Instrukcja obsługi Planar PS5074K

Planar monitor PS5074K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planar PS5074K (62 stron) w kategorii monitor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/62

Planar PS Series 4K Displays User Manual

020-1384-00A

User Manual

Page | 1

Planar PS Series 4K Displays

PS5074K

PS5074KT

PS5574K

PS5574KT

PS6574K

PS6574KT

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 2

This document may not be copied in any form without permission from Leyard or Planar. Information

in this document is subject to change without notice.

Trademark Credits

Windows™ is a trademark of Microsoft Corp.

All other companies are trademarks or registered trademarks of their respective companies.

Disclaimer

The information contained in this document is subject to change without notice. Leyard and Planar

Systems, Inc. makes no warranty of any kind with regard to this material. While every precaution has

been taken in the preparation of this manual, the Company shall not be liable for errors or omissions

contained herein or for incidental or consequential damages in connection with the furnishing,

performance, or use of this material.

Warranty and Service Plans

Planar warranty and service plans will help you maximize your investment by providing great support,

display uptime, and performance optimization. From post-sale technical support, to a full suite of

depot services, our services are performed by trained employees. When you purchase a Planar

product, you get more than a display; you get the service and support you need to maximize your

investment. To find the latest warranty and service information regarding your Planar product, please

visit http://www.planar.com/support or http://www.leyard.com/en/support/

Part Number: - 84- A 020 13 00

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 3

Table of Contents

Introduction ............................................................................................................................. 5

1. Safety Information .............................................................................................................. 6

2. Safety Precautions ............................................................................................................. 6

2 Important Safety Instructions: .1 ................................................................................... 7

3. Recommended Usage ....................................................................................................... 8

3.1 Burn-In Versus Temporary Image Retention 8 ............................................................

3.2 Warranty Coverage .................................................................................................. 8

3.3 Important Waste Disposal Information ...................................................................... 9

3.4 Normal Usage Guidelines ......................................................................................... 9

4. VESA Mounts, General Description ................................................................................. 10

5. Cleaning the Display ........................................................................................................ 11

Package Contents ................................................................................................................ 12

6. Installing the Cable Clips ................................................................................................. 14

7. Standard Inputs ............................................................................................................... 15

Installing the Display ................................................................................................................. 16

8. Before You Begin ............................................................................................................. 16

8.1 Tools/Equipment List ...............................................................................................16

8.2 Other Things You May Need ...................................................................................16

8.3 Plan Your Installation ...............................................................................................16

8.4 Prepare Your Installation Location ...........................................................................17

8.5 Cable Length Recommendations ............................................................................17

Operating the Display .......................................................................................................... 18

9. OSD Keypad .................................................................................................................... 18

10. Remote Control Receiver ................................................................................................. 19

11. Installing IR Extender ....................................................................................................... 20

12. LED Indicators ................................................................................................................. 21

13. Using the Display in Portrait Mode ................................................................................... 22

14. Using the Display in Flat or Tilted Orientation .................................................................. 22

15. Using the Touch Screen ..................................................................................................23

16. Using the Remote Control ................................................................................................ 24

16.1 Locking/Unlocking the OSD Menus ..................................................................27

17. Basic Remote Functions .................................................................................................. 28

17.1 Turning the Display On .....................................................................................28

17.2 Turning the Display Off .....................................................................................28

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 4

17.3 Adjusting the Volume .......................................................................................28

17.4 Selecting the Input Source ...............................................................................28

17.5 Navigating Through the Menus .........................................................................28

18. Input Menu ....................................................................................................................... 29

19. Picture Menu ................................................................................................................... 30

19.1 Picture M Color Control Submenu enu –...........................................................32

20. Audio Menu ..................................................................................................................... 33

21. OSD Settings Menu ......................................................................................................... 34

22. Setup Menu ..................................................................................................................... 36

23. Advanced Setup Menu .....................................................................................................40

24. Communication Menu ...................................................................................................... 42

2 Information Menu 5. ............................................................................................................. 45

26. OSD Android Settings Menu ............................................................................................ 46

26.1 Android Main Menu ..........................................................................................46

26.2 Apps .................................................................................................................47

26.3 Storage ............................................................................................................47

External Control.................................................................................................................... 48

Signal Compatibility ............................................................................................................49

Color Subsampling Support .............................................................................................. 51

Specifications ....................................................................................................................... 52

Dimensions ............................................................................................................................ 54

PS5074K ......................................................................................................................... 54

PS5074KT ....................................................................................................................... 55

PS5574K ......................................................................................................................... 56

PS5574KT ....................................................................................................................... 57

PS6574K ......................................................................................................................... 58

PS6574KT ....................................................................................................................... 59

Troubleshooting ................................................................................................................... 60

Accessing the Planar Technical Support Website ........................................................ 61

Index ....................................................................................................................................... 62

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 5

Introduction

The Planar® PS Series 4K line of TAA-compliant large format LCD displays is designed for

digital signage applications. From static content viewing to content interaction, Planar PS Series

4K displays have you covered for a variety of retail, corporate or museum applications.

Available in 50", 55" and 65", the models feature narrow, logo-free bezels, slim profiles and 500-

nit range brightness, delivering sleek looks and beautiful image quality. With an embedded

Android® operating system, each model is capable of supporting cloud-based digital signage

applications. With embedded WiFi, there’s no need to physically connect the display to a

network, so it can be installed wherever needed. For interactive content, multi-touch models are

also available.

Each Planar PS Series 4K display is excellent for 24x7 operation and supports either landscape

or portrait oriented mounting. Planar PS Series 4K displays deliver vibrant ultra-high definition

images and messages that captivate the attention of any audience.

Caution: This manual is intended for use by qualified service persons and end users with

experience installing LCD displays.

Introduction

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 6

1. Safety Information

Before using th Planar PS Series 4K, please read this manual thoroughly to help protect e

against damage to property, and to ensure personnel safety.

• Be sure to observe the following instructions.

• For your safety, be sure to observe ALL the warnings detailed in this manual.

• For installation or adjustment, please follow this manual’s instructions, and refer all

servicing to qualified service personnel.

2. Safety Precautions

• If water is spilled or objects are dropped inside the display, remove the power plug

from the outlet immediately. Failure to do so may result in fire or electrical shock. Contact

your dealer for inspection.

• If the display is dropped or the chassis is damaged, remove the power plug from the

outlet immediately. Failure to do so may result in fire or electrical shock. Contact your

dealer for inspection.

WARNING! Wall mounts must be secure.

• If the display is hung on a wall, the wall must be strong enough to hold it. Simply

mounting it to wallboard or wall paneling won’t be adequate or safe.

Caution: The screen could be damaged by heavy pressure.

• Slight pressure on the LCD will cause distortion of the image. Heavier pressure will

cause permanent damage. Displays should be mounted where viewers cannot touch the

screen or insert small objects in the openings that will create hazards by contacting bare

conductive parts.

Caution: The front polarizer is soft and subject to scratches from sharp objects.

• The polarizer is a thin sheet of film laminated to the outside layer of glass on the LCD

screen. Take care when handling items near the screen.

• If the power cord or plug is damaged or becomes hot, turn off the main power switch

of the display. Make sure the power plug has cooled down and remove the power

plug from the outlet. If the display is still used in this condition, it may cause a fire or an

electrical shock. Contact your dealer for a replacement.

Introduction

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 7

2.1 Important Safety Instructions:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use the display near water.

6. Clean the LCD screens with an LCD screen cleaner or LCD wipes.

7. Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce heat.

8. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades

and a third grounding prong. The wide blade or the third prong is provided for your

safety. When the provided plug does not fit into your outlet, consult an electrician for the

replacement of the obsolete outlet.

9. otect the power cord from being walked on or pinched, particularly at plugs, Pr

convenience receptacles and the point where they exit from Planar large format any

LCD display.

10. Only use the attachments/accessories specified by the manufacturer.

11. Unplug all displays during lightning storms or when unused for long periods of time.

12. In instances where a power surge has occurred and a display no longer has an image,

the display power will need to be reset.

13. You must follow all National Electrical Code regulations. In addition, be aware of local

codes and ordinances when installing your system.

14. Refer all servicing to qualified service personnel. Servicing is required when any of the

displays have been damaged in any way, such as the AC power cord or plug is

damaged, liquid has been spilled or objects have fallen into a product, the products have

been exposed to rain or moisture, do not operate normally or have been dropped.

15. Keep the packing material in case the equipment should ever need to be shipped.

16. Wall mounts must be secure. The wall must be strong enough to hold displays brackets,

cables and accessories. Seismic engineers should be consulted in areas prone to

earthquakes.

17. Slight pressure on the LCD will cause distortion of the image. Heavier pressure will

cause permanent damage. Displays should be mounted where viewers cannot touch the

screen or insert small objects in the openings that will create hazards by contacting bare

conductive parts.

18. The front polarizer is soft and subject to scratches from sharp objects. T polarizer is a he

thin sheet of film laminated to the outside layer of glass on the LCD screen. Take care

when handling items near the screen.

19. Caution: There is a risk of explosion if the battery is replaced with incorrect type.

Dispose of used batteries cording to local regulations. ac

Introduction

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 8

3. Recommended Usage

In order to get the most out of your LCD, use the following recommended guidelines to optimize

the display.

3.1 Burn-In Versus Temporary Image Retention

Burn-in causes the screen to retain an image essentially forever, with little or no way to correct

the problem. Under normal use, an LCD will not experience burn-in, as plasma displays do, nor

will it retain images in any way.

Normal use of an LCD is defined as displaying continuously changing video patterns or images.

However, LCDs can experience image retention when recommended usage temporary

guidelines are not followed.

What is Temporary Image Retention?

Temporary image retention (TIR) can occur when a static image is displayed continuously for

extended periods of time (12 hours or longer). An electrical charge differential may build up

between the electrodes of the liquid crystal, which causes a negative-color video image (color-

inverted and brightness-inverted version of the previous image) to be retained when a new

image is displayed. This behavior is true for any LCD device from any LCD manufacturer.

TIR is not covered under warranty. See standard warranty terms and conditions for details. Here

are some guidelines to help you avoid TIR:

• Use the LCD to show a screen saver, moving images or still pictures that change

regularly. When using high-contrast images, reposition the images frequently.

• Turn off the LCD when it is not in use. To use your source computer’s Power Options

Properties, set up your computer to turn off the display when not in use.

3.2 Warranty Coverage

The following models are warranted for usage: 24 x 7

• PS5074K, PS5074 50”: KT

• PS5574K, PS5574KT 55”:

• PS6574K, PS6574KT 65”:

Planar recommends turning off the power for 4 hours per day for optimal performance.

For complete warranty details, please visit www.planar.com/warranty.

Introduction

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 9

3.3 Important Waste Disposal Information

Please recycle or dispose of all electronic waste in accordance with local, state, and federal

laws. Additional resources can be found online at http://www.planar.com/about/green/.

The crossed-out wheelie bin symbol is to notify consumers in areas subject to Waste Electrical

and Electronic Equipment (WEEE) Directive 2012/19/EU that the product was placed on the

market after August 13, 2005 and must not be disposed of with other waste. Separate collection

and recycling of electronic waste at the time of disposal ensures that it is recycled in a manner

that minimizes impacts to human health and the environment. For more information about the

proper disposal of electronic waste, please contact your local authority, your household waste

disposal service, or the seller from whom you purchased the product.

3.4 Normal Usage Guidelines

Normal use of the LCD is defined as operating in the open air to prevent heat buildup, and

without direct or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight

that can cause the modules to experience high operating temperatures. For all modules, do not

block fans or ventilation openings. If the LCD module will be installed in a recessed area with an

LCD surround or enclosure, ensure adequate openings are applied for proper air flow and

ventilation.

At 3000 meters or below, the maximum ambient operating temperature for the LCD module

cannot be above 40º C nor below the minimum ambient operating temperature of 0º C. If one of

these conditions exists, it is up to the installer to ensure that module placement is changed,

thermal shielding is provided and/or additional ventilation is provided to keep the display within

its nominal operating parameters.

Cooling Requirements

For optimal performance, active cooling by the installer should be planned for when the ambient

temperature at the top of the wall is predicted to be above the specified ambient temperature for

the panel. Cooling may be done behind the displays and depending on the wall configuration.

Introduction

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 10

4. VESA Mounts, General Description

VESA mounts are used to secure the Planar PS Series 4K Display. The display can be installed

using a variety of VESA mounts available through Planar. If you do not have a VESA mount,

and would like to purchase one, contact Planar.

If you purchased a VESA mount, you should have a received a separate box with mounting

supplies and an installation manual. Follow these instructions carefully.

Caution: Shorter screws will result in insufficient mounting strength and longer screws could

puncture parts inside the display. The device may fall, causing serious personal injury or death.

To prevent injury, this device must be securely attached to the wall in accordance with the

installation instructions supplied with the mount. The mount must be secured to the VM Series

display using the four M6x1.0 VESA mounting locations, and 5mm - 10mm thread engagement

is required for secure mounting. Select the correct screw/spacer combination for the mount.

• Prior to installation, make sure you know where all of the mounting points are located.

• Follow all safety precautions outlined in the VESA Installation manual.

• Verify the parts received with the list shown in the VESA Installation manual.

Introduction

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 11

5. Cleaning the Display

If dust collects on the power plug, remove the plug from the outlet and clean off the dust. Dust

build-up may cause a fire.

Remove the power plug before cleaning. Failure to do so may result in electrical shock or

damage.

Keep the following points in mind when cleaning the surface of the display:

• When the surface of the display becomes dirty, wipe the surface lightly with a soft clean

cloth.

• If the surface requires additional cleaning, use LCD screen cleaner or LCD wipes, which

are available at most electronics stores.

• Do not let cleaner seep into the display, as it may cause electrical shock or damage.

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 12

Package Contents

Part

Description

Number

Picture

LCD Display

One per box.

HDMI Cable

HDMI cable.

AC Power

Cord (US)

Power cord

( ) US

AC Power

Cord (EU)

Power cord

(EU)

IR Extender

Cable

Receive

signals from

the remote

control.

Package Contents

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 13

Part

Description

Number

Picture

USB Cable

Connects to a

PC for touch

functionality

(touch models

only).

Remote

Control

Used to control

the display

(AAA batteries

included)

Cable Clips

Used to clamp

and organize

the cables.

Wi-Fi

Antenna

2.4G 2dBi

Dipole

Antenna

Quick Start

Guide

Quick start

guide.

Package Contents

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 14

6. Installing the Cable Clips

Use the cable clips included in the Accessory Kit to assist with cable management. These clips

snap into place in the locations shown in the image below.

Package Contents

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 15

7. Standard Inputs

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 16

Installing the Display

This section explains how to install your display. We suggest that you read the entire section

before you attempt to install the unit.

8. Before You Begin

Make sure you have all the items in these lists before you begin unpacking and installing your

display(s).

8.1 Tools/Equipment List

Depending on your installation, you may need one or more of the following items:

• String/string level

• Digital/laser level

• Ladders/lift

• Back brace

• Stud finder (if hanging display on a wall)

8.2 Other Things You May Need

• LCD screen cleaner or LCD wipes - available at most electronics stores

• At least two very strong people to help lift unit into place

8.3 Plan Your Installation

You should have a detailed plan of how the units are to be configured. The plan should include

calculations for the following:

• Power maximums reference below by display size:

。 PS5074K(T): 8 units max per 20A circuit for 115V operation

。 PS5574K(T): 6 units max per 20A circuit for 115V operation

。 PS6574K(T): 8 units max per 20A circuit for 115V operation

• Cable runs

• Ventilation and cooling requirements

• If hanging display on a wall, location of studs in the wall

Installing the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 17

8.4 Prepare Your Installation Location

Prepare the area where you will install the unit. If custom enclosures are part of the installation,

they must be fully designed to accommodate the installation of the displays, the installed units,

and ventilation and cooling requirements.

If your installation includes a lot of construction or dust, it is highly recommended that you

clean all of the screens after the wall installation and configuration are complete.

8.5 Cable Length Recommendations

Cable length performance may vary between different cables and sources. The recommended

maximum cable lengths are as follows:

HDMI

• 4K @ 50/60Hz: 5m (15 ft) maximum

• 4K @ 24/25/30Hz: 15m (50 ft) maximum

• 1080p @ 60Hz and lower resolutions: 20m (65 ft) maximum

DisplayPort

• 8m (25 ft) maximum

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 18

Operating the Display

9. OSD Keypad

The OSD keypad is located on the left side of the display.

OSD Keypad Buttons

Key

Descriptions

POWER

Power on / Power off





Menu Down





Menu Up

−

Menu Left / Decrease value / Volume -

Menu Right / Increase value / Volume +

SOURCE

Source Selection

M ENU

Menu Open / Close

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 19

10. Remote Control Receiver

The remote control receiver is located on a module on the rear side of the display. Pull down

the module to provide front facing sensor visibility. See the drawing below for reference. Use

the IR extender cable to improve remote control distance and angular performance.

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 20

11. Installing IR Extender

The position of the IR extender will affect the reception of the IR signal. To ensure the best IR

reception, P1 and P2, the two positions marked in the figure below, are recommended for

installing the IR extender.

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 21

12. LED Indicators

The LED indicator light is located the bottom left side of the display. The following table explains at

what the different colors and blink patterns mean.

LED On

Power Status

Condition

Green

Power on; Normal operation

Red

Power save mode

Power off

Off

AC off

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 22

13. Using the Display in Portrait Mode

When using the display in the portrait position and looking at the rear of the display, it should be

rotated according to the arrow stickers on the back of the display. This will allow for proper ventilation.

Then select the OSD rotation of landscape or portrait on the OSD menu (MAIN MENU > OSD

SETTINGS > OSD ROTATION).

For reference, the following list indicates the rotation direction of each display model when placed in

portrait mode:

• PS5074K(-T): Counterclockwise

• PS5574K(-T): Counterclockwise

• PS6574K(-T): Counterclockwise

Caution: Improper ventilation may shorten the life of the display

14. Using the Display in Flat or Tilted Orientation

The display is not recommended for use in flat orientation for tabletop, floor, or ceiling installations.

LCD panels of this size are at risk of panel deflection, which can cause cosmetic sagging, brightness

uniformity issues, and a shortened life span. Installations where the display is tilted downward or

upward at an angle may also be prone to these issues and are not recommen ded.

Note: Failure to follow these instructions will void the warranty.

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 23

15. Using the Touch Screen

You can use the touch screen to control your Windows, Mac or Linux operating system. The Planar

PS Series is HID compliant, delivering up to 20 points of touch on both Windows and Linux 4K

without a driver. Single touch only is supported for Mac operating systems. To achieve more than

single touch Mac support, drivers will need to be installed, which can be found on

http://www.planar.com/support/.

Note: Ensure that you have installed the USB cable on the display to a computer.

Note: The menu system is connected internally to the touch system and can be controlled in this

manner. This behavior is configurable via the Touch ntrol setting. Co

Note: When using the passive stylus on the touch screen, make sure to follow the instructions shown

in the picture below:

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 24

16. Using the Remote Control

Below is a picture of the remote control and its corresponding Hex codes.

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 25

IR Remote Key Codes

Key Name

Address

Data

NEC Data

Description

POWER

2295

215

0x08F7D728

Power toggle

MUTE

2295

223

0x08F7DF20

Audio mute

2295

149

0x08F7956A

Number 1

2295

153

0x08F79966

Number 2

2295

157

0x08F79D62

Number 3

2295

214

0x08F7D629

Number 4

2295

218

0x08F7DA25

Number 5

2295

222

0x08F7DE21

Number 6

2295

150

0x08F79669

Number 7

2295

154

0x08F79A65

Number 8

2295

158

0x08F79E61

Number 9

2295

217

0x08F7D926

Number 0

ZZZ

2295

213

0x08F7D52A

Sleep mode toggle

2295

221

0x08F7DD22

Not used

DISPLAY

2295

138

0x08F78A75

Source Information

PMODE

2295

194

0x08F7C23D

Picture Mode

SMODE

2295

193

0x08F7C13E

Sound Mode

INPUT

2295

195

0x08F7C33C

Source selection

AUTO

2295

219

0x08F7DB24

Auto adjust on VGA

2295

146

0x08F7926D

Navigate up

LEFT

2295

151

0x08F79768

Navigate left

ENTER

2295

155

0x08F79B64

Selects the current menu item

RIGHT

2295

159

0x08F79F60

Navigate right

DOWN

2295

216

0x08F7D827

Navigate down

2295

212

0x08F7D42B

Opens the menu

EXIT

2295

220

0x08F7DC23

Exits the menu

VOL +

2295

131

0x08F7837C

Volume increase

VOL -

2295

134

0x08F78679

Volume decrease

ASPECT

2295

130

0x08F7827D

Aspect ratio toggle

FREEZE

2295

129

0x08F7817E

Freezes the current input source

ROOT

2295

192

0x08F7C03F

Return to Android

CH +

2295

128

0x08F7807F

Not used

CH -

2295

142

0x08F78E71

Not used

FAV

2295

207

0x08F7CF30

Not used

FAV -

2295

206

0x08F7CE31

Not used

FAV +

2295

205

0x08F7CD32

Not used

GOTO

2295

204

0x08F7CC33

Not used

[Red]

2295

211

0x08F7D32C

Red button (function varies)

[Green]

2295

210

0x08F7D22D

Green button (function varies)

[Yellow]

2295

209

0x08F7D12E

Yellow button (function varies)

[Blue]

2295

208

0x08F7D02F

Blue button (function varies)

2295

203

0x08F7CB34

Rewind content to the beginning

2295

202

0x08F7CA35

Fast forward content to the end

REPEAT

2295

201

0x08F7C936

Repeat content

A-B

2295

200

0x08F7C837

Not used

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 26

IR Remote Key Codes

Key Name

Address

Data

NEC Data

Description

▶||

2295

199

0x08F7C738

Play or pause content

◼

2295

198

0x08F7C639

Stop content

⏪

2295

197

0x08F7C53A

Rewind content

⏩

2295

196

0x08F7C43B

Fast forward content

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 27

16.1 Locking/Unlocking the OSD Menus

You can lock or unlock the OSD menus by pressing a series of key commands on the remote control.

To lock the menu, press the following keys on the remote in the order listed: ENTER, ENTER, EXIT,

EXIT, ENTER and EXIT. To unlock it, simply follow the same sequence.

Depending on whether you locked or unlocked the menu, you will see one of the following messages

on the screen.

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 28

17. Basic Remote Functions

17.1 Turning the Display On

1. Insert the power cord into the display and into the power outlet.

2. Ensure the AC switch is set to “—“.

3. Press the power button on the remote or keypad.

17.2 Turning the Display Off

With the power on, press the power button on the remote or keypad to put the LCD panel in a

standby mode. To turn off power completely, turn the AC switch to “O” or disconnect the AC power

cord from the power outlet.

Note: If there is no signal for a certain period of time, the LCD panel will automatically go into standby

mode.

17.3 Adjusting the Volume

1. Using the remote, press the VOL- or VOL+ to increase or decrease the volume.

2. Pressing the MUTE button temporarily turns off all sound. To restore the sound, press the

MUTE button again.

Note: The analog audio out is variable. S/PDIF is fixed.

17.4 Selecting the Input Source

Press the INPUT button on the remote or press the Source button on the keypad. Use the arrow

buttons to select one of the following input sources: DP, HDMI1, HDMI2, VGA, Android, ( )and

press ENTER:

Note: When the display cannot find a source, a “No signal” message will appear.

17.5 Navigating Through the Menus

1. With the power on, press MENU. The main menu appears.

2. Within the menu, use ,  , , , and ENTER to navigate through the menus and

adjust options.

3. Press MENU to return to the previous menu. To exit the menu system, press EXIT.

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 29

18. Input Menu

Below are the menus used for selecting the input sources for all models:

Main Input

 Select the input source

 VGA, HDMI1, HDMI2, Android Web Browser Options: DP, ,

 HDMI1 Default:

Auto Scan

 Select to scan inputs in order until a valid signal is detected. Continue scanning when the

signal on the selected input is lost.

 On, Off Options:

 Off Default:

Aspect Ratio

 Adjust the aspect ratio of the screen.

 Full Screen, Letterbox, 4:3, Native Options:

 Full Screen Default:

Power On Input

 Select the input source to be displayed at power up. Selecting Last Input will cause the

last selected input to be used as the power up source.

 Last Input, VGA, HDMI 1, HDMI 2, DP, Android, Web Browser Options:

 Last Input Default:

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 30

19. Picture Menu

This menu is used for making common image adjustments.

Scheme

 Press or to select one of the following:

 Standard, Soft, User, Vivid, Natural, Sports Options:

 Standard Default:

Contrast

 Increase or decrease the contrast of picture. Press or to select the desired level.  

 0~100 Range:

 Default: 50

Brightness

 Increase or decrease the brightness of picture. Press  or to select the desired level. 

 0~100 Range:

 Default: 50

Sharpness

 Adjust the definition of picture. Press or to select the desired level.  

 0~100 Range:

 50 Default:

Hue

 Increase or decrease the green hue. Press or to select the desired level.  

 0~100 Range:

 Default: 50

Saturation

 Adjust the brilliance and brightness. Press or to select the desired level.  

 0~100 Range:

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 31

 Default: 50

Backlight

 Increase or decrease the intensity of the LCD backlight. Press or  to select the desired

level.

 ~100 Range: 15

 Default: 80

Gamma

 Select gamma

 Off, 1.85, 1.9, 1.95, 2.0, 2.05, 2.10, 2.15, 2.2, 2.25, 2.3, 2.35, 2.4, 2.45, 2.5, 2.55, Options:

2.6

 2.2 Default:

Color Temperature

 Select color temperature

 User, 3200K, 5000K, 6500K, 7500K, 9300K Options:

 K Default: 9300

Overscan

 Adjust the zoom (overscan) of the image

 0~10 Options:

 0 Default:

HDMI Color Range

 Select RGB range for HDMI and DisplayPort sources

 Auto, 0~255, 16~235 Options:

 16~235 Default:

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 32

19.1 Picture Menu Color Control Submenu –

Note: Certain settings are only available in later versions of firmware. Please upgrade to the latest

firmware version if unsupported settings are encountered.

Red Gain

 Adjust the amount of red in bright content

 0~10 Range: 24

 5 Default: 12

Green Gain

 Adjust the amount of green in bright content

 0~10 Range: 24

 5 Default: 12

Blue Gain

 Adjust the amount of blue in bright content

 0~10 Range: 24



Default: 512

Red Offset

 Adjust the amount of red in dark content

 0~1024 Range:

 5 Default: 12

Green Offset

 Adjust the amount of green in dark content

 0~10 Range: 24

 5 Default: 12

Blue Offset

 Adjust the amount of blue in dark content

 0~10 Range: 24

 5 Default: 12

Operating the Display

Planar PS Series 4K Displays User Manual

020-1384-00A

Page | 33

20. Audio Menu

This menu is used for adjusting audio settings.

Volume

 Adjust the sound. Press or to select the desired level.  

 0~100 Range:

 Default: 35

Treble

 Adjust the sound in high tones (treble). Press or to select the desired level.  

 - Range: 50 50~+

 0 Default:

Bass

 Adjust the sound in low tones (bass). Press or to select the desired level.  

 - Range: 50 50~+

 0 Default:

Balance

 Adjust the balance of the left and right speakers. Press or to select the desired level.  

 - Range: 50 50~+

 0 Default:

Speaker

 Turn the speaker on or off

 On, Off Options:

 Default: On

Audio Source

 Select the audio source that is played through the display’s internal speakers, audio out and

digital audio out.

 Default, Audio In Options:

 Default Default:

Specyfikacje produktu

Marka:	Planar
Kategoria:	monitor
Model:	PS5074K
Kolor produktu:	Czarny
Materiał obudowy:	Plastik
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	655.8 mm
Szerokość produktu:	1132.6 mm
Głębokość produktu:	69.9 mm
Waga produktu:	13000 g
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	20 W
Certyfikaty:	FCC, CE, cTUVus
Port USB:	Nie
Typ HD:	4K Ultra HD
Długość przekątnej ekranu:	50 "
Klasa efektywności energetycznej (stara):	A
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	20 - 85 %
Rozdzielczość:	3840 x 2160 px
Współczynnik kontrastu (typowy):	4000:1
Natywne proporcje obrazu:	16:9
Ekran dotykowy:	Tak
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Skrócona instrukcja obsługi:	Tak
Przewody:	AC, HDMI, IR
Pobór mocy w trybie czuwania:	0.5 W
Przewodowa sieć LAN:	Tak
Pobór mocy:	115 W
Zakres temperatur (przechowywanie):	-20 - 60 °C
Zainstalowany system operacyjny:	Android 6.0
Ilość portów HDMI:	2
Złącze RS232:	Tak
Ilość DisplayPort:	1
Technologia wyświetlacza:	LCD
Maksymalna częstotliwość odświeżania:	60 Hz
Kąt widzenia (poziomy):	178 °
Kąt widzenia (pionowy):	178 °
Kolory wyświetlacza:	1.073 billionów kolorów
Czas odpowiedzi (typowy):	8 ms
Rozmiar plamki:	0.2854 x 0.2854 mm
Standard VESA:	Tak
Interfejs do montażu panelu:	400 x 400 mm
Wersja HDMI:	2.0
HDCP:	Tak
Jasność:	550 cd/m²
Ilość wbudowanych glosników:	2
Paleta barw:	72 %
Długość przekątnej ekranu (cm):	127 cm
Wbudowany tuner tv:	Nie
Zdalne wejście IR:	1
Obsługiwane tryby wideo:	480p, 576p, 720p, 1080i, 1080p
Port DVI:	Nie
Pełny HD:	Tak
Wejście audio dla PC:	Tak
Emisja ciepła:	393 BTU/h
Port podczerwieni:	Tak
Głębia kolorów:	10 bit
Typ podświetlenia LED:	Direct-LED
Orientacja:	Poziomy/Pionowy
Wejścia VGA (D-Sub):	1
PC Audio out:	Tak
Ilość symultanicznych punktów dotyku:	20
Żywotność panelu:	30000 h
Aktywna powierzchnia ekranu (szer x wys.):	1095.8 x 616.4 mm
Wejście DisplayPort:	1
Multi-touch:	Tak
Minimalna częstotliwość odświeżania:	24 Hz
Działanie 24h:	Tak