Instrukcja obsługi Pioneer Elite S-IW891

Pioneer głośnik Elite S-IW891

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer Elite S-IW891 (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Operating Instructions
Mode d’emploi
In-Wall Speaker/Enceinte murale encastrable
2
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe place for future reference.
Introduction
This speaker system is designed for in-wall installation.
The design features provide for a wide range of
placement and listening position options.
This speaker system is designed with CST (Coherent
Source Transducer) technology to assure excellent
sound quality. CST sound delivery is extremely smooth
and coherent. All sound - direct and reflected - arrives at
the listening position with matched timbre.
This speaker system is also paintable so that they may be
matched to your room decor.
Before you start
• The nominal impedance of this speaker system is
6 Ω. Connect the speaker system to an amplifier
capable of driving an impedance of at least 6 Ω.
This product incorporates auto-resetting overload
protection technology to help avoid damage to the
speakers. However, please observe the following
precautions:
• Do not supply amplification power to the speaker
system in excess of the maximum permissible
input, which could damage the speaker and cause
a hazard from overheating.
• If using a graphic equalizer to boost sounds in the
high-frequency range, do not use excessive
amplifier volume.
• Do not try to force a low-powered amplifier to
produce high sound levels as the amplifier’s
harmonic distortion will be increased, and you may
damage the speaker.
Caution: installation
• Pioneer is not responsible for any accidents or
damage that result from improper installation,
misuse, modification of the product, or natural
disasters.
• This speaker system must be installed by a qualified
technician as it involves such tasks as selecting a
location for installation, drilling holes in walls/ceiling,
wiring, and painting. Have the installer carefully
follow the installation instructions.
• The installation technician must follow professional
installation techniques to protect the speaker system
against falling.
• When installing the speakers, make sure that the
wall/ceiling is strong enough to support the
speakers.
• Improper installation of the speakers could cause
them to fall and cause damage or injuries to persons
nearby.
• Switch off and unplug your AV equipment and
consult the instructions when connecting up
components. Make sure you use the correct
connecting cables.
• Keep magnetic objects such as screwdrivers or steel
parts away from the tweeter and midrange speakers.
Since the speakers use strong magnets, the objects
may be attracted, causing injury or damaging the
diaphragm.
• Do not install the speakers where they will be in direct
sunlight, and avoid positioning them near heaters
and air conditioners. This may cause warping and
discoloration of the speaker and damage to the
speakers.
• This speaker system is designed for home use only.
To avoid electric shock hazard, do not place them
outside, or in an overly humid area.
• This speaker system is heavy, and should be handled
with caution by two or more people.
Caution: in use
• If the speakers stop emitting sound after receiving
too large an input signal, turn down the volume
control on the amplifier and wait a few seconds. The
protection feature will be reset automatically.
For U.S. model
WARNING:
Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
D36-P4_A_En
Wash hands after handling
English
3
En
What’s in the box
Installation
Standard surround setup
Sounds reproduced through speaker systems are easily
affected in subtle ways by the conditions in the listening
space. To assure optimum performance from this
speaker system, give adequate consideration to the
installation location before setup.
Use the graphic below as a guide to determine optimal
speaker placement.
• Place the left and right speakers equal distances
from your listening position for good stereo imaging.
Use speaker cables of the equal length for each
speaker.
• Keep the speaker system at least 50 cm (20 in.) away
from the edge of the wall or ceiling. If this is not
possible, adjust the sound balance by using the
speakers’ treble level control.
• This speaker system is not magnetically shielded. It
should therefore not be placed near TVs or monitors
that are sensitive to magnetic fields, as the
interaction of magnetic materials can cause
distortion of the colors on your TV screen. Magnetic
storage media (such as floppy discs and tape or video
cassettes) should also not be kept close to this
speaker system.
For the installer
• Give adequate consideration to the location of
installation before the setup of this speaker system.
• Check the walls/ceiling to see if they are strong
enough to withstand the weight of the speaker
system.
• Installation is possible on walls from 16 mm (5/8 in.)
to 25 mm (1 in.) thick.
• Check the walls/ceiling to confirm there is no wiring,
plumbing, beams, studs or air conditioning systems
that may interfere with installation.
• Pioneer disclaims any liability whatsoever for
damage resulting from assembly, improper
mounting, insufficient reinforcement, misuse of the
product, acts of nature, etc.
Grille x 1Paint mask x 1
(Transparent)
Template x 1
TEMPLATE
GABARIT
Grille removal tool x 1
Operating instructions Butyl rubber tapes x 8
Front left Front right
Rear left Rear right
Center
Listening position

Specyfikacje produktu

Marka: Pioneer
Kategoria: głośnik
Model: Elite S-IW891

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer Elite S-IW891, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Pioneer

Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Pioneer

Pioneer X-CM66 Wit Instrukcja

12 Października 2024
Pioneer

Pioneer XPRS1182ST Instrukcja

5 Października 2024
Pioneer

Pioneer XPRS1152ST Instrukcja

5 Października 2024
Pioneer

Pioneer XPRS152 Instrukcja

5 Października 2024
Pioneer

Pioneer TS-C131PRS Instrukcja

29 Września 2024
Pioneer

Pioneer UD-RP351PRO Instrukcja

25 Września 2024
Pioneer

Pioneer TS-B401PRO Instrukcja

25 Września 2024
Pioneer

Pioneer TS-B351PRO Instrukcja

25 Września 2024
Pioneer

Pioneer UD-RP401PRO Instrukcja

25 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024
Yamaha

Yamaha CBR12 Instrukcja

13 Października 2024