ƒ Supports๎˜ƒ IEEE802.3x๎˜ƒ ๎›€ow๎˜ƒ control๎˜ƒ in๎˜ƒ full-duplex๎˜ƒ mode๎˜ƒ and๎˜ƒ back-
pressure in half-duplex mode
๏ƒ˜ Integrates address look-up engine, supporting 8K absolute MAC
addresses
๏ƒ˜๎˜ƒ 9K๎˜ƒjumbo๎˜ƒframe๎˜ƒsupports๎˜ƒall๎˜ƒspeeds๎˜ƒ(10/100/1000Mbps)
1000BASE-X SFP
Slots 2
DIP Switch
Selectable operation mode
๏ƒ˜ Standard
๏ƒ˜ VLAN
๏ƒ˜ Extend
LED
๏ƒ˜ System:
๎˜ƒ๎˜ƒ๎˜ƒPower๎˜ƒ(Green)
๏ƒ˜ 10/100/1000T RJ45 Interfaces
๎˜ƒ๎˜ƒ๎˜ƒ10/100/1000๎˜ƒLNK/ACT๎˜ƒ(Green),
๎˜ƒ๎˜ƒ๎˜ƒPoE-in-Use๎˜ƒ(Amber)
๏ƒ˜ 1000X SFP Interfaces
๎˜ƒ๎˜ƒ๎˜ƒ1000๎˜ƒLNK/ACT๎˜ƒ(Green)
Dimensions
(W๎˜ƒx๎˜ƒD๎˜ƒx๎˜ƒH) 280๎˜ƒx๎˜ƒ180๎˜ƒx๎˜ƒ44๎˜ƒmm๎˜ƒ(1U๎˜ƒheight)
Enclosure Metal
Weight 1810g
Power Requirements 100~240V๎˜ƒAC,๎˜ƒ50/60Hz,๎˜ƒ5A๎˜ƒmax.
Power Consumption/
Dissipation Max. 201 watts/686 BTU
Thermal Fan 1
ESD Protection Contact๎˜ƒdischarge๎˜ƒof๎˜ƒยฑ6KV๎˜ƒDC,
Air๎˜ƒdischarge๎˜ƒof๎˜ƒยฑ8KV๎˜ƒDC
Surge Protection ยฑ6KV
Installation Desktop or rack-mount installation
Switching
Switch Architecture Store-and-Forward
Switch Fabric 40Gbps/non-blocking
Standards
Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE๎˜ƒ802.3z๎˜ƒGigabit๎˜ƒSX/LX
IEEE๎˜ƒ802.3x๎˜ƒ๎›€ow๎˜ƒcontrol๎˜ƒand๎˜ƒback๎˜ƒpressure
IEEE๎˜ƒ802.3af๎˜ƒPower๎˜ƒover๎˜ƒEthernet
IEEE๎˜ƒ802.3at๎˜ƒPower๎˜ƒover๎˜ƒEthernet๎˜ƒPlus
IEEE๎˜ƒ802.3az๎˜ƒEnergy-E๎ง’cient๎˜ƒEthernet
Environment
Operating
Temperature: 0 ~ 50 degrees C
Relative๎˜ƒHumidity:๎˜ƒ5~๎˜ƒ95%
(non-condensing)
Storage
Temperature: -10 ~ 70 degrees C
Relative๎˜ƒHumidity:๎˜ƒ5๎˜ƒ~๎˜ƒ95%
(non-condensing)
4. Hardware Introduction
4.1 Front Panel
The Front Panel of the 802.3at PoE+ Switch consists of 18 auto-sensing
10/100/1000Mbps Ethernet RJ45 ports and 2 1000BASE-X SFP slots.
The LED Indicators are also located on the front panel of the 802.3at
PoE+ Switch.
2 106 14 18 20
1 95 13 17 19
PoE Max
PWR
4 128 16
3 117 15
19 20
1000X SFP
Standard
VLAN
Ext end
PoE-in-Us e
LNK
ACT
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
Figure 4-1: GSD-2022P Switch Front Panel
4.3 Multiple Functions of DIP Switch
The๎˜ƒ front๎˜ƒ panel๎˜ƒof๎˜ƒ the๎˜ƒ 802.3at๎˜ƒ PoE+๎˜ƒSwitch๎˜ƒ provides๎˜ƒ one๎˜ƒ DIP๎˜ƒ switch๎˜ƒfor๎˜ƒ
Standard, VLAN or Extend mode selection. The detailed descriptions
are shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a general switch and all PoE
ports operate at 10/100/1000Mbps auto-
negotiation. All ports can communicate with
one another.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a switch andVLAN isolation
1.๎˜ƒ Ports๎˜ƒ1๎˜ƒto๎˜ƒ16๎˜ƒwill๎˜ƒisolate๎˜ƒrespectively.
2. Ports 1 to 16 can only communicate with
ports๎˜ƒ17~18๎˜ƒ(uplink๎˜ƒports)๎˜ƒand๎˜ƒSFP๎˜ƒports๎˜ƒ
19~20
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a Long Reach PoE switch and
1. Ports 1 to 8 support farthest transmission
distance of up to 250 meters
2.๎˜ƒ Ports๎˜ƒ1๎˜ƒto๎˜ƒ8๎˜ƒhave๎˜ƒa๎˜ƒdata๎˜ƒrate๎˜ƒof๎˜ƒ10Mbps
3. All ports can communicate with one
another.
Note
Please adjust the DIP switch before powering on the
802.3at PoE+ Switch.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Standard Mode (default)
Power
PoE IP Camera
PoE
100 meters (328 feet)
PoE
100BASE-TX UTP with PoE
GSD-2022P
Standard
VLAN
Extend
VLAN Isolation Mode
NVR
PC
Ports 1 to 16
Access Denied
PoE
PoE
PoE
PoE
100BASE-TX UTP with PoE
GSD-2022P
IP Camera
IP Camera
IP Camera
Ports 17~18 and SFP Ports 19~20
to Ports 1~16 Access Permitted
1000BASE-T UTP
Standard
VLAN
Extend
Extend Mode
Ports 1 to 8
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
GSD-2022P
Standard
VLAN
Extend
5. Hardware Installation
5.1 Rack Mounting
To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the
instructions described below.
Step 1:๎˜ƒ Place๎˜ƒ your๎˜ƒ 802.3at๎˜ƒ PoE+๎˜ƒ Switch๎˜ƒ on๎˜ƒ a๎˜ƒ hard๎˜ƒ ๎›€at๎˜ƒ surface,๎˜ƒ with๎˜ƒ
the front panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+
Switch with supplied screws attached to the package. Figure
5-1 shows how to attach brackets to one side of the 802.3at
PoE+ Switch.
210
614 18 20
19
513 17 19
PoE Max
PW R
4 12
816
311
715
19 20
100
0X S FP
Standa rd
VLA N
Ex
tend
PoE-in-Use
LNK
ACT
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
Figure 5-1: Attaching the Brackets to the 802.3at PoE+ Switch.
Caution
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws๎˜ƒwould๎˜ƒinvalidate๎˜ƒthe๎˜ƒwarranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the
opposite side.
4.4 Rear Panel
The rear panel of the 802.3at PoE+ Switch indicates an AC power
socket,๎˜ƒwhich๎˜ƒaccepts๎˜ƒinput๎˜ƒpower๎˜ƒfrom๎˜ƒ100๎˜ƒto๎˜ƒ240V๎˜ƒAC,๎˜ƒ50-60Hz,๎˜ƒ5A.
50/60Hz
100-240V , 5A max.
Figure 4-2: GSD-2022P Switch Rear Panel
๏ฎ AC Power Receptacle
Power
Notice
The๎˜ƒ device๎˜ƒ is๎˜ƒ a๎˜ƒ power-required๎˜ƒ device,๎˜ƒ which๎˜ƒ means๎˜ƒ
it will not work till it is powered. If your networks
should๎˜ƒ be๎˜ƒ active๎˜ƒ all๎˜ƒ the๎˜ƒ time,๎˜ƒ please๎˜ƒ consider๎˜ƒ using๎˜ƒ UPS๎˜ƒ
(Uninterrupted๎˜ƒ Power๎˜ƒ Supply)๎˜ƒ for๎˜ƒ your๎˜ƒ device.๎˜ƒ It๎˜ƒ will๎˜ƒ
prevent๎˜ƒyou๎˜ƒfrom๎˜ƒnetwork๎˜ƒdata๎˜ƒloss๎˜ƒor๎˜ƒnetwork๎˜ƒdowntime.
Power
Notice
In๎˜ƒ some๎˜ƒ areas,๎˜ƒ installing๎˜ƒ a๎˜ƒ surge๎˜ƒ suppression๎˜ƒ device๎˜ƒ may๎˜ƒ
also help to protect your 802.3at PoE+ Switch from being
damaged by unregulated surge or current to the 802.3at
PoE+ Switch or the power adapter.
Step 5: After the brackets are attached to the 802.3at PoE+ Switch,
use suitable screws to securely attach the brackets to the
rack, as shown in Figure 5-2.
2106 14 18
20
1 9
513 17
19
PoE Max
PW R
412
816
31
1
715
19 20
100
0X SFP
Stan dard
VLA N
Ext end Po E-in -Use
LN
K
ACT
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
Figure 5-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at
complied๎˜ƒPDs๎˜ƒand๎˜ƒother๎˜ƒnetwork๎˜ƒdevices.
A. Connect one end of a standard network cable to the
10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at
PoE+ Switch.
B.๎˜ƒ Connect๎˜ƒ the๎˜ƒother๎˜ƒend๎˜ƒof๎˜ƒ the๎˜ƒcable๎˜ƒ to๎˜ƒthe๎˜ƒnetwork๎˜ƒdevices๎˜ƒ such๎˜ƒas๎˜ƒ
printer๎˜ƒservers,๎˜ƒworkstations๎˜ƒor๎˜ƒrouters,๎˜ƒetc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall
outlet.
When๎˜ƒ the๎˜ƒ 802.3at๎˜ƒ PoE+๎˜ƒ Switch๎˜ƒ receives๎˜ƒ power,๎˜ƒ the๎˜ƒ power๎˜ƒ LED๎˜ƒ should๎˜ƒ
remain solid Green.
5.2 Installing the SFP Transceiver
The๎˜ƒ sections๎˜ƒ describe๎˜ƒ how๎˜ƒ to๎˜ƒ insert๎˜ƒ an๎˜ƒ SFP๎˜ƒ transceiver๎˜ƒ into๎˜ƒ an๎˜ƒ SFP๎˜ƒ slot๎˜ƒ
of the 802.3at PoE+ Switch.
The๎˜ƒSFP๎˜ƒtransceivers๎˜ƒare๎˜ƒhot-pluggable๎˜ƒand๎˜ƒhot-swappable.๎˜ƒYou๎˜ƒcan๎˜ƒplug๎˜ƒ
in๎˜ƒand๎˜ƒout๎˜ƒthe๎˜ƒtransceiver๎˜ƒto/from๎˜ƒany๎˜ƒSFP๎˜ƒport๎˜ƒwithout๎˜ƒhaving๎˜ƒ to๎˜ƒpower๎˜ƒ
down the 802.3at PoE+ Switch, as the Figure 5-3 shows.
MGB-Series
SFP Transceiver
LC Fiber Cable
1
2
Figure 5-3: Plug In the SFP Transceiver
๏ฎ Approved PLANET SFP Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-
mode๎˜ƒ SFP๎˜ƒ transceivers.๎˜ƒ The๎˜ƒ website๎˜ƒ link๎˜ƒ of๎˜ƒ approved๎˜ƒ PLANET๎˜ƒ SFP๎˜ƒ
transceivers๎˜ƒis๎˜ƒshown๎˜ƒbelow:
https://www.planet.com.tw/en/product/mgb-series-transceiver
Note
It is recommended to use PLANET SFP on the 802.3at
PoE+๎˜ƒ Switch.๎˜ƒ If๎˜ƒ you๎˜ƒ insert๎˜ƒ an๎˜ƒ SFP๎˜ƒ trans-ceiver๎˜ƒ that๎˜ƒ is๎˜ƒ not๎˜ƒ
supported,๎˜ƒthe๎˜ƒ802.3at๎˜ƒPoE+๎˜ƒSwitch๎˜ƒwill๎˜ƒnot๎˜ƒrecognize๎˜ƒit.
1. Before we connect the 802.3at PoE+ Switch to the other network
device,๎˜ƒ we๎˜ƒ have๎˜ƒto๎˜ƒ make๎˜ƒ sure๎˜ƒ both๎˜ƒsides๎˜ƒ of๎˜ƒthe๎˜ƒ SFP๎˜ƒ transceivers๎˜ƒ are๎˜ƒ
with the same media type, for example, 1000BASE-SX to 1000BASE-
SX; 1000BASE-LX to 1000BASE-LX.
2.๎˜ƒCheck๎˜ƒ whether๎˜ƒthe๎˜ƒ๎šฟber-optic๎˜ƒ cable๎˜ƒtype๎˜ƒmatches๎˜ƒ with๎˜ƒthe๎˜ƒSFP๎˜ƒ trans-
ceiver๎˜ƒrequirement.
๏ƒ˜๎˜ƒTo๎˜ƒ connect๎˜ƒ to๎˜ƒ 1000BASE-SX๎˜ƒ SFP๎˜ƒ transceiver,๎˜ƒ please๎˜ƒ use๎˜ƒ the๎˜ƒ
multi-mode๎˜ƒ ๎šฟber๎˜ƒ cable๎˜ƒ with๎˜ƒ one๎˜ƒ side๎˜ƒ being๎˜ƒ the๎˜ƒ male๎˜ƒ duplex๎˜ƒ LC๎˜ƒ
connector type.
๏ƒ˜๎˜ƒTo๎˜ƒ connect๎˜ƒ to๎˜ƒ 1000BASE-LX๎˜ƒ SFP๎˜ƒ transceiver,๎˜ƒ please๎˜ƒ use๎˜ƒ the๎˜ƒ
single-mode๎˜ƒ ๎šฟber๎˜ƒ cable๎˜ƒ with๎˜ƒ one๎˜ƒ side๎˜ƒ being๎˜ƒ the๎˜ƒ male๎˜ƒ duplex๎˜ƒ LC๎˜ƒ
connector type.
Customer Support
Thank you for purchasing PLANET products. You can browse our online
FAQ๎˜ƒ resource๎˜ƒ on๎˜ƒ PLANET๎˜ƒ Web๎˜ƒ site๎˜ƒ ๎šฟrst๎˜ƒ to๎˜ƒ check๎˜ƒ if๎˜ƒ it๎˜ƒ could๎˜ƒ solve๎˜ƒ your๎˜ƒ
issue. If you need more support information, please contact PLANET
support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Support team mail address
support@planet.com.tw
Copyright ยฉ PLANET Technology Corp. 2020
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Specyfikacje produktu

Marka: Planet
Kategoria: Schakelaar
Model: GSD-2022P

Potrzebujesz pomocy?

Jeล›li potrzebujesz pomocy z Planet GSD-2022P, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ…


Instrukcje Schakelaar Planet

Planet

Planet WGS-818HP Instrukcja

28 Sierpnia 2024
Planet

Planet IGS-500T Instrukcja

24 Sierpnia 2024
Planet

Planet GSD-504 Instrukcja

19 Sierpnia 2024
Planet

Planet GSD-2022P Instrukcja

18 Sierpnia 2024
Planet

Planet GSW-1820HP Instrukcja

15 Sierpnia 2024
Planet

Planet WGS-803 Instrukcja

4 Lipca 2024
Planet

Planet WGS-814HP Instrukcja

3 Lipca 2024

Instrukcje Schakelaar

Najnowsze instrukcje dla Schakelaar

StarTech.com

StarTech.com SV221DVI Instrukcja

19 Wrzeล›nia 2024
StarTech.com

StarTech.com SV565FXHD4KU Instrukcja

19 Wrzeล›nia 2024
StarTech.com

StarTech.com SV431DD2DUA Instrukcja

19 Wrzeล›nia 2024
ATen

ATen CE610-AT-E Instrukcja

19 Wrzeล›nia 2024
ATen

ATen KA7240S Instrukcja

19 Wrzeล›nia 2024
Lindy

Lindy 38155 Instrukcja

19 Wrzeล›nia 2024
ATen

ATen VS0801H Instrukcja

19 Wrzeล›nia 2024
ATen

ATen KE9950 Instrukcja

19 Wrzeล›nia 2024
OSD Audio

OSD Audio SSVC4 Instrukcja

18 Wrzeล›nia 2024
ATen

ATen CS1794 Instrukcja

18 Wrzeล›nia 2024